stc32g128k/Drivers/lcd.c

#include "lcd.h"
#include "lcd_font.h"
#include "../App/config.h"
#include "intrins.h"

// RM69310 屏幕接口引脚
sbit LCD_RST  = P1^0;  // 硬件复位
sbit LCD_DCX  = P1^1;  // 数据/命令选择
sbit LCD_SDI  = P1^4;  // SPI 数据输入 (MOSI)
sbit LCD_SCL  = P1^5;  // SPI 时钟 (SCLK)
sbit LCD_CS   = P1^6;  // SPI 片选 (CS)

// SGM3833 电源芯片控制脚
sbit SGM_CTRL = P3^4;

// External delay functions defined in main.c
extern void Delay_ms(u16 ms);
extern void Delay10us(void);

void SGM_SendPulse(u8 pulse_cnt)
{
    u8 i;
    SGM_CTRL = 0;
    Delay_ms(5); // 确保进入关断/复位状态 (tOFF)
    SGM_CTRL = 1;
    Delay_ms(5); // 确保充分初始化 (tINIT >= 300us)
    for(i = 0; i < pulse_cnt; i++)
    {
        SGM_CTRL = 0;
        Delay10us();
        SGM_CTRL = 1;
        Delay10us();
    }
    SGM_CTRL = 1;
    Delay_ms(5); // 确保数据稳定存储 (tSTORE >= 80us)
}

void SPI_SendData(u8 dat)
{
    u8 i;
    for(i = 0; i < 8; i++)
    {
        LCD_SCL = 0;
        if(dat & 0x80)
            LCD_SDI = 1;
        else
            LCD_SDI = 0;
        _nop_();
        LCD_SCL = 1;
        _nop_();
        dat <<= 1;
    }
}

void WriteComm(u8 cmd)
{
    LCD_CS = 0;
    LCD_DCX = 0; // 命令模式
    SPI_SendData(cmd);
    LCD_CS = 1;
}

void WriteData(u8 dat)
{
    LCD_CS = 0;
    LCD_DCX = 1; // 数据模式
    SPI_SendData(dat);
    LCD_CS = 1;
}

void LCD_Reset(void)
{
    LCD_RST = 1;
    Delay_ms(10);
    LCD_RST = 0;
    Delay_ms(20);
    LCD_RST = 1;
    Delay_ms(120);
}

void LCD_Init(void)
{
    // Configure LCD pins as push-pull output
    P1M1 &= ~((1<<0) | (1<<1) | (1<<4) | (1<<5) | (1<<6));
    P1M0 |=  ((1<<0) | (1<<1) | (1<<4) | (1<<5) | (1<<6));

    // Configure P3.4 (SGM_CTRL) as push-pull output
    P3M1 &= ~(1 << 4);
    P3M0 |=  (1 << 4);

    SGM_CTRL = 1;
    LCD_CS = 1;
    LCD_SCL = 1;
    LCD_RST = 1;
    LCD_DCX = 1;

    LCD_Reset();

