zhongxuanzhen/433_STM32
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

3.24_433_TX版本：项目去UI化，删除OLED/菜单/按键，TX已验证，RX待验证

Browse Source 
删除内容：
- 删除OLED显示相关代码（u8g2库、I2C接口）
- 删除按键输入相关代码（key.c）
- 删除菜单系统（MultMenu整个目录）
- 删除USB CDC功能（USB_DEVICE目录）
- 删除旧的E32演示代码（e32_demo.c/h）
保留内容：
- Driver_RF433核心驱动（已封装完整）
- rf433_tx_app.c（TX应用层，独立无UI依赖）
- rf433_rx_app.c（RX应用层，独立无UI依赖）
- GPIO LED指示功能（LED_TX/LED_RX）
This commit is contained in:
zhongxuanzhen
2026-03-24 19:39:43 +08:00
parent e439dd465e
commit 1c6ff020e9
225 changed files with 2446 additions and 94426 deletions
Download Patch File Download Diff File Expand all files Collapse all files

139
Core/Inc/e32_demo.h
View File

@ -1,139 +0,0 @@
#ifndef _E32_DEMO_H_
#define _E32_DEMO_H_
#include "e32_hal.h"
typedef enum
{
OFF = 0x00,
ON = 0x01,
}on_off_t;
typedef enum
{
RADIO_RATE_2400 = 0x02,
RADIO_RATE_4800 = 0x03,
RADIO_RATE_9600 = 0x04,
RADIO_RATE_19200 = 0x05,
RADIO_RATE_38400 = 0x06,
RADIO_RATE_62500 = 0x07,
}radio_rate_t;
typedef enum
{
UART_8N1 = 0x00,
UART_8O1 = 0x01,
UART_8E1 = 0x02,
}uart_parity_t;
typedef enum
{
UART_RATE_1200 = 0x00,
UART_RATE_2400 = 0x01,
UART_RATE_4800 = 0x02,
UART_RATE_9600 = 0x03,
UART_RATE_19200 = 0x04 ,
UART_RATE_38400 = 0x05,
UART_RATE_57600 = 0x06,
UART_RATE_115200= 0x07,
}uart_rate_t;
typedef enum
{
WOR_PERIOD_250MS = 0x00,
WOR_PERIOD_500MS = 0x01,
WOR_PERIOD_750MS = 0x02,
WOR_PERIOD_1000MS = 0x03,
WOR_PERIOD_1250MS = 0x04,
WOR_PERIOD_1500MS = 0x05,
WOR_PERIOD_1750MS = 0x06,
WOR_PERIOD_2000MS = 0x07,
}wor_period_t;
typedef enum
{
TX_POWER_DBM_30 = 0x00,
TX_POWER_DBM_27 = 0x01,
TX_POWER_DBM_24 = 0x02,
TX_POWER_DBM_21 = 0x03,
}transmit_power_t;
typedef struct
{
/* 00H<30>ǹ̶<C7B9><CCB6><EFBFBD>HEAD<41><44><EFBFBD>޷<EFBFBD><DEB7><EFBFBD><EFBFBD><EFBFBD> */
/* ======== <20>û<EFBFBD><C3BB><EFBFBD><EFBFBD>üĴ<C3BC><C4B4><EFBFBD> 01H ======== */
struct
{
uint8_t address_h; /* ģ<><C4A3><EFBFBD><EFBFBD>ַ (<28>û<EFBFBD><C3BB><EFBFBD><EFBFBD>üĴ<C3BC><C4B4><EFBFBD><EFBFBD><EFBFBD>ַ: 01H<31><48>02H) <20><>ͬ<EFBFBD><CDAC>ַ<EFBFBD><D6B7>ģ<EFBFBD><C4A3><EFBFBD>޷<EFBFBD>ֱ<EFBFBD>ӻ<EFBFBD>ͨ<EFBFBD><CDA8><EFBFBD><EFBFBD>(<28>㲥<EFBFBD><E3B2A5>ַ<EFBFBD><D6B7><EFBFBD><EFBFBD>); 65535Ϊ<35>㲥<EFBFBD><E3B2A5>ַ<EFBFBD><D6B7><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ⱥ<EFBFBD><C8BA><EFBFBD><EFBFBD>Ϣ */
}register_1;
/* ======== <20>û<EFBFBD><C3BB><EFBFBD><EFBFBD>üĴ<C3BC><C4B4><EFBFBD> 02H ======== */
struct
{
uint8_t address_l;
}register_2;
/* ======== <20>û<EFBFBD><C3BB><EFBFBD><EFBFBD>üĴ<C3BC><C4B4><EFBFBD> 03H ======== */
union {
uint8_t value;
struct
{
radio_rate_t radio_rate : 3; /* <20><><EFBFBD>߿<EFBFBD><DFBF><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> (<28>Ĵ<EFBFBD><C4B4><EFBFBD><EFBFBD><EFBFBD>ַ: 03H Bit2-0) <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Խ<EFBFBD>ߣ<EFBFBD><DFA3><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Խ<EFBFBD>죬<EFBFBD><ECA3AC><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ȼ<EFBFBD><C8BB>½<EFBFBD><C2BD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϊͨ<CEAA>ž<EFBFBD><C5BE><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>*/
uart_rate_t uart_baud_rate : 3; /* <20><><EFBFBD>ڲ<EFBFBD><DAB2><EFBFBD><EFBFBD><EFBFBD> (<28>Ĵ<EFBFBD><C4B4><EFBFBD><EFBFBD><EFBFBD>ַ: 03H Bit7-5) <20><><EFBFBD><EFBFBD>ģʽ(ģʽ2)ǿ<>ƹ̶<C6B9><CCB6><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϊ9600<30><30><EFBFBD><EFBFBD><EFBFBD>ഫ<EFBFBD><E0B4AB>ģʽʱΪ<CAB1>û<EFBFBD><C3BB><EFBFBD><EFBFBD>ô<EFBFBD><C3B4>ڲ<EFBFBD><DAB2><EFBFBD><EFBFBD><EFBFBD> */
