zouhaitao/TAIXIN
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
main
TAIXIN/sdk/app/app_lcd/app_lcd.c

627 lines
22 KiB
C
Raw Permalink Blame History

#include "basic_include.h"
#include "hal/lcdc.h"
#include "hal/spi.h"
#include "hal/dsi.h"
#include "dev/lcdc/hglcdc.h"
#include "lib/lcd/lcd.h"
#include "lib/multimedia/msi.h"
#include "stream_frame.h"
#include "app_lcd.h"
#include "user_work/user_work.h"
#ifdef PIN_FROM_PARAM
#include "pin_param.h"
#endif
#ifdef LCD_EN
#define LCD_ROTATE_LINE 64
#define OSD_EN 1
#define LCD_SCREEN_RECORD_EN 0 // 录屏功能
struct app_lcd_s lcd_msg_s;
void lcd_hardware_init565();
void lcd_hardware_init666();
extern void lcd_register_read_3line(struct spi_device *spi_dev, uint32 code, uint8 *buf, uint32 len);
extern void lcd_table_init(struct spi_device *spi_dev, uint8_t *lcd_table);
extern void lcd_table_init_MCU(struct lcdc_device *lcd_dev, uint8_t (*lcd_table)[2]);
extern void lcd_reg_table_init(struct lcdc_device *lcd_dev, uint8 lcd_bus_type, uint8_t *lcd_table);
// 暂时没有作处理
static void lcd_timeout1(uint32 irq_flag, uint32 irq_data, uint32 param1)
{
struct app_lcd_s *lcd_s = (struct app_lcd_s *) irq_data;
struct lcdc_device *lcd_dev = lcd_s->lcd_dev;
lcdc_set_timeout_info(lcd_dev, 0, 3);
os_printf("lcd_timeout\r\n");
// 出现timeout,说明可能哪里卡住了,让应用层重新启动
lcd_s->hardware_ready = 1;
lcd_s->rekick_lcd = 1;
}
// 暂时没有作处理
static void lcd_te_isr1(uint32 irq_flag, uint32 irq_data, uint32 param1)
{
os_printf("%s:%d\n", __FUNCTION__, __LINE__);
struct app_lcd_s *lcd_s = (struct app_lcd_s *) irq_data;
struct lcdc_device *lcd_dev;
lcd_dev = lcd_s->lcd_dev;
os_printf("--------------------------------------------te------------------"
"---------------\r\n");
}
static void lcd_squralbuf_done1(uint32 irq_flag, uint32 irq_data, uint32 param1)
{
struct app_lcd_s *lcd_s = (struct app_lcd_s *) irq_data;
// 理论这里只是唤醒信号量之类,由线程来决定是否继续显示
// os_printf("%s:%d\n",__FUNCTION__,__LINE__);
#if LCD_SCREEN_RECORD_EN
static uint32 lcd_num = 0;
static uint32 dither = 0;
if ((lcd_num % 200) == 0)
{
os_printf("---------------------------------------------------------\r\n");
if (dither == 1)
{
lcdc_dither_en(lcd_s->lcd_dev, 0);
lcdc_screen_start(lcd_s->lcd_dev, 1);
dither = 0;
}
else
{
lcdc_dither_en(lcd_s->lcd_dev, 1);
lcdc_screen_start(lcd_s->lcd_dev, 1);
dither = 1;
}
}
#endif
lcd_s->end_time = os_jiffies();
lcd_s->refresh_time = lcd_s->end_time - lcd_s->start_time;
