#ifndef _HGTIMER_V4_HW_H #define _HGTIMER_V4_HW_H #ifdef __cplusplus extern "C" { #endif /***** TIMERx CON Register *****/ /*! Timer IR selection whether lsb first send (for TIMER1/2 only) */ #define LL_TIMER_CON_IR_TMR_FST_LSB_SEL (1UL << 29) /*! Timer IR function logic 0 PWM polarity selection (for TIMER1/2 only) */ #define LL_TIMER_CON_IR_ZERO_PWMPOL (1UL << 28) /*! Timer IR function logic 1 PWM polarity selection (for TIMER1/2 only) */ #define LL_TIMER_CON_IR_ONE_PWMPOL (1UL << 27) /*! Timer IR function enable (for TIMER1/2 only) */ #define LL_TIMER_CON_IR_EN (1UL << 26) /*! PWM polarity selection in TIMER module */ #define LL_TIMER_CON_PWMPOL (1UL << 25) /*! The polarity of capture event 1 is selected: 0 = rising edge, 1 = falling edge. */ #define LL_TIMER_CON_CAP1POL(n) ((n & 0x1) << 21) /*! When the capture event 1 occurs, the value of the CNT is automatically cleared. */ #define LL_TIMER_CON_CTRRST1 (1UL << 17) /*! The number of the Capture register: * 00 : Capture data store in CAP1 * 01 : Capture data store in CAP1 CAP2 * 10 : Capture data store in CAP1 CAP2 CAP3 * 11 : Capture data store in CAP1 CAP2 CAP3 CAP4 */ #define LL_TIMER_CON_CAP_CNT(n) (((n)&0x3) << 15) /*! Capture selection: * 00 : GPIO * 01 : GPIO OR * 10 : compare0 output * 11 : compare1 output */ #define LL_TIMER_CON_CAP_SEL(n) (((n)&0x3) << 13) /*! Output sync signal selection: * 00 : CNT value = PRD value * 01 : CNT value = CMP value * 10 : Output SYNCI value to SYNCO * 11 : PWM output is assigned to SYNCO */ #define LL_TIMER_CON_SYNCO_SEL(n) (((n)&0x3) << 11) /*! Synci polarity inversion: * 1 : Invert * 0 : not reversed */ #define LL_TIMER_CON_SYNCI_POL (1UL << 10) /*! Synci function selection * 00 : disable * 01 : kick start * 10 : reset * 11 : gating */ #define LL_TIMER_CON_SLAVE_MODE(n) (((n)&0x3) << 8) /*! Timer prescaler settings: * 000 : 0 frequency division * 001 : 2 frequency division * 010 : 4 frequency division * 011 : 8 frequency division * 100 : 16 frequency division * 101 : 32 frequency division * 110 : 64 frequency division * 111 : 128 frequency division */ #define LL_TIMER_CON_PSC(n) (((n)&0x7) << 5) /*! Timer counter source select bits: * 001 : Internal high speed RC * 010 : Internal low speed RC * 011 : External crystal oscillator divided by 2 clocks * 100 : timer inc pin rising * 101 : timer inc pin falling * 110 : timer inc pin rising and falling * Others : system clock */ #define LL_TIMER_CON_INC_SRC_SEL(n) (((n)&0x7) << 2) /*! Timer mode select bits: * 00 : timer counter mode * 01 : timer pwm mode * 10 : timer capture mode * Others : reservation */ #define LL_TIMER_CON_MODE_SEL(n) (((n)&0x3) << 0) /***** TIMERx EN Register *****/ /*! TMR enable signal, active high. */ #define LL_TIMER_EN_TMREN (1UL << 0) /***** TIMERx IE Register *****/ /*! Timer IR TX word done interrupt enable (for TIMER1/2 only) */ #define LL_TIMER_IE_IR_TX_WORD_DONE_IE (1UL << 11) /*! Timer IR TX done interrupt enable (for TIMER1/2 only) */ #define LL_TIMER_IE_IR_TX_DONE_IE (1UL << 10) /*! Dma buffer full interrupt enable. */ #define LL_TIMER_IE_DMA_FL_IE (1UL << 9) /*! Dma buffer half full interrupt enable. */ #define LL_TIMER_IE_DMA_HF_IE (1UL << 8) /*! The slave mode trigger mode or reset mode interrupt enable. */ #define LL_TIMER_IE_SLAVE_IE (1UL << 7) /*! When the CNT value is equal to the CMP value, the interrupt is enabled and is valid only in pwm mode. */ #define LL_TIMER_IE_CMP_IE (1UL << 6) /*! When the CNT value is equal to the PRD value, the interrupt is enabled and is valid only in the counter mode/PWM mode. */ #define LL_TIMER_IE_PRD_IE (1UL << 5) /*! When the CNT value overflows (16'hffff), the interrupt is enabled. */ #define LL_TIMER_IE_OVF_IE (1UL << 4) /*! When the capture event 1 occurs, the interrupt is enabled. @note: none this capture event interrupt */ #define LL_TIMER_IE_CAP1_IE (1UL << 0) /***** TIMERx CNT Register *****/ /*! Count register. */ #define LL_TIMER_CNT(n) (((n)&0xFFFFFFFF) << 0) /***** TIMERx FLG Register *****/ /*! Timer IR TX word done interrupt flag (for TIMER1/2 only) */ #define LL_TIMER_IE_IR_TX_WORD_DONE_FLG (1UL << 11) /*! Timer IR TX done interrupt flag (for TIMER1/2 only) */ #define LL_TIMER_IE_IR_TX_DONE_FLG (1UL << 10) /*! Dma buffer full sign. */ #define LL_TIMER_IE_DMA_FL_FLG (1UL << 9) /*! Dma buffer half full sign. */ #define LL_TIMER_IE_DMA_HF_FLG (1UL << 8) /*! The slave mode flag (reset or trigger only). */ #define LL_TIMER_IE_SLAVE_FLG (1UL << 7) /*! The CNT value is equal to the CMP value flag and is valid only in pwm mode. */ #define LL_TIMER_IE_CMP_FLG (1UL << 6) /*! The CNT value is equal to the PRD value flag and is valid only in counter mode/PWM mode. */ #define LL_TIMER_IE_PRD_FLG (1UL << 5) /*! CNT value overflow (16'hffff) flag. */ #define LL_TIMER_IE_OVF_FLG (1UL << 4) /*! Capture event 1 occurs. */ #define LL_TIMER_IE_CAP1_FLG (1UL << 0) /***** TIMERx CLR Register *****/ /*! Timer IR TX word done interrupt clear (for TIMER1/2 only) */ #define LL_TIMER_IE_IR_TX_WORD_DONE_CLR (1UL << 11) /*! Timer IR TX done interrupt clear (for TIMER1/2 only) */ #define LL_TIMER_IE_IR_TX_DONE_CLR (1UL << 10) /*! Dma buffer full sign clear. */ #define LL_TIMER_IE_DMA_FL_CLR (1UL << 9) /*! Dma buffer half full sign clear. */ #define LL_TIMER_IE_DMA_HF_CLR (1UL << 8) /*! The slave mode flag (reset or trigger only) clear. */ #define LL_TIMER_IE_SLAVE_CLR (1UL << 7) /*! The CNT value is equal to the CMP value flag clear. */ #define LL_TIMER_IE_CMP_CLR (1UL << 6) /*! The CNT value is equal to the PRD value flag clear. */ #define LL_TIMER_IE_PRD_CLR (1UL << 5) /*! The CNT value overflow (16'hffff) flag is cleared. */ #define LL_TIMER_IE_OVF_CLR (1UL << 4) /*! Capture event 1 occurs flag clear. */ #define LL_TIMER_IE_CAP1_CLR (1UL << 0) /***** TIMERx