uart_parity_t uart_parity : 2; /* <20><><EFBFBD><EFBFBD>У<EFBFBD><D0A3><EFBFBD><EFBFBD><EFBFBD><EFBFBD> (<28>Ĵ<EFBFBD><C4B4><EFBFBD><EFBFBD><EFBFBD>ַ: 03H Bit4-3) */
}field;
}register_3;
/* ======== <20>û<EFBFBD><C3BB><EFBFBD><EFBFBD>üĴ<C3BC><C4B4><EFBFBD> 04H ======== */
struct
{
uint8_t channel; /* <20>ŵ<EFBFBD><C5B5><EFBFBD><EFBFBD><EFBFBD> (<28>Ĵ<EFBFBD><C4B4><EFBFBD><EFBFBD><EFBFBD>ַ: 04H) <20><><EFBFBD><EFBFBD><EFBFBD>ز<EFBFBD>Ƶ<EFBFBD><C6B5><EFBFBD><EFBFBD>Ƶ<EFBFBD><C6B5><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>йأ<D0B9><D8A3>ز<EFBFBD>Ƶ<EFBFBD><C6B5> = <20>ŵ<EFBFBD>0<EFBFBD><30>ʼƵ<CABC><C6B5> + (1MHz x <20>ŵ<EFBFBD><C5B5><EFBFBD><EFBFBD><EFBFBD>) */
}register_4;
/* ======== <20>û<EFBFBD><C3BB><EFBFBD><EFBFBD>üĴ<C3BC><C4B4><EFBFBD> 05H ======== */
union {
uint8_t value;
struct
{
transmit_power_t tx_power : 2; /* <20><><EFBFBD>书<EFBFBD><E4B9A6> (<28>Ĵ<EFBFBD><C4B4><EFBFBD><EFBFBD><EFBFBD>ַ: 05H Bit1-0) <20><>ͬ<EFBFBD><CDAC><EFBFBD><EFBFBD>ģ<EFBFBD><C4A3><EFBFBD>Ĺ<EFBFBD><C4B9>ʷֵ<CAB7><D6B5><EFBFBD>һ<EFBFBD>£<EFBFBD><C2A3><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ֵ<EFBFBD><D6B5>Ҫ<EFBFBD>ο<EFBFBD>ģ<EFBFBD><C4A3><EFBFBD>ֲ<EFBFBD> */
on_off_t packet_fec : 1; /* ǰ<><C7B0><EFBFBD><EFBFBD><EFBFBD><EFBFBD>FEC (<28>Ĵ<EFBFBD><C4B4><EFBFBD><EFBFBD><EFBFBD>ַ: 05H Bit2 ) ˫<><CBAB>˫<EFBFBD>˱<EFBFBD><CBB1><EFBFBD>һ<EFBFBD>£<EFBFBD><C2A3><EFBFBD><EFBFBD><EFBFBD><EFBFBD>޷<EFBFBD>ͨ<EFBFBD>š<EFBFBD><C5A1><EFBFBD><EFBFBD><EFBFBD><EFBFBD>󣬾<EFBFBD><F3A3ACBE><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ǿ(<28><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>)<29><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʱ<EFBFBD><CAB1>Ҳ<EFBFBD><D2B2><EFBFBD>ӳ<EFBFBD> */
wor_period_t wake_on_radio_period : 3; /* <20><><EFBFBD>л<EFBFBD><D0BB><EFBFBD>WOR<4F><52><EFBFBD><EFBFBD> (<28>Ĵ<EFBFBD><C4B4><EFBFBD><EFBFBD><EFBFBD>ַ: 05H Bit2-0) <20>շ<EFBFBD>˫<EFBFBD><CBAB><EFBFBD>趨<EFBFBD><E8B6A8><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>һ<EFBFBD><D2BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>׳<EFBFBD><D7B3><EFBFBD><EFBFBD>޷<EFBFBD><DEB7><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> */
on_off_t reserve : 1; /* <20><><EFBFBD><EFBFBD> IO<49><4F><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʽ*/
on_off_t specify_target : 1; /* ָ<><D6B8>Ŀ<EFBFBD>괫<EFBFBD>䣬Ҳ<E4A3AC>ж<EFBFBD><D0B6><EFBFBD>ģʽ (<28>Ĵ<EFBFBD><C4B4><EFBFBD><EFBFBD><EFBFBD>ַ: 05H Bit7 ) <20><><EFBFBD>û<EFBFBD><C3BB><EFBFBD><EFBFBD>ڴ<EFBFBD><DAB4><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ݵ<EFBFBD>ǰ<EFBFBD><C7B0><EFBFBD>ֽ<EFBFBD><D6BD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ı<EFBFBD><C4B1><EFBFBD>ַ<EFBFBD><D6B7><EFBFBD>ŵ<EFBFBD> */
}field;
}register_5;
}e32_register_t;
typedef enum
{
REQUEST_CMD_CONFIG = 0x00,
REQUEST_CMD_NAME ,
REQUEST_CMD_VERSION ,
}request_cmd_t;
typedef struct
{
uint8_t address_h;
uint8_t address_l;
uint8_t channel;
uint8_t data[237];//<2F><><EFBFBD>㴫<EFBFBD><E3B4AB>(ָ<><D6B8>Ŀ<EFBFBD><C4BF>)<29><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ݲ<EFBFBD><DDB2>ó<EFBFBD><C3B3><EFBFBD>237<33>ֽڣ<D6BD><DAA3><EFBFBD><EFBFBD>򳬳<EFBFBD><F2B3ACB3><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ݻᶪʧ
}e32_specify_target_buffer_t;
typedef struct
{
uint8_t command;
uint8_t config[20];
}e32_hex_cmd_buffer_t;
typedef union
{
uint8_t opt_buffer[1024];
e32_hex_cmd_buffer_t hex_cmd;
e32_specify_target_buffer_t target;
}e32_opt_buffer_t;
#endif