if (lcd_s->hardware_auto_ks)
{
lcd_s->hardware_ready = 0;
// 判断是否启动了硬件自动kick
if (!lcd_s->get_auto_ks)
{
// 启动自动kick
lcd_s->get_auto_ks = 1;
lcdc_video_enable_auto_ks(lcd_s->lcd_dev, 1);
}
}
else
{
if (lcd_s->get_auto_ks)
{
lcd_s->get_auto_ks = 0;
lcdc_video_enable_auto_ks(lcd_s->lcd_dev, 0);
}
else
{
lcd_s->hardware_ready = 1;
}
}
lcd_s->app_lcd_cb(lcd_s);
#if 1
uint32_t st0, st1;
struct dsi_device *dsi_dev;
dsi_dev = lcd_s->lcd_dsi_dev; //(struct dsi_device *)dev_get(HG_DSI_DEVID);
st0 = mipi_dsi_get_sta0(dsi_dev);
st1 = mipi_dsi_get_sta1(dsi_dev);
if ((st0 != 0) || (st1 != 0))
{
os_printf("L(%08x %08x)\r\n", st0, st1);
mipi_dsi_reset_module(dsi_dev);
}
#endif
}
#if LCD_SCREEN_RECORD_EN
static void lcd_screen_finish(uint32 irq_flag, uint32 irq_data, uint32 param1)
{
os_printf("%s %d\r\n", __func__, __LINE__);
}
#endif
uint8_t g_read_hardware_auto_ks()
{
// os_printf("%s:%d\n",__FUNCTION__,__LINE__);
return lcd_msg_s.get_auto_ks;
}
uint8_t g_set_hardware_auto_ks(uint8_t en)
{
uint32_t flags;
uint32_t timeout = 0;
if (en)
{
lcd_msg_s.hardware_auto_ks = en;
while (!lcd_msg_s.get_auto_ks && (timeout < 100))
{
timeout++;
os_sleep_ms(1);
}
}
else
{
flags = disable_irq();
lcd_msg_s.hardware_auto_ks = en;
enable_irq(flags);
}
return lcd_msg_s.get_auto_ks;
}
// 返回的是osd旋转和w h
static void get_osd_w_h(uint16_t *w, uint16_t *h, uint8_t *rotate)
{
*w = lcdstruct.osd_w;
*h = lcdstruct.osd_h;
*rotate = lcdstruct.osd_scan_mode;
}
static void get_video_w_h(uint16_t *video_w, uint16_t *video_h)
{
*video_w = lcdstruct.video_w;
*video_h = lcdstruct.video_h;
}
// 返回屏幕的size和旋转角度
static void get_screen_w_h(uint16_t *screen_w, uint16_t *screen_h, uint8_t *video_rotate)
{
*screen_w = lcdstruct.screen_w;
*screen_h = lcdstruct.screen_h;
*video_rotate = lcdstruct.scan_mode;
}
// 注意,这部分不同屏以及硬件设计不一样,需要修改
void lcd_hardware_init(uint16_t *w, uint16_t *h, uint8_t *rotate, uint16_t *screen_w, uint16_t *screen_h, uint16_t *video_w, uint16_t *video_h, uint8_t *video_rotate)
{
if (lcdstruct.lcd_bus_type == LCD_BUS_I80)
{
if (lcdstruct.color_mode == LCD_MODE_666)
{
lcd_hardware_init666();
}
else if (lcdstruct.color_mode == LCD_MODE_565)
{
lcd_hardware_init565();
}
else
{
lcd_hardware_init565();
}
}
else if ((lcdstruct.lcd_bus_type == LCD_BUS_RGB) || (lcdstruct.lcd_bus_type == LCD_BUS_SPI4))
{
lcd_hardware_init565();
}
else if (lcdstruct.lcd_bus_type == LCD_BUS_MIPI)