CAP1/PR Register *****/ /*! Capture mode : capture register 1 * Timing mode/PWM mode: Count period register */ #define LL_TIMER_CMP1_PR(n) (((n)&0xFFFFFFFF) << 0) /***** TIMERx CAP2/CMP Register *****/ /*! Capture mode : capture register 2 * Timing mode/PWM mode: compare register */ #define LL_TIMER_CMP2_CMP(n) (((n)&0xFFFFFFFF) << 0) /***** TIMERx CAP3/PR_SD Register *****/ /*! Capture mode : capture register 3 * Timing mode/PWM mode: counting period shadow register */ #define LL_TIMER_CMP3_PR_SD(n) (((n)&0xFFFFFFFF) << 0) /***** TIMERx CAP4/CMP_SD Register *****/ /*! Capture mode : capture register 4 * Timing mode/PWM mode: Compare shadow registers */ #define LL_TIMER_CMP4_CMP_SD(n) (((n)&0xFFFFFFFF) << 0) /***** TIMERx DCCTL Register *****/ /*! Dma mode selection * 0 : Single mode, after the specified dma length is completed, disable TMR. * 1 : Loop mode, after the dma length is specified, restart from the start address. */ #define LL_TIMER_DMA_LPBK (1UL << 1) /*! Dma enabled. */ #define LL_TIMER_DMA_EN (1UL << 0) /***** TIMERx DADR Register *****/ /*! Dma starting address. */ #define LL_TIMER_DADR_STADR(n) (((n)&0xFFFF) << 0) /***** TIMERx DLEN Register *****/ /*! Dma buffer length (32bit), if the buffer is n, the configuration is n-1; */ #define LL_TIMER_DLEN_LEN(n) (((n)&0xFFFF) << 0) /***** TIMERx DCNT Register *****/ /*! The number of dma data is valid. */ #define LL_TIMER_DCNT_CNT(n) (((n)&0xFFFF) << 0) /***** TIMER ALLCON Register *****/ /*! The timer3 sync count value is cleared. */ #define LL_TIMER_ALLCON_TMR3_SYNC (1UL << 11) /*! The timer2 sync count value is cleared. */ #define LL_TIMER_ALLCON_TMR2_SYNC (1UL << 10) /*! The timer1 sync count value is cleared. */ #define LL_TIMER_ALLCON_TMR1_SYNC (1UL << 9) /*! The timer0 sync count value is cleared. */ #define LL_TIMER_ALLCON_TMR0_SYNC (1UL << 8) /*! Timer3 starts counting. */ #define LL_TIMER_ALLCON_TMR3_KICK (1UL << 3) /*! Timer2 starts counting. */ #define LL_TIMER_ALLCON_TMR2_KICK (1UL << 2) /*! Timer1 starts counting. */ #define LL_TIMER_ALLCON_TMR1_KICK (1UL << 1) /*! Timer0 starts counting. */ #define LL_TIMER_ALLCON_TMR0_KICK (1UL << 0) /*! Configure the trigger path for the sync count of TIMER. */ #define LL_TIMER_ALLCON_SYNC_COUNT_ALL(n) (((n)&0x3F) << 8) /*! Configure the synchronous trigger path of TIMER. */ #define LL_TIMER_ALLCON_KICK_ALL(n) (((n)&0x3F) << 0) struct hgtimer_v4_hw { __IO uint32_t TMR_CON; __IO uint32_t TMR_EN; __IO uint32_t TMR_IE; __IO uint32_t TMR_CNT; __IO uint32_t TMR_FLG; __IO uint32_t TMR_CLR; __IO uint32_t TMR_CAP1; __IO uint32_t TMR_CAP2; __IO uint32_t TMR_CAP3; __IO uint32_t TMR_CAP4; /* The following registers only for timer1 & timer2 */ __IO uint32_t TMR_DCTL; __IO uint32_t TMR_DADR; __IO uint32_t TMR_DLEN; __IO uint32_t TMR_DCNT; __IO uint32_t TMR_IR_BCNT; }; #ifdef __cplusplus } #endif #endif /* _HGTIMER_V4_HW_H */