21
Core/Inc/e32_hal.h
View File

@ -1,21 +0,0 @@
#ifndef _E32_HAL_H_
#define _E32_HAL_H_
#define E32_USE_GPIO_AUX 1 // 0:<3A><>ʹ<EFBFBD>û򲻼<C3BB><F2B2BBBC><EFBFBD>AUX״̬<D7B4><CCAC><EFBFBD><EFBFBD> 1:<3A><><EFBFBD><EFBFBD>ʹ<EFBFBD><CAB9>AUX<55><58><EFBFBD><EFBFBD>
#include <stdint.h>
typedef enum
{
WORK_MODE_TRANSPARENT = 0x00,
WORK_MODE_WAKE_ON_RADIO_MASTER = 0x01,
WORK_MODE_WAKE_ON_RADIO_SLAVE = 0x02,
WORK_MODE_CONFIG_AND_SLEEP = 0x03,
}work_mode_t;
void e32_hal_uart_tx( uint8_t *buffer , uint16_t length );
void e32_hal_aux_wait(void);
void e32_hal_reset(void);
void e32_hal_work_mode( work_mode_t mode);
#endif

31
Core/Inc/fifo.h
View File

@ -1,31 +0,0 @@
#ifndef _FIFO_H_
#define _FIFO_H_
#include <stdint.h>
typedef enum
{
FIFO_OK = 0x00,
FIFO_ERROR_NULL,
FIFO_ERROR_LENGTH,
FIFO_ERROR_FULL,
FIFO_ERROR_EMPTY,
}fifo_error_t;
typedef struct
{
uint32_t in;
uint32_t out;
uint32_t size;
uint8_t* buffer;
} fifo_t;
fifo_error_t fifo_create( fifo_t *fifo , uint8_t *buffer, uint32_t size );
fifo_error_t fifo_clear( fifo_t *fifo );
fifo_error_t fifo_write( fifo_t *fifo, uint8_t *buffer, uint32_t length );
fifo_error_t fifo_read( fifo_t *fifo, uint8_t *buffer, uint32_t length );
fifo_error_t fifo_get_length( fifo_t *fifo , uint32_t *length);
fifo_error_t fifo_get_remain_length( fifo_t *fifo , uint32_t *length);
#endif

52
Core/Inc/i2c.h
View File

@ -1,52 +0,0 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file i2c.h
* @brief This file contains all the function prototypes for
* the i2c.c file
******************************************************************************
* @attention
*
* Copyright (c) 2024 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __I2C_H__
#define __I2C_H__
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "main.h"
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
extern I2C_HandleTypeDef hi2c2;
/* USER CODE BEGIN Private defines */
/* USER CODE END Private defines */
void MX_I2C2_Init(void);
/* USER CODE BEGIN Prototypes */
/* USER CODE END Prototypes */
#ifdef __cplusplus
}
#endif
#endif /* __I2C_H__ */

38
Core/Inc/main.h
View File

@ -33,19 +33,10 @@ extern "C" {
/* USER CODE BEGIN Includes */
#include <stdbool.h>
#include <stdio.h>
#include "application.h"
/* USER CODE END Includes */
/* Exported types ------------------------------------------------------------*/
/* USER CODE BEGIN ET */
extern uint8_t my_usb_rx_data[ ];
extern uint16_t my_usb_rx_num ;
typedef enum
{
KEY_NAME_UP = 0,
KEY_NAME_DOWN ,
KEY_NAME_ENTER,
}key_name_t;
/* USER CODE END ET */
/* Exported constants --------------------------------------------------------*/
@ -76,50 +67,21 @@ void Error_Handler(void);
#define AUX_GPIO_Port GPIOB
#define LED_TX_Pin GPIO_PIN_15
#define LED_TX_GPIO_Port GPIOA
#define BUZZER_PWM_Pin GPIO_PIN_3
#define BUZZER_PWM_GPIO_Port GPIOB
#define KEY_UP_Pin GPIO_PIN_4
#define KEY_UP_GPIO_Port GPIOB
#define USB_CTRL_Pin GPIO_PIN_5
#define USB_CTRL_GPIO_Port GPIOB
#define LED_RX_Pin GPIO_PIN_6
#define LED_RX_GPIO_Port GPIOB
#define KEY_ENTER_Pin GPIO_PIN_7
#define KEY_ENTER_GPIO_Port GPIOB
#define KEY_DOWN_Pin GPIO_PIN_9
#define KEY_DOWN_GPIO_Port GPIOB
/* USER CODE BEGIN Private defines */
void usb_printf(const char *format, ...);
void gpio_usb_ctrl_on(void);
void gpio_usb_ctrl_off(void);
void gpio_led_tx_on(void);
void gpio_led_tx_off(void);
void gpio_led_rx_on(void);
void gpio_led_rx_off(void);
void buzzer_on(void);
void buzzer_off(void);
void buzzer_button_press(void);
bool key_check_press( key_name_t name );
void key_set_continue( key_name_t name , bool enable );
void key_timer_1ms_interrupt_callback(void);
void systick_interrupt_1ms_callback(void);
void systick_set_user_timeout( uint32_t time_ms );
uint32_t systick_get_user_timeout(void);
void uart1_reconfig( uint32_t rate );
void uart1_rx_timeout_1ms_callback(void);
void uart1_wait_response_blocked( uint8_t * buffer, uint16_t *length );
bool uart1_check_rx_done( uint8_t *buffer , uint32_t *length );
void e32_demo_read_device_name( char *buffer , uint8_t *length );
void e32_demo_read_fireware_version( char *buffer , uint8_t *length);
void e32_demo_menu_config( menu_config_t *config );
void e32_demo_transmit( uint8_t *buffer , uint16_t length );
/* USER CODE END Private defines */
#ifdef __cplusplus