{
lcd_hardware_init565();
}
// 返回osd的w和h
get_osd_w_h(w, h, rotate);
get_screen_w_h(screen_w, screen_h, video_rotate);
get_video_w_h(video_w, video_h);
}
// 主要硬件初始化,但由于存在rgb屏,还是会有部分寄存器需要配置
void lcd_hardware_init565()
{
uint8 pixel_dot_num = 1;
struct lcdc_device *lcd_dev;
struct spi_device *spi_dev;
// uint32_t rbuf[4];
// uint8_t *pt8;
lcd_dev = (struct lcdc_device *) dev_get(HG_LCDC_DEVID);
spi_dev = (struct spi_device *) dev_get(HG_SPI0_DEVID);
uint8_t rst = MACRO_PIN(PIN_LCD_RESET);
if (rst != 255)
{
gpio_iomap_output(rst, GPIO_IOMAP_OUTPUT);
gpio_set_val(rst, 0);
os_sleep_ms(100);
gpio_set_val(rst, 1);
os_sleep_ms(100);
}
if (lcdstruct.lcd_bus_type == LCD_BUS_RGB)
{
uint8 spi_buf[10];
if (lcdstruct.init_table != NULL)
{
spi_open(spi_dev, 1000000, SPI_MASTER_MODE, SPI_WIRE_SINGLE_MODE, SPI_CPOL_1_CPHA_1);
spi_ioctl(spi_dev, SPI_SET_FRAME_SIZE, 9, 0);
// lcd spi_cfg
_os_printf("read lcd id(%x)\r\n", (unsigned int) spi_dev);
lcd_register_read_3line(spi_dev, 0xda, spi_buf, 4);
_os_printf("***ID:%02x %02x %02x %02x\r\n", spi_buf[0], spi_buf[1], spi_buf[2], spi_buf[3]);
lcd_table_init(spi_dev, (uint8_t *) lcdstruct.init_table);
gpio_set_val(PIN_SPI0_CS, 1);
gpio_iomap_output(PIN_SPI0_CS, GPIO_IOMAP_OUTPUT);
}
}
// scale_to_lcd_config();
lcdc_init(lcd_dev);
if ((lcdstruct.lcd_bus_type == LCD_BUS_I80) || (lcdstruct.lcd_bus_type == LCD_BUS_SPI4))
{
lcdc_open(lcd_dev);
}
lcdc_set_color_mode(lcd_dev, lcdstruct.color_mode);
lcdc_set_bus_width(lcd_dev, lcdstruct.bus_width);
lcdc_set_interface(lcd_dev, lcdstruct.lcd_bus_type);
lcdc_set_colrarray(lcd_dev, lcdstruct.colrarray);
pixel_dot_num = lcdstruct.color_mode / lcdstruct.bus_width;
lcdc_set_lcd_vaild_size(lcd_dev, lcdstruct.screen_w + lcdstruct.hlw + lcdstruct.hbp + lcdstruct.hfp, lcdstruct.screen_h + lcdstruct.vlw + lcdstruct.vbp + lcdstruct.vfp, pixel_dot_num);
lcdc_set_lcd_visible_size(lcd_dev, lcdstruct.screen_w, lcdstruct.screen_h, pixel_dot_num);
if (lcdstruct.lcd_bus_type == LCD_BUS_I80)
{
lcdc_mcu_signal_config(lcd_dev, lcdstruct.signal_config.value);
}
else if ((lcdstruct.lcd_bus_type == LCD_BUS_RGB) || (lcdstruct.lcd_bus_type == LCD_BUS_MIPI) || (lcdstruct.lcd_bus_type == LCD_BUS_QSPI))
{
lcdc_signal_config(lcd_dev, lcdstruct.vs_en, lcdstruct.hs_en, lcdstruct.de_en, lcdstruct.vs_inv, lcdstruct.hs_inv, lcdstruct.de_inv, lcdstruct.pclk_inv);
lcdc_set_invalid_line(lcd_dev, lcdstruct.vlw);
