Initial commit: TXW82x FPV v2.7.0.7-42229 SDK + project sources
This commit is contained in:
187
sdk/include/lib/lcd/lcd.h
Normal file
187
sdk/include/lib/lcd/lcd.h
Normal file
@@ -0,0 +1,187 @@
|
||||
#ifndef LIB_LCD_H
|
||||
#define LIB_LCD_H
|
||||
#include "typesdef.h"
|
||||
#include "dev.h"
|
||||
#include "hal/lcdc.h"
|
||||
#include "hal/scale.h"
|
||||
|
||||
#define LCD_ROTATE 1
|
||||
#define SCALE_DIRECT_TO_LCD 0
|
||||
#define LCD_FROM_DEC 0
|
||||
#define LCD_SET_ROTATE_180 0
|
||||
#define LCD_THREE_BUF 0
|
||||
#define LCD_FROM_DMA2D_BUF 1
|
||||
#define LCD_33_WVGA 1
|
||||
|
||||
#if LCD_33_WVGA
|
||||
#define SCALE_WIDTH 800//800//800//854//848//640
|
||||
#define SCALE_HIGH 480//480//480//480//480//
|
||||
#else
|
||||
#define SCALE_WIDTH 480//400//162//320
|
||||
#define SCALE_HIGH 320//400//132//240
|
||||
#endif
|
||||
|
||||
#define PHOTO1_W 320
|
||||
#define PHOTO1_H 240
|
||||
|
||||
|
||||
|
||||
#define SCALE_CONFIG_W ((SCALE_WIDTH+3)/4)*4
|
||||
#define SCALE_PHOTO1_CONFIG_W ((PHOTO1_W+3)/4)*4
|
||||
#define SCALE_CONFIG_H ((SCALE_HIGH+7)/8)*8
|
||||
|
||||
#if LCD_SET_ROTATE_180
|
||||
#define Y_OFFSET SCALE_CONFIG_W*(SCALE_HIGH-1)
|
||||
#define UV_OFFSET ((SCALE_CONFIG_W/2+3)/4)*4 * (SCALE_HIGH/2-1)
|
||||
|
||||
#define DEC_Y_OFFSET PHOTO1_W*(PHOTO1_H-1)//428*(240-1)
|
||||
#define DEC_UV_OFFSET ((SCALE_PHOTO1_CONFIG_W/2+3)/4)*4 * (PHOTO1_H/2-1) //160*119//216*(119)
|
||||
|
||||
#else
|
||||
#define Y_OFFSET 0
|
||||
#define UV_OFFSET 0
|
||||
|
||||
#define DEC_Y_OFFSET 0
|
||||
#define DEC_UV_OFFSET 0
|
||||
|
||||
#endif
|
||||
|
||||
extern uint32 p1_w,p1_h;
|
||||
extern uint32 scale_p1_w;
|
||||
extern uint32 dec_y_offset,dec_uv_offset;
|
||||
|
||||
|
||||
#define SRAMBUF_WLEN 64
|
||||
|
||||
|
||||
|
||||
|
||||
enum init_tab_token_e {
|
||||
LCD_CMD,
|
||||
LCD_DAT,
|
||||
SPI_DAT,
|
||||
DELAY_MS,
|
||||
LCD_TAB_END = 0XFFUL,
|
||||
};
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t osd_buf_to_lcd;
|
||||
uint8_t osd_buf_to_updata;
|
||||
uint8_t updata_finish;
|
||||
uint8_t lcd_run_new_lcd;
|
||||
uint8_t lcd_p0p1_state; //0:p0p1 disable 1:p0 enable p1 disable 2: p0 disable p1 enable 3: p0p1 enable
|
||||
uint8_t lcd_p0p1_cur;
|
||||
uint8_t lcd_p1_size_reset;
|
||||
uint8_t lcd_osd_mode;
|
||||
uint8_t lcd_osd_cur_mode;
|
||||
}lcd_msg;
|
||||
|
||||
|
||||
typedef struct _lcd_desc_s {
|
||||
char name[32];
|
||||
uint8 lcd_bus_type;
|
||||
uint8 bus_width;
|
||||
uint8 bus_cmd;
|
||||
uint8 color_mode;
|
||||
//uint8 red_width;
|
||||
//uint8 green_width;
|
||||
//uint8 blue_width;
|
||||
uint8 osd_scan_mode; //osd是否旋转,给到lvgl
|
||||
uint8 scan_mode;
|
||||
//only mcu-bus use
|
||||
//-1,te disable.
|
||||
//0,te just interrupt,no kick TX.用户(写APP的人)自己编写TE中断服务函数,自己控制kick tx.