17
Core/Inc/u8g2_hal.h
View File

@ -1,17 +0,0 @@
/*
* @Author: JFeng 2834294740@qq.com
* @Date: 2023-06-30 12:08:24
* @LastEditors: JFeng 2834294740@qq.com
* @LastEditTime: 2023-07-14 20:12:55
* @FilePath: \MY_GUI\HARDWARE\stm32_u8g2.h
* @Description: 这是默认设置,请设置`customMade`, 打开koroFileHeader查看配置 进行设置: https://github.com/OBKoro1/koro1FileHeader/wiki/%E9%85%8D%E7%BD%AE
*/
#ifndef __STM32_U8G2_H
#define __STM32_U8G2_H
#include "main.h"
#include "u8g2.h"
void u8g2Init(u8g2_t *u8g2);
#endif

8
Core/Inc/usart.h
View File

@ -29,13 +29,6 @@ extern "C" {
#include "main.h"
/* USER CODE BEGIN Includes */
typedef enum {
FUNC_NONE = 0,
FUNC_FEATURE1,
FUNC_FEATURE2
} uart_feature;
extern uart_feature current_feature;
/* USER CODE END Includes */
extern UART_HandleTypeDef huart1;
@ -47,7 +40,6 @@ extern UART_HandleTypeDef huart1;
void MX_USART1_UART_Init(void);
/* USER CODE BEGIN Prototypes */
void usb_receive_to_tx_send( void );
/* USER CODE END Prototypes */
#ifdef __cplusplus