lcdc_set_valid_dot(lcd_dev, lcdstruct.hlw + lcdstruct.hbp, lcdstruct.vlw + lcdstruct.vbp);
lcdc_set_hlw_vlw(lcd_dev, lcdstruct.hlw, 0);
}
lcdc_set_baudrate(lcd_dev, lcdstruct.pclk);
lcdc_set_bigendian(lcd_dev, 1);
if (lcdstruct.lcd_bus_type == LCD_BUS_I80)
{
// lcd_table_init_MCU(lcd_dev, lcdstruct.init_table);
lcd_reg_table_init(lcd_dev, lcdstruct.lcd_bus_type, (uint8_t *) (lcdstruct.init_table));
}
else if (lcdstruct.lcd_bus_type == LCD_BUS_MIPI)
{
mipi_dsi_init(lcdstruct.screen_w, lcdstruct.screen_h, lcdstruct.pclk, lcdstruct.vlw, lcdstruct.vbp, lcdstruct.vfp, lcdstruct.hlw, lcdstruct.hbp, lcdstruct.hfp, lcdstruct.lane_num,
lcdstruct.color_mode);
}
else if (lcdstruct.lcd_bus_type == LCD_BUS_SPI4)
{
lcdc_spi_cs_lock_time(lcd_dev, 0x20, 0x20, 0x20);
lcdc_cmd_auto_send(lcd_dev, 0, 0);
// pt8 = (uint8_t *)rbuf;
// pt8[0] = 1;
// pt8[1] = 4;
// pt8[2] = 0x04;
// lcdc_reg_read_data(lcd_dev,1,4,rbuf);
// os_printf("ID:%02x %02x %02x %02x %02x %02x %02x\r\n",pt8[0],pt8[1],pt8[2],pt8[3],pt8[4],pt8[5],pt8[6]);
lcd_reg_table_init(lcd_dev, lcdstruct.lcd_bus_type, (uint8_t *) (lcdstruct.init_table));
}
}
void lcd_hardware_init666()
{
uint8 pixel_dot_num = 1;
struct lcdc_device *lcd_dev;
struct spi_device *spi_dev;
lcd_dev = (struct lcdc_device *) dev_get(HG_LCDC_DEVID);
spi_dev = (struct spi_device *) dev_get(HG_SPI0_DEVID);
uint8_t rst = MACRO_PIN(PIN_LCD_RESET);
if (rst != 255)
{
gpio_iomap_output(rst, GPIO_IOMAP_OUTPUT);
gpio_set_val(rst, 0);
os_sleep_ms(100);
gpio_set_val(rst, 1);
os_sleep_ms(100);
}
if (lcdstruct.lcd_bus_type == LCD_BUS_RGB)
{
uint8 spi_buf[10];
if (lcdstruct.init_table != NULL)
{
spi_open(spi_dev, 1000000, SPI_MASTER_MODE, SPI_WIRE_SINGLE_MODE, SPI_CPOL_1_CPHA_1);
spi_ioctl(spi_dev, SPI_SET_FRAME_SIZE, 9, 0);
// lcd spi_cfg
_os_printf("read lcd id(%x)\r\n", (unsigned int) spi_dev);
lcd_register_read_3line(spi_dev, 0xda, spi_buf, 4);
_os_printf("***ID:%02x %02x %02x %02x\r\n", spi_buf[0], spi_buf[1], spi_buf[2], spi_buf[3]);
lcd_table_init(spi_dev, (uint8_t *) lcdstruct.init_table);
gpio_set_val(PIN_SPI0_CS, 1);
gpio_iomap_output(PIN_SPI0_CS, GPIO_IOMAP_OUTPUT);
}
}
// scale_to_lcd_config();
lcdc_init(lcd_dev);
if (lcdstruct.lcd_bus_type == LCD_BUS_I80)
{
lcdc_open(lcd_dev);
}
lcdc_set_color_mode(lcd_dev, lcdstruct.color_mode);
lcdc_set_bus_width(lcd_dev, lcdstruct.bus_width);
lcdc_set_interface(lcd_dev, lcdstruct.lcd_bus_type);