|
||||
//1,te interrupt and auto kick TX,中断被内部使用,用户不应该操作TE中断
|
||||
uint8 te_mode;
|
||||
|
||||
uint8 lane_num;
|
||||
//for mcu data-bus, cs_setup and cs_hold eq 0 default,so freq(wr) = src_clk/div/2.
|
||||
//for rgb bus,freq(pclk) = src_clk/div;
|
||||
uint32 pclk;
|
||||
|
||||
//the 'lcd_data_mode' eq LCDDMOD
|
||||
uint32 lcd_data_mode;
|
||||
uint32 lcd_data_mode1;
|
||||
uint32 colrarray;
|
||||
uint16 screen_w,video_x,video_w;
|
||||
uint16 screen_h,video_y,video_h;
|
||||
|
||||
uint16 osd_x,osd_y,osd_w,osd_h;
|
||||
|
||||
uint8 (* init_table)[2];
|
||||
uint8 * frame_table;
|
||||
|
||||
|
||||
uint8 clk_per_pixel;
|
||||
uint8 even_order;
|
||||
uint8 odd_order;
|
||||
//------rgb-bus----------
|
||||
uint8 pclk_inv;
|
||||
//unit:line,real vfp=vfp+1(line)
|
||||
uint8 vlw,vbp,vfp;
|
||||
//unit:pclk
|
||||
uint8 hlw;
|
||||
//unit:pixel,real hfp=.hfp(pixel) + 1(pclk)
|
||||
uint8 hbp,hfp;
|
||||
|
||||
uint8 de_en;
|
||||
uint8 hs_en;
|
||||
uint8 vs_en;
|
||||
uint8 de_inv;//de默认是高电平有效,如果de_inv是1，则将其反转,0xff:disable
|
||||
uint8 hs_inv;//hs_inv同de_inv
|
||||
uint8 vs_inv;//vs_inv同de_inv
|
||||
union
|
||||
{
|
||||
uint8_t value;
|
||||
struct
|
||||
{
|
||||
uint8_t rd_inv: 1;
|
||||
uint8_t cs_inv: 1;
|
||||
uint8_t dc_inv: 1;
|
||||
uint8_t wr_inv: 1;
|
||||
uint8_t resev: 4;
|
||||
}mcu;
|
||||
}signal_config;
|
||||
|
||||
uint8 spi_cpol; //CPOL = 0,CLK is "Low" when inactive
|
||||
uint8 spi_cpha; //CPHA = 0,sample edge is first edge
|
||||
uint8 spi_order;//ORDER = 0,MSB
|
||||
uint8 spi_bits; //number of data bits
|
||||
|
||||
uint32 contrast;
|
||||
|
||||
uint32 brightness;
|
||||
uint32 saturation;
|
||||
uint32 contra_index;
|
||||
|
||||
uint32 gamma_red;
|
||||
uint32 gamma_green;
|
||||
uint32 gamma_blue;
|
||||
|
||||
uint32 de_ccm[12];
|
||||
uint32 de_saj[5];
|
||||
}
|
||||
lcddev_t;
|
||||
|
||||
|
||||
|
||||
|
||||
extern lcddev_t lcdstruct;
|
||||
void scale_soft_run(uint8_t *softbuf,uint32_t w,uint32 h);
|
||||
void scale_to_lcd_config_soft(uint8_t *softbuf,uint32_t w,uint32_t h);
|
||||
void scale_from_vpp_to_jpg(struct scale_device *scale_dev,uint32 yuvbuf_addr,uint32 s_w,uint32 s_h,uint32 d_w,uint32 d_h);
|
||||
void scale_from_soft_to_jpg(struct scale_device *scale_dev,uint32 yuvbuf_addr,uint32 s_w,uint32 s_h,uint32 d_w,uint32 d_h);
|
||||
void set_lcd_photo1_config(uint32 w,uint32 h,uint8 rotate_180);
|
||||
void set_lcd_enlarge_config(uint32_t sw,uint32_t sh,uint32_t ow,uint32_t oh,uint8_t enlarge);
|
||||
void jpg_dec_scale_del();
|
||||
void jpg_decode_scale_config();
|
||||
void lcd_module_run();
|
||||
void lcd_user_frame(uint32 frame_addr);
|
||||
void jpg_decode_to_lcd(uint32 photo,uint32 jpg_w,uint32 jpg_h,uint32 video_w,uint32 video_h);
|
||||
int32 jpg_decode_is_finish();
|
||||
void mipi_dsi_init(uint32 w,uint32 h,uint32 dclk,uint8 vsa,uint8 vbp,uint8 vfp,uint8 hsa,uint8 hbp,uint8 hfp,uint8 lanenum,uint8 colortype);
|
||||
|
||||
|
||||
|
||||
#endif
|
||||
Reference in New Issue
Block a user