292
Core/Src/e32_demo.c
View File

@ -1,292 +0,0 @@
#include "e32_demo.h"
#include "main.h"
#include "application.h"
#include <string.h>
/**
* ģ<><C4A3><EFBFBD><EFBFBD><EFBFBD>ݲ<EFBFBD><DDB2><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
*/
static e32_opt_buffer_t e32_buffer;
/**
* ģ<><C4A3><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ȡָ<C8A1><D6B8>
*/
static const uint8_t request_config[3]={0xC1,0xC1,0xC1};
/**
* ATָ<54><D6B8> <20><>ȡ<EFBFBD>豸<EFBFBD><E8B1B8>
*/
static const char request_name[]="AT+DEVTYPE=?";
/**
* ATָ<54><D6B8> <20><>ȡ<EFBFBD>̼<EFBFBD><CCBC>汾
*/
static const char request_version[]="AT+FWCODE=?";
/**
* E32-433T30S Ĭ<><C4AC><EFBFBD><EFBFBD><EFBFBD>ò<EFBFBD><C3B2><EFBFBD>
*/
static const e32_register_t register_default =
{
.register_1 = {
.address_h = 0x00,
},
.register_2 = {
.address_l = 0x00,
},
.register_3.field = {
.radio_rate = RADIO_RATE_2400,
.uart_baud_rate = UART_RATE_9600,
.uart_parity = UART_8N1,
},
.register_4 = {
.channel = 0x17,
},
.register_5.field = {
.tx_power = TX_POWER_DBM_30,
.packet_fec = ON,
.wake_on_radio_period = WOR_PERIOD_250MS,
.reserve = OFF,
.specify_target = OFF,
},
};
/**
* @brief <20><>ģ<EFBFBD><C4A3>д<EFBFBD><D0B4><EFBFBD><EFBFBD><EFBFBD>ò<EFBFBD><C3B2><EFBFBD>ָ<EFBFBD><D6B8>
*
* @param config <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϣ
*/
static void e32_send_config_command( const e32_register_t *config )
{
/* <20><>1<EFBFBD>ֽڣ<D6BD><DAA3><EFBFBD><EFBFBD><EFBFBD>ָ<EFBFBD><D6B8>
C0<43><30><EFBFBD><EFBFBD>д<EFBFBD><D0B4><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> */
e32_buffer.hex_cmd.command = 0xC0;
/* <20><>2~6<>ֽڿ<D6BD>ʼ<EFBFBD><CABC><EFBFBD><EFBFBD><EFBFBD>û<EFBFBD><C3BB><EFBFBD><EFBFBD>ò<EFBFBD><C3B2><EFBFBD><EFBFBD><EFBFBD> */
memcpy( e32_buffer.hex_cmd.config , (uint8_t*)config , sizeof(e32_register_t));
/* <20><><EFBFBD><EFBFBD>д<EFBFBD><D0B4> */
e32_hal_uart_tx( (uint8_t*)&e32_buffer, sizeof(e32_register_t) + 1);
}
/**
* @brief <20><>ģ<EFBFBD><C4A3>д<EFBFBD><D0B4><EFBFBD><EFBFBD>ѯָ<D1AF><D6B8>
*
* @param cmd <20><>ѯ<EFBFBD><D1AF><EFBFBD><EFBFBD>
*/
static void e32_send_request_command( request_cmd_t cmd )
{
switch( cmd )
{
/* <20><>ȡ<EFBFBD><C8A1><EFBFBD>ò<EFBFBD><C3B2><EFBFBD> */
case REQUEST_CMD_CONFIG:
e32_hal_uart_tx( (uint8_t*)request_config, sizeof(request_config));
break;
/* <20><>ȡ<EFBFBD>豸<EFBFBD><E8B1B8><EFBFBD><EFBFBD> */
case REQUEST_CMD_NAME:
e32_hal_uart_tx( (uint8_t*)request_name, strlen(request_name));
break;
/* <20><>ȡ<EFBFBD>̼<EFBFBD><CCBC>汾 */
case REQUEST_CMD_VERSION:
e32_hal_uart_tx( (uint8_t*)request_version, strlen(request_version));
break;
}
}
/**
* @brief (<28><>ѯָ<D1AF><D6B8><EFBFBD><EFBFBD>)ģ<><C4A3>Ӧ<EFBFBD><D3A6><EFBFBD><EFBFBD><EFBFBD>ݼ<EFBFBD><DDBC><EFBFBD>
*
* @param cmd <20><>ѯ<EFBFBD><D1AF><EFBFBD><EFBFBD>
* @param buffer ָ<><D6B8>Ӧ<EFBFBD><D3A6><EFBFBD><EFBFBD><EFBFBD>ݻ<EFBFBD><DDBB><EFBFBD>
* @param length Ӧ<><D3A6><EFBFBD><EFBFBD><EFBFBD>ݳ<EFBFBD><DDB3><EFBFBD>
* @return bool <20><>ȷ<EFBFBD><C8B7><EFBFBD><EFBFBD>true; <20><><EFBFBD>򷵻<EFBFBD>false<73><65>
*/