lcdc_set_colrarray(lcd_dev, lcdstruct.colrarray);
pixel_dot_num = lcdstruct.color_mode / lcdstruct.bus_width;
lcdc_set_lcd_vaild_size(lcd_dev, lcdstruct.screen_w + lcdstruct.hlw + lcdstruct.hbp + lcdstruct.hfp, lcdstruct.screen_h + lcdstruct.vlw + lcdstruct.vbp + lcdstruct.vfp, pixel_dot_num);
lcdc_set_lcd_visible_size(lcd_dev, lcdstruct.screen_w, lcdstruct.screen_h, 3);
if (lcdstruct.lcd_bus_type == LCD_BUS_I80)
{
lcdc_mcu_signal_config(lcd_dev, lcdstruct.signal_config.value);
}
else if (lcdstruct.lcd_bus_type == LCD_BUS_RGB)
{
lcdc_signal_config(lcd_dev, lcdstruct.vs_en, lcdstruct.hs_en, lcdstruct.de_en, lcdstruct.vs_inv, lcdstruct.hs_inv, lcdstruct.de_inv, lcdstruct.pclk_inv);
lcdc_set_invalid_line(lcd_dev, lcdstruct.vlw);
lcdc_set_valid_dot(lcd_dev, lcdstruct.hlw + lcdstruct.hbp, lcdstruct.vlw + lcdstruct.vbp);
lcdc_set_hlw_vlw(lcd_dev, lcdstruct.hlw, 0);
}
lcdc_set_baudrate(lcd_dev, lcdstruct.pclk);
lcdc_set_bigendian(lcd_dev, 1);
if (lcdstruct.lcd_bus_type == LCD_BUS_I80)
{
lcd_table_init_MCU(lcd_dev, lcdstruct.init_table);
}
// gamma表之类没有配置,这个考虑是放在其他地方,这个函数专注硬件的初始化好了
#if 0
lcdc_video_enable_gamma(lcd_dev, 1);
lcdc_video_enable_ccm(lcd_dev, 1);
lcdc_video_enable_constarast(lcd_dev, 1);
lcdc_video_set_CCM_COEF0(lcd_dev, 0x00df0100);
lcdc_video_set_CCM_COEF1(lcd_dev, 0x0003b3f3);
lcdc_video_set_CCM_COEF2(lcd_dev, 0x0df0000d);
lcdc_video_set_CCM_COEF3(lcd_dev, 0x00000000);
lcdc_video_set_constarast_val(lcd_dev, 0x12);
lcdc_video_set_gamma_R(lcd_dev, (uint32_t)rgb_gamma_table);
lcdc_video_set_gamma_G(lcd_dev, (uint32_t)rgb_gamma_table);
lcdc_video_set_gamma_B(lcd_dev, (uint32_t)rgb_gamma_table);
#endif
lcdc_set_bus_width(lcd_dev, LCD_BUS_WIDTH_6);
}
// lcd相关参数配置,w、h、rotate
void lcd_arg_setting(uint16_t w, uint16_t h, uint8_t rotate, uint16_t screen_w, uint16_t screen_h, uint16_t video_w, uint16_t video_h, uint8_t video_rotate)
{
struct app_lcd_s *lcd_s = &lcd_msg_s;
lcd_s->w = w;
lcd_s->h = h;
lcd_s->rotate = rotate;
lcd_s->screen_w = screen_w;
lcd_s->screen_h = screen_h;
lcd_s->video_w = video_w;
lcd_s->video_h = video_h;
lcd_s->video_rotate = video_rotate;
}
// 芯片lcd的驱动初始化
void lcd_driver_init(const char *osd_encode_name, const char *lcd_osd_name, const char *lcd_video_p0, const char *lcd_video_p1)
{
struct app_lcd_s *lcd_s = &lcd_msg_s;
struct dsi_device *dsi_dev;
dsi_dev = (struct dsi_device *) dev_get(HG_DSI_DEVID);
