stc32g128k/App/apps.c

#include "config.h"
#include "appmgr.h"
#include "../Drivers/lcd.h"
#include "../Drivers/rf.h"

/* =========================================================================
 * 全局变量声明（从 main.c 迁移）
 * ========================================================================= */

extern volatile u16 ms_tick;
extern volatile u32 pair_timeout_ms;
extern volatile u16 alarm_timer_ms;
extern volatile bit alarm_flash_flag;

extern SystemState current_state;
extern u8 current_hour, current_min;
extern u8 menu_select;
extern u32 captured_addr;
extern u8 captured_type;
extern u8 alarm_sensor_slot;

extern Sensor_Slot xdata sensor_list[16];

extern sbit MOTOR;
extern bit LED_R, LED_G, LED_B;
extern bit rgb_test_mode;

extern char *code default_names[5];
extern u8 code default_zones[5];
extern char *code menu_items[5];

extern void Delay_ms(u16 ms);
extern void Format_Sensor_Name(u8 slot, char *buf);
extern void Uart_SendString(char *s);
extern void Uart_SendHex8(u8 val);

/* =========================================================================
 * 应用私有状态变量
 * ========================================================================= */

// 时钟应用状态
static bit clock_redraw_flag = 0;

// 配对应用状态
static u8 pair_menu_select = 0;
static u8 pair_state = 0; // 0: MENU, 1: WAIT, 2: CONFIRM, 3: SUCCESS, 4: FAIL

// 报警应用状态
static u8 alarm_last_frame = 99;

// SOS应用状态
static u8 sos_last_tx = 99;

/* =========================================================================
 * 时钟应用实现
 * ========================================================================= */

static void ClockApp_OnStart(void)
{
    Uart_SendString("[APP] ClockApp Started\r\n");
    current_state = STATE_NORMAL;
    clock_redraw_flag = 1;
}

static void ClockApp_onRun(void)
{
    // 分钟变化时重绘时钟
    if (clock_redraw_flag)
    {
        clock_redraw_flag = 0;
        UI_ShowClockPage(current_state, current_hour, current_min);
    }
    
    // 监听射频信号（后台监测）
    {
        u32 rx_addr;
        u8 rx_data;
        if (EV1527_Decode(&rx_addr, &rx_data))
        {
            u8 slot;
            if (Check_Sensor_ID(rx_addr, &slot))
            {
                u32 slot_addr = ((u32)sensor_list[slot].addr[0] << 16) |
                                 ((u32)sensor_list[slot].addr[1] << 8) |
                                 sensor_list[slot].addr[2];
                u8 sensor_type = slot_addr & 0x0F;
                
                if (sensor_type < 5)
                {
                    u8 zone = default_zones[sensor_type];
                    if (zone == 0 || current_state == STATE_ARMED)
                    {
                        captured_addr = rx_addr;
                        alarm_sensor_slot = slot;
                        AppManager_StartApp(APP_ID_ALARM);
                    }
                }
            }
        }
    }
}

static void ClockApp_onClose(void)
{
    Uart_SendString("[APP] ClockApp Closed\r\n");
}

static EventResult ClockApp_onEvent(SystemEvent evt)
{
    // 处理定时器发送的时钟更新事件（priority为LOW，key_event为NONE）
    if (evt.key_event == KEY_EVENT_NONE && evt.priority == EVENT_PRIORITY_LOW)
    {
        // 从extra_data中提取时间信息
        u8 hour = (u8)(evt.extra_data >> 8);
        u8 min = (u8)(evt.extra_data & 0xFF);
        
        // 更新时钟显示
        UI_ShowClockPage(current_state, hour, min);
        return EVENT_HANDLED;
    }
    
    switch (evt.key_event)
    {
        case KEY_EVENT_UP_DOWN_COMB:
            // 组合键进入菜单
            AppManager_StartApp(APP_ID_MENU);
            return EVENT_HANDLED;
            
        case KEY_EVENT_SOS_CLICK:
            // 短按SOS进入求救模式
            AppManager_StartApp(APP_ID_SOS);
            return EVENT_HANDLED;
            
        case KEY_EVENT_SOS_LONG:
            // 长按SOS绑定IPC
            UI_ShowBindingPage();
            RF_SetMode(2);
            EV1527_Transmit(CLONED_ADDR, 0x01);
            RF_SetMode(0);
            Delay_ms(2000);
            AppManager_StartApp(APP_ID_CLOCK);
            return EVENT_HANDLED;
            
        default:
            return EVENT_IGNORED;
    }
}

/* =========================================================================
 * 菜单应用实现
 * ========================================================================= */

static void MenuApp_OnStart(void)
{
    Uart_SendString("[APP] MenuApp Started\r\n");
    pair_menu_select = 0;
    RF_SetMode(0);
    UI_ShowPairMenuPage(pair_menu_select);
}