static bool e32_response_command_check( request_cmd_t cmd , uint8_t *buffer , uint8_t length )
{
bool ret = false;
switch( cmd )
{
/* <20><>ȡ<EFBFBD><C8A1><EFBFBD>ò<EFBFBD><C3B2><EFBFBD> */
case REQUEST_CMD_CONFIG:
/* <20><><EFBFBD>ȼ<EFBFBD><C8BC><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>6<EFBFBD>ֽ<EFBFBD>*/
if( length == 6 )
{
/* <20><><EFBFBD>ݼ<EFBFBD><DDBC><EFBFBD> ֡ͷ<D6A1><CDB7><EFBFBD><EFBFBD>Ϊ0xC1 */
if( buffer[0] == 0xC1)
{
ret = true;
}
}
break;
/* <20><>ȡ<EFBFBD>豸<EFBFBD><E8B1B8><EFBFBD><EFBFBD> */
case REQUEST_CMD_NAME:
/* <20><><EFBFBD>ݼ<EFBFBD><DDBC><EFBFBD> */
if( strncmp( "DEVTYPE=", (char*)buffer, 8) == 0 )
{
ret = true;
}
break;
/* <20><>ȡ<EFBFBD>̼<EFBFBD><CCBC>汾 */
case REQUEST_CMD_VERSION:
/* <20><><EFBFBD>ݼ<EFBFBD><DDBC><EFBFBD> */
if( strncmp( "FWCODE=", (char*)buffer, 7) == 0 )
{
ret = true;
}
break;
}
return ret;
}
/**
* @brief <20><>ģ<EFBFBD>鴮<EFBFBD><E9B4AE>д<EFBFBD><D0B4><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
*
* @note <20><>ע<EFBFBD><D7A2>ģ<EFBFBD>鹤<EFBFBD><E9B9A4>ģʽ
* @param buffer ָ<><D6B8><EFBFBD><EFBFBD><EFBFBD>ݻ<EFBFBD><DDBB><EFBFBD>
* @param length д<>볤<EFBFBD><EBB3A4>
*/
void e32_demo_transmit( uint8_t *buffer , uint16_t length )
{
/* <20><><EFBFBD><EFBFBD>д<EFBFBD><D0B4> */
e32_hal_uart_tx( buffer, length);
}
/**
* @brief (<28><>ѡ) ʾ<><CABE><EFBFBD><EFBFBD><EFBFBD>ζ<EFBFBD>ȡ<EFBFBD>豸<EFBFBD><E8B1B8><EFBFBD><EFBFBD>
*
* @note ģ<><C4A3>Ӧ<EFBFBD><D3A6><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ģʽ
* @param buffer ģ<><C4A3>Ӧ<EFBFBD><D3A6><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
* @param length ģ<><C4A3>Ӧ<EFBFBD>𳤶<EFBFBD>
*/
void e32_demo_read_device_name( char *buffer , uint8_t *length )
{
uint16_t opt_length;
/* <20><><EFBFBD><EFBFBD>ģʽ<C4A3><CABD>֧<EFBFBD>ִ<EFBFBD><D6B4><EFBFBD>9600<30><30><EFBFBD><EFBFBD><EFBFBD><EFBFBD> */
uart1_reconfig(9600);
/* <20>л<EFBFBD><D0BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ģʽ */
e32_hal_work_mode( WORK_MODE_CONFIG_AND_SLEEP );
/* <20><><EFBFBD>Ͳ<EFBFBD>ѯָ<D1AF><D6B8> <20><>ȡ<EFBFBD>豸<EFBFBD><E8B1B8> */
e32_send_request_command( REQUEST_CMD_NAME );
/* <20>ȴ<EFBFBD>ģ<EFBFBD><C4A3>Ӧ<EFBFBD><D3A6> */
uart1_wait_response_blocked( (uint8_t*)buffer , &opt_length );
/* Ӧ<><D3A6><EFBFBD><EFBFBD><EFBFBD>ݼ<EFBFBD><DDBC><EFBFBD> */
if( e32_response_command_check( REQUEST_CMD_NAME, (uint8_t*)buffer , opt_length ) != true )
{
/* Ӧ<><D3A6><EFBFBD><EFBFBD><EFBFBD>ݲ<EFBFBD><DDB2><EFBFBD>ȷ */
while(1);
}
*length = opt_length;
}
/**
* @brief (<28><>ѡ) ʾ<><CABE><EFBFBD><EFBFBD><EFBFBD>ζ<EFBFBD>ȡ<EFBFBD>豸<EFBFBD>̼<EFBFBD><CCBC>汾
*
* @note ģ<><C4A3>Ӧ<EFBFBD><D3A6><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ģʽ
* @param buffer ģ<><C4A3>Ӧ<EFBFBD><D3A6><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
* @param length ģ<><C4A3>Ӧ<EFBFBD>𳤶<EFBFBD>
*/
void e32_demo_read_fireware_version( char *buffer , uint8_t *length )
{
uint16_t opt_length;
/* <20><><EFBFBD><EFBFBD>ģʽ<C4A3><CABD>֧<EFBFBD>ִ<EFBFBD><D6B4><EFBFBD>9600<30><30><EFBFBD><EFBFBD><EFBFBD><EFBFBD> */
uart1_reconfig(9600);
/* <20>л<EFBFBD><D0BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ģʽ */