dev_put((struct dev_obj *) dsi_dev);
lcd_s->osd_enc_msi = osd_encode_msi_init(osd_encode_name);
// 对应的rb初始化
RB_INIT(&lcd_s->osd_rb, LCD_RB_COUNT);
RB_INIT(&lcd_s->p0_rb, LCD_RB_COUNT);
RB_INIT(&lcd_s->p1_rb, LCD_RB_COUNT);
RB_INIT(&lcd_s->p2_rb, LCD_RB_COUNT);
RB_INIT(&lcd_s->delete_rb, LCD_DELETE_RB_COUNT);
#if 1
lcd_s->lcd_osd_msi = lcd_osd_msi(lcd_osd_name);
lcd_s->video_p0_msi = lcd_video_msi_init(lcd_video_p0, FSTYPE_YUV_P0);
lcd_s->video_p1_msi = lcd_video_msi_init(lcd_video_p1, FSTYPE_YUV_P1);
lcd_s->csc_video_p2_msi = lcd_video_msi_init(R_CSC_VIDEO_P2, FSTYPE_YUV_P0);
#endif
lcd_s->hardware_ready = 1;
lcd_s->thread_exit = 0;
lcd_s->hardware_auto_ks = 0;
lcd_s->get_auto_ks = 0;
struct lcdc_device *lcd_dev;
lcd_dev = (struct lcdc_device *) dev_get(HG_LCDC_DEVID);
dev_put((struct dev_obj *) lcd_dev);
lcd_s->lcd_dev = lcd_dev;
lcd_s->lcd_dsi_dev = dsi_dev;
lcdc_set_video_size(lcd_dev, lcdstruct.video_w, lcdstruct.video_h);
lcdc_set_rotate_p0_up(lcd_dev, 0);
lcdc_set_rotate_p0p1_start_location(lcd_dev, 0, 0, 0, 0);
lcdc_set_rotate_linebuf_num(lcd_dev, LCD_ROTATE_LINE);
lcd_s->line_buf_num = LCD_ROTATE_LINE;
lcdc_set_video_data_from(lcd_dev, VIDEO_FROM_MEMORY_ROTATE);
lcdc_set_video_start_location(lcd_dev, lcdstruct.video_x, lcdstruct.video_y);
lcdc_set_video_en(lcd_dev, 0);
// 设置默认值,因为这个一定要配置,并且地址与p1的地址范围要一样(就是全部是psram或者全部是sram,所以这里最好都是设置psram)
lcdc_set_p0_rotate_y_src_addr(lcd_dev, (uint32) 0x28000000);
lcdc_set_p0_rotate_u_src_addr(lcd_dev, (uint32) 0x28000000);
lcdc_set_p0_rotate_v_src_addr(lcd_dev, (uint32) 0x28000000);
lcdc_set_osd_start_location(lcd_dev, lcdstruct.osd_x, lcdstruct.osd_y);
lcdc_set_osd_size(lcd_dev, lcdstruct.osd_w, lcdstruct.osd_h);
lcdc_set_osd_format(lcd_dev, OSD_RGB_565);
// 仅仅测试新框架
// lcdc_set_osd_dma_addr(lcd_dev,(uint32)osd565_encode_test);
lcdc_set_osd_alpha(lcd_dev, 0x100);
lcdc_set_osd_enc_cfg(lcd_dev, 0xFFFFFF, 0x000000);
lcdc_osd_spec_color_alpha(lcd_dev, 0, 0xffffff, 0x00);
lcdc_osd_enc_en(lcd_dev, 1);
lcdc_set_osd_en(lcd_dev, 0);
lcdc_osd_trans_en(lcd_dev, 1);
lcdc_video_enable_auto_ks(lcd_dev, 0);
lcdc_set_timeout_info(lcd_dev, 1, 3);
lcdc_request_irq(lcd_dev, LCD_DONE_IRQ, (lcdc_irq_hdl) &lcd_squralbuf_done1, (uint32) lcd_s);
#if LCD_SCREEN_RECORD_EN
uint8_t *video_psram_screen = (uint8_t *) av_psram_zalloc(SCALE_CONFIG_W * SCALE_HIGH + SCALE_CONFIG_W * SCALE_HIGH / 2);
os_printf("LCD_SCREEN_RECORD_EN psram addr:%x\n", video_psram_screen);