    // 寄存器配置（源自 Truly 信利官方初始化配置）
    WriteComm(0xFE);WriteData(0x01);
    WriteComm(0x04);WriteData(0xa0);  // SPI write ram enable
    WriteComm(0x05);WriteData(0x70);  // 128RGB
    WriteComm(0x06);WriteData(0x3C);  // NL = 240 line
    WriteComm(0x25);WriteData(0x06);  // normal mode: gamma1
    WriteComm(0x26);WriteData(0x80);  // T1A = 280
    WriteComm(0x27);WriteData(0x12);  // normal mode VBP = 12
    WriteComm(0x28);WriteData(0x12);  // normal mode VFP = 8
    WriteComm(0x2A);WriteData(0x06);  // idle mode: gamma1
    WriteComm(0x2B);WriteData(0x80);  // T1B = 280
    WriteComm(0x2D);WriteData(0x12);  // idle mode VBP = 12
    WriteComm(0x2F);WriteData(0x12);  // idle mode VFP = 8
    WriteComm(0x37);WriteData(0x0C);  // precharge to VGSP
    WriteComm(0x6D);WriteData(0x18);  // skip frame VGMP and VGSP regulator off
    WriteComm(0x29);WriteData(0x01);  // normal mode skip frame off
    WriteComm(0x30);WriteData(0x43);  // idle mode skip frame = 60/2 = 30Hz
    WriteComm(0x0E);WriteData(0x83);  // AVDD = 5.6V normal mode
    WriteComm(0x0F);WriteData(0x83);  // AVDD = 5.6V idle mode
    WriteComm(0x10);WriteData(0x71);  // AVDD = 3xVCI
    WriteComm(0x11);WriteData(0xb3);  // VCL = -2xVCI
    WriteComm(0x12);WriteData(0xb3);  // VCL = -2xVCI
    WriteComm(0x13);WriteData(0x80);  // VGH = AVDD normal mode
    WriteComm(0x14);WriteData(0x80);  // VGH = AVDD idle mode
    WriteComm(0x15);WriteData(0x81);  // VGL = VCL - VCI normal mode
    WriteComm(0x16);WriteData(0x81);  // VGL = VCL - VCI idle mode
    WriteComm(0x18);WriteData(0x66);  // VGHR = 6V normal/idle mode
    WriteComm(0x19);WriteData(0x44);  // VGLR = -6V normal/idle mode
    WriteComm(0x1E);WriteData(0x02);  // Switch EQ on
    WriteComm(0x5B);WriteData(0x10);  // VREFN5 on
    WriteComm(0x62);WriteData(0x19);  // VREFN5 = -3V normal mode
    WriteComm(0x63);WriteData(0x19);  // VREFN5 = -3V idle mode
    WriteComm(0x70);WriteData(0x55);  // display off SD to AVDD
    WriteComm(0x1D);WriteData(0x02);  // Switch EQ on
    WriteComm(0x89);WriteData(0x18);  // VGMP = 5.5V
    WriteComm(0x8A);WriteData(0xb9);  // VGSP = 2V
    WriteComm(0x8B);WriteData(0x01);  // VGMP VGSP high byte
    WriteComm(0x8C);WriteData(0x10);  // VGMP = 5.4V
    WriteComm(0x8D);WriteData(0x90);  // VGSP = 2V
    WriteComm(0x8E);WriteData(0x01);  // VGMP VGSP high byte
    WriteComm(0x6E);WriteData(0x0A);  // MIPI interface off
    WriteComm(0x6A);WriteData(0x05);  // MUX
    WriteComm(0x3A);WriteData(0x08);  // T1_sd
    WriteComm(0x3B);WriteData(0x00);  // Tp_sd
    WriteComm(0x3D);WriteData(0x16);  // Th_sd
    WriteComm(0x3F);WriteData(0x27);  // Tsw_sd
    WriteComm(0x40);WriteData(0x0F);  // Thsw_sd
    WriteComm(0x41);WriteData(0x0D);  // Thsd_sd

    WriteComm(0x42);WriteData(0x14);  // Mux 142536
    WriteComm(0x43);WriteData(0x41);
    WriteComm(0x44);WriteData(0x25);
    WriteComm(0x45);WriteData(0x52);
    WriteComm(0x46);WriteData(0x36);
    WriteComm(0x47);WriteData(0x63);
    WriteComm(0x48);WriteData(0x14);
    WriteComm(0x49);WriteData(0x41);
    WriteComm(0x4A);WriteData(0x25);
    WriteComm(0x4B);WriteData(0x52);
    WriteComm(0x4C);WriteData(0x36);
    WriteComm(0x4D);WriteData(0x63);
    WriteComm(0x4E);WriteData(0x14);  // Data R1R2G1G2B1B2
    WriteComm(0x4F);WriteData(0x41);
    WriteComm(0x50);WriteData(0x25);
    WriteComm(0x51);WriteData(0x52);
    WriteComm(0x52);WriteData(0x36);
    WriteComm(0x53);WriteData(0x63);
    WriteComm(0x54);WriteData(0x14);
    WriteComm(0x55);WriteData(0x41);
    WriteComm(0x56);WriteData(0x25);
    WriteComm(0x57);WriteData(0x52);
    WriteComm(0x58);WriteData(0x36);
    WriteComm(0x59);WriteData(0x63);