e32_hal_work_mode( WORK_MODE_CONFIG_AND_SLEEP );
/* <20><><EFBFBD>Ͳ<EFBFBD>ѯָ<D1AF><D6B8> <20><>ȡ<EFBFBD>豸<EFBFBD><E8B1B8> */
e32_send_request_command( REQUEST_CMD_VERSION );
/* <20>ȴ<EFBFBD>ģ<EFBFBD><C4A3>Ӧ<EFBFBD><D3A6> */
uart1_wait_response_blocked( (uint8_t*)buffer , &opt_length );
/* Ӧ<><D3A6><EFBFBD><EFBFBD><EFBFBD>ݼ<EFBFBD><DDBC><EFBFBD> */
if( e32_response_command_check( REQUEST_CMD_VERSION, (uint8_t*)buffer , opt_length ) != true )
{
/* Ӧ<><D3A6><EFBFBD><EFBFBD><EFBFBD>ݲ<EFBFBD><DDB2><EFBFBD>ȷ */
while(1);
}
*length = opt_length;
}
/**
* @brief ʹ<><CAB9><EFBFBD><EFBFBD>ʾ<EFBFBD>˵<EFBFBD><CBB5>û<EFBFBD><C3BB><EFBFBD><EFBFBD>ò<EFBFBD><C3B2><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ģ<EFBFBD><C4A3>
*
* @param config <20>˵<EFBFBD><CBB5><EFBFBD><EFBFBD>ò<EFBFBD><C3B2><EFBFBD><EFBFBD><EFBFBD>Ϣ
*/
void e32_demo_menu_config( menu_config_t *config )
{
uint16_t opt_length;
e32_register_t register_write;
transmit_power_t power_select;
/* <20><><EFBFBD><EFBFBD>Ĭ<EFBFBD>ϼĴ<CFBC><C4B4><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> */
memcpy( (uint8_t*)&register_write , (uint8_t*)&register_default , sizeof(e32_register_t) );
/* <20><><EFBFBD><EFBFBD>ת<EFBFBD><D7AA> */
switch( config->tx_power )
{
case 27:
power_select = TX_POWER_DBM_27;
break;
case 24:
power_select = TX_POWER_DBM_24;
break;
case 21:
power_select = TX_POWER_DBM_21;
break;
default:
power_select = TX_POWER_DBM_30;
break;
}
/* <20>޸<EFBFBD><DEB8>û<EFBFBD><C3BB><EFBFBD><EFBFBD>õIJ<C3B5><C4B2><EFBFBD> */
register_write.register_5.field.tx_power = power_select; //<2F><><EFBFBD><EFBFBD>
register_write.register_3.field.radio_rate = (radio_rate_t)config->rate_mode; //<2F><><EFBFBD><EFBFBD>
register_write.register_4.channel = config->channel; //<2F>ŵ<EFBFBD>
/* <20><><EFBFBD><EFBFBD>ģʽ<C4A3><CABD>֧<EFBFBD>ִ<EFBFBD><D6B4><EFBFBD>9600<30><30><EFBFBD><EFBFBD><EFBFBD><EFBFBD> */
uart1_reconfig(9600);
/* <20>л<EFBFBD><D0BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ģʽ */
e32_hal_work_mode( WORK_MODE_CONFIG_AND_SLEEP );
/* <20><>ģ<EFBFBD>鴮<EFBFBD><E9B4AE>д<EFBFBD><D0B4><EFBFBD><EFBFBD><EFBFBD><EFBFBD> */
e32_send_config_command( &register_write );
/* <20>ȴ<EFBFBD>ģ<EFBFBD><C4A3>Ӧ<EFBFBD><D3A6> */
uart1_wait_response_blocked( e32_buffer.opt_buffer , &opt_length );
// /* Ӧ<><D3A6><EFBFBD><EFBFBD><EFBFBD>ݼ<EFBFBD><DDBC><EFBFBD> ָ<><D6B8>ͷ<EFBFBD><CDB7>ΪC1 */
// if( e32_buffer.opt_buffer[0] != 0xC1 )
// {
// /* ģ<><C4A3><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ش<EFBFBD>FF FF FF <20><>ʾָ<CABE><D6B8><EFBFBD><EFBFBD><EFBFBD><EFBFBD> */
// while(1);
// }
///@todo <20><><EFBFBD><EFBFBD><EFBFBD>ϴ<EFBFBD><CFB4>ڲ<EFBFBD><DAB2><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>޸<EFBFBD>
/* <20>л<EFBFBD><D0BB><EFBFBD><EFBFBD>û<EFBFBD><C3BB><EFBFBD><EFBFBD>õ<EFBFBD>͸<EFBFBD><CDB8>ģʽ<C4A3><CABD><EFBFBD>ڲ<EFBFBD><DAB2><EFBFBD><EFBFBD><EFBFBD> */
uart1_reconfig(9600);
/* <20>ص<EFBFBD>͸<EFBFBD><CDB8><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ģʽ */
e32_hal_work_mode( WORK_MODE_TRANSPARENT );
}