lcdc_screen_yuv_addr(lcd_dev, video_psram_screen, video_psram_screen + SCALE_CONFIG_W * SCALE_HIGH, video_psram_screen + SCALE_CONFIG_W * SCALE_HIGH + SCALE_CONFIG_W * SCALE_HIGH / 4);
lcdc_request_irq(lcd_dev, SCREEN_DONE_IRQ, (lcdc_irq_hdl) &lcd_screen_finish, (uint32) lcd_s);
#endif
// lcdc_request_irq(lcd_dev, OSD_EN_IRQ, (lcdc_irq_hdl)&lcd_osd_isr1_msi, (uint32)lcd_s);
lcdc_request_irq(lcd_dev, TIMEOUT_IRQ, (lcdc_irq_hdl) &lcd_timeout1, (uint32) lcd_s);
if (MACRO_PIN(LCD_TE) != 255)
{
lcdc_te_edge_cfg(lcd_dev, 1);
lcdc_request_irq(lcd_dev, LCD_TE_IRQ, (lcdc_irq_hdl) &lcd_te_isr1, (uint32) lcd_s);
}
lcdc_open(lcd_dev);
#if 0
//extern void lcd_thread(void *d);
//lcd_s->thread_hdl = os_task_create("lcd_thread", lcd_thread2, lcd_s, OS_TASK_PRIORITY_NORMAL, 0, NULL, 1024);
#else
extern int32 lcd_msi_work(struct os_work * work);
extern void lcd_msi_irq_callback(void *data);
lcd_s->app_lcd_cb = lcd_msi_irq_callback;
OS_WORK_INIT(&lcd_s->work, lcd_msi_work, 0);
os_run_work_delay(&lcd_s->work, 1);
#endif
}
void wait_lcd_exit()
{
struct app_lcd_s *lcd_s = &lcd_msg_s;
lcd_s->thread_exit = 1;
while (lcd_s->thread_hdl)
{
os_sleep_ms(1);
}
}
// 重复初始化,一般用于意外断电或者说休眠起来后使用
void lcd_driver_reinit()
{
#if 0
struct app_lcd_s *lcd_s = &lcd_msg_s;
lcd_s->hardware_ready = 1;
lcd_s->thread_exit = 0;
lcd_s->hardware_auto_ks = 0;
lcd_s->get_auto_ks = 0;
struct lcdc_device *lcd_dev;
lcd_dev = (struct lcdc_device *)dev_get(HG_LCDC_DEVID);
lcd_s->lcd_dev = lcd_dev;
lcdc_set_video_size(lcd_dev, lcdstruct.video_w, lcdstruct.video_h);
// VIDEO
lcdc_set_rotate_p0_up(lcd_dev, 0);
lcdc_set_rotate_p0p1_start_location(lcd_dev, 0, 0, 0, 0);
// line_buf后续再分配
lcdc_set_rotate_linebuf_num(lcd_dev, LCD_ROTATE_LINE);
lcdc_set_video_data_from(lcd_dev, VIDEO_FROM_MEMORY_ROTATE);
lcdc_set_video_start_location(lcd_dev, lcdstruct.video_x, lcdstruct.video_y);
lcdc_set_video_en(lcd_dev, 0);
// 设置默认值,因为这个一定要配置,并且地址与p1的地址范围要一样(就是全部是psram或者全部是sram,所以这里最好都是设置psram)
lcdc_set_p0_rotate_y_src_addr(lcd_dev, (uint32)0x38000000);
lcdc_set_p0_rotate_u_src_addr(lcd_dev, (uint32)0x38000000);
lcdc_set_p0_rotate_v_src_addr(lcd_dev, (uint32)0x38000000);
// OSD
lcdc_set_osd_start_location(lcd_dev, lcdstruct.osd_x, lcdstruct.osd_y);
lcdc_set_osd_size(lcd_dev, lcdstruct.osd_w, lcdstruct.osd_h);
lcdc_set_osd_format(lcd_dev, OSD_RGB_565);
lcdc_set_osd_alpha(lcd_dev, 0x100);
