Initial commit: TXW82x FPV v2.7.0.7-42229 SDK + project sources

sdk/driver/spi/hgspi_v2_hw.h

@@ -0,0 +1,68 @@
+#ifndef _HGGPIO_V4_HW_H_
+#define _HGGPIO_V4_HW_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***** SPICON *****/
+/*! Interrupt flag clear, write 1 to clear, write 0 to have no effect
+ */
+#define LL_SIMPLE_SPI_CON_SPIINTCLR(n)             (((n)&0x01) << 10)
+/*! SPI interrupt flag
+ */
+#define LL_SIMPLE_SPI_CON_SPIINT(n)                (((n)&0x01) <<  9)
+/*! SPI status flag
+ */
+#define LL_SIMPLE_SPI_CON_SPIDONE(n)               (((n)&0x01) <<  8)
+/*! DMA enable flag
+ */
+#define LL_SIMPLE_SPI_CON_SPIDISYNCEN(n)           (((n)&0x01) <<  7)
+/*! Master or slave control bits
+ */
+#define LL_SIMPLE_SPI_CON_SPISM(n)                 (((n)&0x01) <<  6)
+/*! Send or receive control bits
+ */
+#define LL_SIMPLE_SPI_CON_SPIRXTX(n)               (((n)&0x01) <<  5)
+/*! 2-wire or 3-wire mode selection
+ */
+#define LL_SIMPLE_SPI_CON_SPI2W3W(n)               (((n)&0x01) <<  4)
+/*! SPI interrupt enable bit
+ */
+#define LL_SIMPLE_SPI_CON_SPIINTEN(n)              (((n)&0x01) <<  3)
+/*! Sampling mode selection bit
+ */
+#define LL_SIMPLE_SPI_CON_SPISMPSEL(n)             (((n)&0x01) <<  2)
+/*! Clock line idle state selection bit
+ */
+#define LL_SIMPLE_SPI_CON_SPIIDST(n)               (((n)&0x01) <<  1)
+/*! SPI enable bit
+ */
+#define LL_SIMPLE_SPI_CON_SPIEN(n)                 (((n)&0x01) <<  0)
+
+
+/*****SPIBAUD *****/
+/*! Baud rate setting
+ */
+#define LL_SIMPLE_SPI_SPIBAUD(n)                   (((n)&0x0000FFFF) << 0)
+
+
+/***** SPIDATA *****/
+/*! Data register
+ */
+#define LL_SIMPLE_SPI_SPIDATA(n)                   (((n)&0x000000FF) << 0)
+
+
+struct hgspi_v2_hw {
+    __IO uint32_t CON;
+    __IO uint32_t BAUD;
+    __IO uint32_t DATA;
+};
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _HGGPIO_V4_HW_H_ */
+