Initial commit: TXW82x FPV v2.7.0.7-42229 SDK + project sources

sdk/app/walkie-talkie/walkie_talkie.h

@@ -0,0 +1,106 @@
+#ifndef _PHOTO_TRAN_PROTOCOL_
+#define _PHOTO_TRAN_PROTOCOL_
+#include "osal/string.h"
+
+typedef struct
+{     
+	uint32_t type;       //0:连接请求      1:开始图传      2:cfg
+	uint16_t w;
+	uint16_t h;
+	uint32_t packet_len;  //分包长度
+	uint32_t ip_grp;      //IP比例,如25，则表示1个I帧，24个P帧
+	uint32_t frame_rate;  //帧率
+	uint32_t dev_magic;   //设备特征码
+}connect_cfg_head;
+
+typedef struct
+{    
+	uint8_t  framenum;   //0~255,每帧+1
+	uint8_t  cnt;        //当前包需要分多少数据包      
+	uint8_t  pack;       //当前包num
+	uint8_t  frmtype;    //当前是I帧还是P帧
+}data_head;
+
+typedef struct
+{    
+	uint8_t  framenum;      //当前帧num
+	uint8_t  type;          //0:当前帧接收完整            1:请求屏/app发送状态msg              2:当前帧数据缺失
+}status_msg;
+
+typedef struct
+{    
+	uint32_t  time;             //发送完成的时间
+	uint32_t  dev_magic;		//设备特征码
+	uint8_t   framenum;         //当前帧num
+	uint8_t   status;           //0:wait client status   1:sending status to client    2:get client status   3:frame lost
+	uint8_t   timeout;          //超时多久后发送状态请求
+	uint8_t   lost_num;         //当前获取状态后，丢包情况
+	uint8_t   lost_packet[100]; //如果有丢包，分别是哪些包
+	
+}frame_msg;
+
+typedef struct
+{
+	uint8_t *addr;
+	uint32_t len;
+	uint32_t timeinf;
+	uint16_t num;
+	uint16_t type;
+	uint16_t devid;
+	uint16_t framerate;
+	uint16_t w;
+	uint16_t h;
+}decode_msg;
+
+typedef struct
+{
+	uint32_t ipaddr;
+	uint32_t tcpfd;
+	uint32_t udp_status_fd;
+	uint32_t udp_data_fd;
+	uint32_t udp_status_task;
+	void*  udp_read_status_ev;
+	uint32_t udp_data_task;
+	uint32_t dev_id;
+	uint32_t frame_rate;
+	uint8_t *psram_photo;
+	uint16_t w;
+	uint16_t h;	
+}dev_map;
+
+typedef struct
+{
+	int32_t tx_data;
+	int32_t rx_data;
+	uint8_t  speed;
+	uint8_t  frame_tx_lost;
+	uint8_t  frame_tx_success;
+	uint8_t  frame_rx_lost;
+	uint8_t  frame_rx_success;	
+	uint8_t  mcs;
+	uint8_t  frmtype;
+	uint8_t  have_init;
+    uint8_t  run_state;
+    uint8_t  run_task;
+	struct os_mutex run_state_mutex;
+}walkie_msg;
+
+#ifdef SYS_APP_WALKIE_TALKIE
+extern walkie_msg walkmsg;
+extern uint8_t   apsta_mode;
+void user_protocol_task_decrease(void);
+void user_protocol_task_increase(void);
+void user_protocol2(uint16_t status_port,uint16_t data_port);
+void user_protocol2_deinit(void);
+void user_protocol3(uint16_t status_port,uint16_t data_port);
+void user_protocol3_deinit(void);
+void user_protocol_deinit(void);
+void user_protocol_reinit(void);
+#endif
+
+#define OPEN_DBG       0
+#define MODEFORDEV  0    //0:AP   1:STA
+#define NET_W       320
+#define NET_H       240
+ 
+#endif