lcdc_set_osd_enc_head(lcd_dev, 0xFFFFFF, 0xFFFBFF);
lcdc_set_osd_enc_diap(lcd_dev, 0x000000, 0x000000);
lcdc_set_osd_en(lcd_dev, 0);
lcdc_video_enable_auto_ks(lcd_dev, 0);
lcdc_set_timeout_info(lcd_dev, 1, 3);
lcdc_request_irq(lcd_dev, LCD_DONE_IRQ, (lcdc_irq_hdl)&lcd_squralbuf_done1, (uint32)lcd_s);
lcdc_request_irq(lcd_dev, OSD_EN_IRQ, (lcdc_irq_hdl)&lcd_osd_isr1_msi, (uint32)lcd_s);
lcdc_request_irq(lcd_dev, TIMEOUT_IRQ, (lcdc_irq_hdl)&lcd_timeout1, (uint32)lcd_s);
if (MACRO_PIN(LCD_TE) != 255) {
lcdc_set_te_edge(lcd_dev, 1);
lcdc_request_irq(lcd_dev, LCD_TE_IRQ, (lcdc_irq_hdl)&lcd_te_isr1, (uint32)lcd_s);
}
lcdc_open(lcd_dev);
// lcdc_set_start_run(lcd_dev);
extern void lcd_thread(void *d);
lcd_s->thread_hdl = os_task_create("lcd_thread", lcd_thread, (void *)lcd_s, OS_TASK_PRIORITY_NORMAL, 0, NULL, 1024);
#endif
}
#if 0
void lcd_module_run2(){
uint32_t rbuf[4];
uint8_t *pt8;
uint8 pixel_dot_num = 1;
uint32_t *osd_sram_fifo;
struct lcdc_device *lcd_dev;
struct spi_device *spi_dev;
struct scale_device *scale_dev;
struct vpp_device *vpp_dev;
struct jpg_device *jpg_dev;
jpg_dev = (struct jpg_device *)dev_get(HG_JPG1_DEVID);
vpp_dev = (struct vpp_device *)dev_get(HG_VPP_DEVID);
scale_dev = (struct scale_device *)dev_get(HG_SCALE2_DEVID);
lcd_dev = (struct lcdc_device *)dev_get(HG_LCDC_DEVID);
spi_dev = (struct spi_device * )dev_get(HG_SPI0_DEVID);
lcdc_set_video_size(lcd_dev,lcdstruct.video_w,lcdstruct.video_h);
lcdc_set_osd_start_location(lcd_dev,lcdstruct.osd_x,lcdstruct.osd_y);
lcdc_set_osd_size(lcd_dev,lcdstruct.osd_w,lcdstruct.osd_h);
lcdc_set_osd_dma_addr(lcd_dev,(uint32)osd565_encode_test);
lcdc_set_osd_format(lcd_dev,OSD_RGB_565);
lcdc_set_osd_alpha(lcd_dev,0x100);
lcdc_set_osd_enc_cfg(lcd_dev,0xFFFFFF,0x000000);
lcdc_osd_spec_color_alpha(lcd_dev,0,0xffffff,0x00);
lcdc_osd_enc_en(lcd_dev,1);
lcdc_set_osd_en(lcd_dev,1);
lcdc_osd_trans_en(lcd_dev,1);
if((lcdstruct.lcd_bus_type == LCD_BUS_RGB)||(lcdstruct.lcd_bus_type == LCD_BUS_MIPI)||(lcdstruct.lcd_bus_type == LCD_BUS_QSPI)){
lcdc_clock_alway_on(lcd_dev,1);
}
lcdc_rot_burst_dw16(lcd_dev,0);
lcdc_video_enable_auto_ks(lcd_dev,0);
lcdc_set_timeout_info(lcd_dev,1,3);
lcdc_request_irq(lcd_dev,LCD_DONE_IRQ,(lcdc_irq_hdl )&lcd_squralbuf_done1,(uint32)lcd_dev);
lcdc_open(lcd_dev);
os_sleep_ms(10);
lcdc_set_start_run(lcd_dev);
}
#endif
#endif
Reference in New Issue View Git Blame Copy Permalink