    WriteComm(0x66);WriteData(0x90);  // idle mode internal power
    WriteComm(0x67);WriteData(0x40);  // internal power delay 1 frame off
    WriteComm(0x72);WriteData(0x1A);  // internal OVDD = 4.6V
    WriteComm(0x73);WriteData(0x07);  // internal OVSS = -2V
    WriteComm(0x74);WriteData(0x0C);  // OVDD power from AVDD
    WriteComm(0x6A);WriteData(0x3D);  // swire 61=0x3D pulse
    WriteComm(0x6B);WriteData(0x29);  // swire 41=0x29 pulse

    WriteComm(0xFE);WriteData(0x04);
    WriteComm(0x5E);WriteData(0x01);
    WriteComm(0x5F);WriteData(0xB8);
    WriteComm(0x60);WriteData(0xBB);
    WriteComm(0x61);WriteData(0xBB);
    WriteComm(0x62);WriteData(0xBB);
    WriteComm(0x76);WriteData(0xBB);
    WriteComm(0x77);WriteData(0x3B);
    WriteComm(0x78);WriteData(0x92);
    WriteComm(0x79);WriteData(0xBB);
    WriteComm(0x7A);WriteData(0xBB);

    WriteComm(0x00);WriteData(0xDC);  // SN_CK1
    WriteComm(0x01);WriteData(0x00);
    WriteComm(0x02);WriteData(0x02);
    WriteComm(0x03);WriteData(0x00);
    WriteComm(0x04);WriteData(0x08);
    WriteComm(0x05);WriteData(0x01);
    WriteComm(0x06);WriteData(0x70);
    WriteComm(0x07);WriteData(0x0A);
    WriteComm(0x08);WriteData(0x00);

    WriteComm(0x09);WriteData(0xDC);  // SN_CK2
    WriteComm(0x0a);WriteData(0x00);
    WriteComm(0x0b);WriteData(0x02);
    WriteComm(0x0C);WriteData(0x00);
    WriteComm(0x0D);WriteData(0x08);
    WriteComm(0x0E);WriteData(0x00);
    WriteComm(0x0F);WriteData(0x70);
    WriteComm(0x10);WriteData(0x0A);
    WriteComm(0x11);WriteData(0x00);

    WriteComm(0x12);WriteData(0xCC);  // EM_CK1
    WriteComm(0x13);WriteData(0x00);
    WriteComm(0x14);WriteData(0x02);
    WriteComm(0x15);WriteData(0x00);
    WriteComm(0x16);WriteData(0x20);
    WriteComm(0x17);WriteData(0x00);
    WriteComm(0x18);WriteData(0x28);
    WriteComm(0x19);WriteData(0x26);
    WriteComm(0x1A);WriteData(0x00);

    WriteComm(0x1B);WriteData(0xCC);  // EM_CK2
    WriteComm(0x1C);WriteData(0x00);
    WriteComm(0x1D);WriteData(0x02);
    WriteComm(0x1E);WriteData(0x00);
    WriteComm(0x1F);WriteData(0x20);
    WriteComm(0x20);WriteData(0x01);
    WriteComm(0x21);WriteData(0x28);
    WriteComm(0x22);WriteData(0x26);
    WriteComm(0x23);WriteData(0x00);