static void MenuApp_onRun(void)
{
    // 菜单应用无持续运行逻辑
}

static void MenuApp_onClose(void)
{
    Uart_SendString("[APP] MenuApp Closed\r\n");
    RF_SetMode(1);
}

static EventResult MenuApp_onEvent(SystemEvent evt)
{
    switch (evt.key_event)
    {
        case KEY_EVENT_UP_CLICK:
            if (pair_menu_select > 0)
            {
                pair_menu_select--;
                UI_ShowPairMenuPage(pair_menu_select);
            }
            return EVENT_HANDLED;
            
        case KEY_EVENT_DOWN_CLICK:
            if (pair_menu_select < 4)
            {
                pair_menu_select++;
                UI_ShowPairMenuPage(pair_menu_select);
            }
            return EVENT_HANDLED;
            
        case KEY_EVENT_SOS_CLICK:
            // 确认进入配对等待
            MOTOR = 1;
            Delay_ms(100);
            MOTOR = 0;
            
            AppManager_StartApp(APP_ID_PAIR);
            return EVENT_HANDLED;
            
        case KEY_EVENT_DOWN_LONG:
            // 长按返回时钟
            AppManager_CloseApp();
            return EVENT_HANDLED;
            
        default:
            return EVENT_IGNORED;
    }
}

/* =========================================================================
 * 配对应用实现
 * ========================================================================= */

static void PairApp_OnStart(void)
{
    Uart_SendString("[APP] PairApp Started\r\n");
    pair_state = 1; // 进入等待状态
    pair_timeout_ms = 0;
    captured_type = pair_menu_select;
    
    RF_SetMode(1);
    LCD_Clear(COLOR_BLACK);
    LCD_ShowStringCentered(135, "RECHERCHE...", COLOR_WHITE, COLOR_BLACK);
    LCD_ShowStringCentered(160, "DECLENCH. CAPT", COLOR_CYAN, COLOR_BLACK);
    UI_ShowPairWaitPage(0);
}

static void PairApp_onRun(void)
{
    switch (pair_state)
    {
        case 1: // WAIT状态
        {
            // 雷达动画
            u8 frame = (u8)((ms_tick / 250) % 3);
            static u8 last_frame = 99;
            if (frame != last_frame)
            {
                last_frame = frame;
                UI_ShowPairWaitPage(frame);
            }
            
            // 监听射频信号
            u32 rx_addr;
            u8 rx_data;
            if (EV1527_Decode(&rx_addr, &rx_data))
            {
                captured_addr = rx_addr;
                pair_state = 2; // 进入确认状态
                
                RF_SetMode(0);
                UI_ShowPairConfirmPage(captured_addr);
            }
            
            // 超时检测
            if (pair_timeout_ms >= 30000UL)
            {
                pair_timeout_ms = 0;
                UI_ShowPairFailPage(1);
                Delay_ms(2500);
                AppManager_CloseApp();
            }
            break;
        }
        
        case 2: // CONFIRM状态
            // 等待用户操作
            break;
            
        case 3: // SUCCESS状态
            // 成功动画已在事件处理中完成
            break;
            
        default:
            break;
    }
}

static void PairApp_onClose(void)
{
    Uart_SendString("[APP] PairApp Closed\r\n");
    RF_SetMode(1);
    pair_state = 0;
}

static EventResult PairApp_onEvent(SystemEvent evt)
{
    switch (pair_state)
    {
        case 1: // WAIT状态
        {
            if (evt.key_event == KEY_EVENT_DOWN_LONG)
            {
                AppManager_CloseApp();
                return EVENT_HANDLED;
            }
            break;
        }
        
        case 2: // CONFIRM状态
        {
            if (evt.key_event == KEY_EVENT_SOS_LONG)
            {
                // 保存对码
                Add_Sensor(captured_addr, captured_type);
                
                pair_state = 3; // 进入成功状态
                UI_ShowPairSuccessPage(captured_addr);
                
                // 物理反馈
                MOTOR = 1;
                LED_G = 0;
                LED_R = 1;
                LED_B = 1;
                Delay_ms(400);
                MOTOR = 0;
                
                Delay_ms(1600);
                LED_G = 1;
                
                Delay_ms(500);
                AppManager_CloseApp();
                return EVENT_HANDLED;
            }
            else if (evt.key_event == KEY_EVENT_DOWN_LONG)
            {
                AppManager_CloseApp();
                return EVENT_HANDLED;
            }
            break;
        }
        
        default:
            break;
    }
    
    return EVENT_IGNORED;
}

/* =========================================================================
 * 报警应用实现
 * ========================================================================= */

static void AlarmApp_OnStart(void)
{
    Uart_SendString("[APP] AlarmApp Started\r\n");
    current_state = STATE_ALARM;
    
    u8 slot = alarm_sensor_slot;
    static char alarm_name[24];
    char *name = "UNKNOWN SENSOR";
    
    if (Check_Sensor_ID(captured_addr, &slot))
    {
        Format_Sensor_Name(slot, alarm_name);
        name = alarm_name;
    }
    
