feat: upgrade to clean 6.0 MHz zero-gap SPI driver for FCOB-2.7 with 5-bit encoding and add 6MHz clock test command

App/main.c

@@ -128,28 +128,33 @@ void UI_ShowSosPage(void);
  * WS2812B 幻彩 LED 单线驱动函数 (24MHz 1T 模式下精准时序控制)
  * ========================================================================= */
 
-const u16 code SPI_LUT[16] = {
+void WS2812_EncodeByte5(u8 v, u8 *buf)
-    0x924, 0x926, 0x934, 0x936, 0x9A4, 0x9A6, 0x9B4, 0x9B6,
-    0xD24, 0xD26, 0xD34, 0xD36, 0xDA4, 0xDA6, 0xDB4, 0xDB6
-};
-
-void WS2812_EncodeByte(u8 v, u8 *buf)
 {
-    u16 p1 = SPI_LUT[v >> 4];
+    u8 p7 = (v & 0x80) ? 0x1C : 0x18;
-    u16 p2 = SPI_LUT[v & 0x0F];
+    u8 p6 = (v & 0x40) ? 0x1C : 0x18;
-    buf[0] = p1 >> 4;
+    u8 p5 = (v & 0x20) ? 0x1C : 0x18;
-    buf[1] = ((p1 & 0x0F) << 4) | (p2 >> 8);
+    u8 p4 = (v & 0x10) ? 0x1C : 0x18;
-    buf[2] = p2;
+    u8 p3 = (v & 0x08) ? 0x1C : 0x18;
+    u8 p2 = (v & 0x04) ? 0x1C : 0x18;
+    u8 p1 = (v & 0x02) ? 0x1C : 0x18;
+    u8 p0 = (v & 0x01) ? 0x1C : 0x18;
+    
+    buf[0] = (p7 << 3) | (p6 >> 2);
+    buf[1] = (p6 << 6) | (p5 << 1) | (p4 >> 4);
+    buf[2] = (p4 << 4) | (p3 >> 1);
+    buf[3] = (p3 << 7) | (p2 << 2) | (p1 >> 3);
+    buf[4] = (p1 << 5) | p0;
 }
 
 void WS2812_Write24Bit(u8 g, u8 r, u8 b)
 {
-    u8 xdata buf[9];
+    u8 xdata buf[15];
     u8 m1_save, m0_save;
+    u8 i;
     
-    WS2812_EncodeByte(g, &buf[0]);
+    WS2812_EncodeByte5(g, &buf[0]);
-    WS2812_EncodeByte(r, &buf[3]);
+    WS2812_EncodeByte5(r, &buf[5]);
-    WS2812_EncodeByte(b, &buf[6]);
+    WS2812_EncodeByte5(b, &buf[10]);
     
     EA = 0;
     
@@ -159,17 +164,22 @@ void WS2812_Write24Bit(u8 g, u8 r, u8 b)
     P2M1 |= (1 << 5);
     P2M0 &= ~(1 << 5);
     
-    SPCTL = 0xD1; // Enable SPI at SYSCLK/8 (3.0 MHz)
+    SPCTL = 0xD0; // Enable SPI at SYSCLK/4 (6.0 MHz)
+    SPSTAT = 0xC0; // Clear flags
     
-    SPSTAT = 0xC0; SPDAT = buf[0]; while (!(SPSTAT & 0x80));
+    SPDAT = buf[0];
-    SPSTAT = 0xC0; SPDAT = buf[1]; while (!(SPSTAT & 0x80));
+    SPDAT = buf[1];
-    SPSTAT = 0xC0; SPDAT = buf[2]; while (!(SPSTAT & 0x80));
+    
-    SPSTAT = 0xC0; SPDAT = buf[3]; while (!(SPSTAT & 0x80));
+    for (i = 2; i < 15; i++)
-    SPSTAT = 0xC0; SPDAT = buf[4]; while (!(SPSTAT & 0x80));
+    {
-    SPSTAT = 0xC0; SPDAT = buf[5]; while (!(SPSTAT & 0x80));
+        while (!(SPSTAT & 0x80));
-    SPSTAT = 0xC0; SPDAT = buf[6]; while (!(SPSTAT & 0x80));
+        SPSTAT = 0xC0;
-    SPSTAT = 0xC0; SPDAT = buf[7]; while (!(SPSTAT & 0x80));
+        SPDAT = buf[i];
-    SPSTAT = 0xC0; SPDAT = buf[8]; while (!(SPSTAT & 0x80));
+    }
+    while (!(SPSTAT & 0x80));
+    SPSTAT = 0xC0;
+    while (!(SPSTAT & 0x80));
+    SPSTAT = 0xC0;
     
     SPCTL = 0x90; // Disable SPI
     WS2812_DI = 0;
@@ -193,10 +203,6 @@ void WS2812_Reset(void)
     }
 }
 
-/* =========================================================================
- * 延时与时间获取辅助函数 (12T/1T 自适应)
- * ========================================================================= */
-
 void Delay_ms(u16 ms)
 {
     u16 i, j;
@@ -1044,6 +1050,20 @@ void main(void)
                     Uart_SendString("[UART SIM] Ignore: Not in PAIR WAIT state\r\n");
                 }
             }
+            else if (cmd == 't' || cmd == 'T')
+            {
+                Uart_SendString("[UART SIM] SPI 6MHz Clock Test on P2.5 (SCLK) and P2.3 (MOSI) active. Press reset to exit.\r\n");
+                // Configure SCLK (P2.5) and MOSI (P2.3) as push-pull output
+                P2M1 &= ~((1 << 3) | (1 << 5));
+                P2M0 |=  ((1 << 3) | (1 << 5));
+                SPCTL = 0xD0; // SPI Master, 6.0 MHz (SYSCLK / 4)
+                while(1)
+                {
+                    SPSTAT = 0xC0;
+                    SPDAT = 0xAA;
+                    while (!(SPSTAT & 0x80));
+                }
+            }
             else if (cmd == '1')
             {
                 current_state = STATE_NORMAL;