    WriteComm(0x4C);WriteData(0x89);  // SN_STV
    WriteComm(0x4D);WriteData(0x00);
    WriteComm(0x4E);WriteData(0x01);
    WriteComm(0x4F);WriteData(0x00);
    WriteComm(0x50);WriteData(0x01);
    WriteComm(0x51);WriteData(0xBB);
    WriteComm(0x52);WriteData(0xBB);

    WriteComm(0x53);WriteData(0xCA);  // EM_STV
    WriteComm(0x54);WriteData(0x00);
    WriteComm(0x55);WriteData(0x03);
    WriteComm(0x56);WriteData(0x00);
    WriteComm(0x58);WriteData(0x00);
    WriteComm(0x59);WriteData(0x00);
    WriteComm(0x65);WriteData(0x45);  // 04
    WriteComm(0x66);WriteData(0x0C);  // 03
    WriteComm(0x67);WriteData(0x00);  // 10

    WriteComm(0xFE);WriteData(0x01);  // ID
    WriteComm(0xE5);WriteData(0x00);
    WriteComm(0xE6);WriteData(0x10);
    WriteComm(0xE7);WriteData(0x31);

    WriteComm(0xFE);WriteData(0x00);  // 切换到 Page 0
    WriteComm(0xC4);WriteData(0x80);
    WriteComm(0x2A);WriteData(0x00);WriteData(0x04);WriteData(0x00);WriteData(0x7B); // 设置列

    // 显式设置 16 位像素格式 (COLMOD = 0x75)
    WriteComm(0x3A);WriteData(0x75);

    WriteComm(0x11);WriteData(0x00);  // 退出睡眠
    Delay_ms(150);

    WriteComm(0x29);WriteData(0x00);  // 开启显示
    Delay_ms(20);
}

void LCD_SetWindow(u16 x_start, u16 x_end, u16 y_start, u16 y_end)
{
    WriteComm(0x2A);
    WriteData((u8)(x_start >> 8));
    WriteData((u8)(x_start & 0xFF));
    WriteData((u8)(x_end >> 8));
    WriteData((u8)(x_end & 0xFF));

    WriteComm(0x2B);
    WriteData((u8)(y_start >> 8));
    WriteData((u8)(y_start & 0xFF));
    WriteData((u8)(y_end >> 8));
    WriteData((u8)(y_end & 0xFF));
}

void LCD_Clear(u16 color)
{
    u16 i, j;
    LCD_SetWindow(4, 123, 0, 239);
    WriteComm(0x2C);
    for(i = 0; i < 120; i++)
    {
        for(j = 0; j < 240; j++)
        {
            WriteData((u8)(color >> 8));
            WriteData((u8)(color & 0xFF));
        }
    }
}

void LCD_FillRect(u16 x, u16 y, u16 w, u16 h, u16 color)
{
    u16 i, count;
    u8 ch = (u8)(color >> 8);
    u8 cl = (u8)(color & 0xFF);
    LCD_SetWindow(x + 4, x + w - 1 + 4, y, y + h - 1);
    WriteComm(0x2C);
    count = w * h;
    for(i = 0; i < count; i++)
    {
        WriteData(ch);
        WriteData(cl);
    }
}

void LCD_DrawRectBorder(u16 x, u16 y, u16 w, u16 h, u16 color)
{
    LCD_FillRect(x, y, w, 1, color);
    LCD_FillRect(x, y + h - 1, w, 1, color);
    LCD_FillRect(x, y, 1, h, color);
    LCD_FillRect(x + w - 1, y, 1, h, color);
}

void LCD_DrawMonoBitmap(u16 x, u16 y, u16 w, u16 h, unsigned char code *bmp, u16 color, u16 bg_color)
{
    u16 r, c;
    u16 byte_width = (w + 7) / 8;
    u8 ch = (u8)(color >> 8);
    u8 cl = (u8)(color & 0xFF);
    u8 bgh = (u8)(bg_color >> 8);
    u8 bgl = (u8)(bg_color & 0xFF);
    