    UI_ShowAlarmPage(name, 1);
    
    // 重置报警定时器
    alarm_timer_ms = 0;
}

static void AlarmApp_onRun(void)
{
    // 警报边框闪烁效果
    if (alarm_flash_flag)
    {
        LCD_DrawRectBorder(4, 4, 112, 232, COLOR_RED);
    }
    else
    {
        LCD_DrawRectBorder(4, 4, 112, 232, COLOR_BLACK);
    }
}

static void AlarmApp_onClose(void)
{
    Uart_SendString("[APP] AlarmApp Closed\r\n");
    current_state = STATE_NORMAL;
    
    // 停止报警效果
    MOTOR = 0;
    LED_R = 1;
    LED_G = 1;
    LED_B = 1;
}

static EventResult AlarmApp_onEvent(SystemEvent evt)
{
    // 任何按键都可以清除报警
    if (evt.key_event != KEY_EVENT_NONE)
    {
        AppManager_CloseApp();
        return EVENT_HANDLED;
    }
    
    return EVENT_IGNORED;
}

/* =========================================================================
 * SOS应用实现
 * ========================================================================= */

static void SOSApp_OnStart(void)
{
    Uart_SendString("[APP] SOSApp Started\r\n");
    current_state = STATE_SOS_EMITTED;
    UI_ShowSosPage();
}

static void SOSApp_onRun(void)
{
    // 每500ms发射一次射频求救帧
    u8 sec_phase = (u8)((ms_tick / 500) % 2);
    if (sec_phase != sos_last_tx)
    {
        sos_last_tx = sec_phase;
        RF_SetMode(2);
        EV1527_Transmit(CLONED_ADDR, 0x08);
        RF_SetMode(0);
    }
    
    // 红色警告边框闪烁
    if (alarm_flash_flag)
    {
        LCD_DrawRectBorder(4, 4, 112, 232, COLOR_RED);
        LCD_DrawRectBorder(8, 8, 104, 224, COLOR_WHITE);
    }
    else
    {
        LCD_DrawRectBorder(4, 4, 112, 232, COLOR_BLACK);
        LCD_DrawRectBorder(8, 8, 104, 224, COLOR_BLACK);
    }
}

static void SOSApp_onClose(void)
{
    Uart_SendString("[APP] SOSApp Closed\r\n");
    current_state = STATE_NORMAL;
    
    // 停止求救效果
    MOTOR = 0;
    LED_R = 1;
    LED_G = 1;
    LED_B = 1;
}

static EventResult SOSApp_onEvent(SystemEvent evt)
{
    // 长按任意键解除求救
    if (evt.key_event == KEY_EVENT_SOS_LONG || 
        evt.key_event == KEY_EVENT_UP_LONG || 
        evt.key_event == KEY_EVENT_DOWN_LONG)
    {
        AppManager_CloseApp();
        return EVENT_HANDLED;
    }
    
    return EVENT_IGNORED;
}

/* =========================================================================
 * 应用注册函数
 * ========================================================================= */

void Apps_RegisterAll(void)
{
    // 注册时钟应用（前台）
    AppManager_RegisterApp(APP_ID_CLOCK, APP_TYPE_FOREGROUND, "Clock",
                           ClockApp_OnStart, ClockApp_onRun,
                           ClockApp_onClose, ClockApp_onEvent);
    
    // 注册菜单应用（前台）
    AppManager_RegisterApp(APP_ID_MENU, APP_TYPE_FOREGROUND, "Menu",
                           MenuApp_OnStart, MenuApp_onRun,
                           MenuApp_onClose, MenuApp_onEvent);
    
    // 注册配对应用（前台）
    AppManager_RegisterApp(APP_ID_PAIR, APP_TYPE_FOREGROUND, "Pair",
                           PairApp_OnStart, PairApp_onRun,
                           PairApp_onClose, PairApp_onEvent);
    
    // 注册报警应用（前台）
    AppManager_RegisterApp(APP_ID_ALARM, APP_TYPE_FOREGROUND, "Alarm",
                           AlarmApp_OnStart, AlarmApp_onRun,
                           AlarmApp_onClose, AlarmApp_onEvent);
    
    // 注册SOS应用（前台）
    AppManager_RegisterApp(APP_ID_SOS, APP_TYPE_FOREGROUND, "SOS",
                           SOSApp_OnStart, SOSApp_onRun,
                           SOSApp_onClose, SOSApp_onEvent);
    
    Uart_SendString("[APP] All applications registered\r\n");
}