    LCD_SetWindow(x + 4, x + w - 1 + 4, y, y + h - 1);
    WriteComm(0x2C);
    for(r = 0; r < h; r++)
    {
        for(c = 0; c < w; c++)
        {
            u16 byte_idx = r * byte_width + (c / 8);
            u8 bit_shift = 7 - (c % 8);
            if(bmp[byte_idx] & (1 << bit_shift))
            {
                WriteData(ch);
                WriteData(cl);
            }
            else
            {
                WriteData(bgh);
                WriteData(bgl);
            }
        }
    }
}

void LCD_ShowChar8x16(u16 x, u16 y, char ch, u16 color, u16 bg_color)
{
    u8 r, c;
    u8 char_idx = ch - 0x20;
    u8 f_h = (u8)(color >> 8);
    u8 f_l = (u8)(color & 0xFF);
    u8 b_h = (u8)(bg_color >> 8);
    u8 b_l = (u8)(bg_color & 0xFF);
    
    if(ch < 0x20 || ch > 0x7E) return;
    
    LCD_SetWindow(x + 4, x + 8 - 1 + 4, y, y + 16 - 1);
    WriteComm(0x2C);
    for(r = 0; r < 16; r++)
    {
        u8 line = FONT_8x16[char_idx][r];
        for(c = 0; c < 8; c++)
        {
            if(line & (0x80 >> c))
            {
                WriteData(f_h);
                WriteData(f_l);
            }
            else
            {
                WriteData(b_h);
                WriteData(b_l);
            }
        }
    }
}

void LCD_ShowString(u16 x, u16 y, char *str, u16 color, u16 bg_color)
{
    while(*str)
    {
        LCD_ShowChar8x16(x, y, *str, color, bg_color);
        x += 8;
        str++;
    }
}

void LCD_ShowStringCentered(u16 y, char *str, u16 color, u16 bg_color)
{
    u16 len = 0;
    char *p = str;
    while(*p++) len++;
    if(len * 8 >= 120)
        LCD_ShowString(0, y, str, color, bg_color);
    else
        LCD_ShowString((120 - len * 8) / 2, y, str, color, bg_color);
}

void LCD_ShowChar16x32(u16 x, u16 y, char ch, u16 color, u16 bg_color)
{
    u8 r, c, i, j;
    u8 char_idx = ch - 0x20;
    u8 f_h = (u8)(color >> 8);
    u8 f_l = (u8)(color & 0xFF);
    u8 b_h = (u8)(bg_color >> 8);
    u8 b_l = (u8)(bg_color & 0xFF);
    
    if(ch < 0x20 || ch > 0x7E) return;
    
    LCD_SetWindow(x + 4, x + 16 - 1 + 4, y, y + 32 - 1);
    WriteComm(0x2C);
    for(r = 0; r < 16; r++)
    {
        u8 line = FONT_8x16[char_idx][r];
        for(i = 0; i < 2; i++)
        {
            for(c = 0; c < 8; c++)
            {
                u8 val_bit = (line & (0x80 >> c));
                for(j = 0; j < 2; j++)
                {
                    if(val_bit)
                    {
                        WriteData(f_h);
                        WriteData(f_l);
                    }
                    else
                    {
                        WriteData(b_h);
                        WriteData(b_l);
                    }
                }
            }
        }
    }
}

void LCD_ShowString16x32(u16 x, u16 y, char *str, u16 color, u16 bg_color)
{
    while(*str)
    {
        LCD_ShowChar16x32(x, y, *str, color, bg_color);
        x += 16;
        str++;
    }
}

void LCD_ShowString16x32Centered(u16 y, char *str, u16 color, u16 bg_color)
{
    u16 len = 0;
    char *p = str;
    while(*p++) len++;
    if(len * 16 >= 120)
        LCD_ShowString16x32(0, y, str, color, bg_color);
    else
        LCD_ShowString16x32((120 - len * 16) / 2, y, str, color, bg_color);
}

// Touched to align with doc updates V3