123
Core/Src/e32_hal.c
View File

@ -1,123 +0,0 @@
#include "e32_hal.h"
/**
* <20>뵥Ƭ<EBB5A5><C6AC>ƽ̨<C6BD>й<EFBFBD>
*/
#include "main.h"
#include "gpio.h"
#include "usart.h"
/**
* @brief <20><><EFBFBD>ڷ<EFBFBD><DAB7>ͽӿ<CDBD>
*
* @param buffer <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
* @param length <20><><EFBFBD>ͳ<EFBFBD><CDB3><EFBFBD>
*/
void e32_hal_uart_tx( uint8_t *buffer , uint16_t length )
{
HAL_UART_Transmit( &huart1, buffer, length, 0xFFFF);
}
/**
* @brief ģ<><C4A3>æ״̬<D7B4>ȴ<EFBFBD>
*/
void e32_hal_aux_wait(void)
{
if( HAL_GPIO_ReadPin( AUX_GPIO_Port , AUX_Pin ) == GPIO_PIN_RESET )
{
/* <20>ȵ<EFBFBD>ģ<EFBFBD><C4A3><EFBFBD><EFBFBD><EFBFBD><EFBFBD> AUX<55><58><EFBFBD>ŵ<EFBFBD>Ϊæ<CEAA><C3A6><EFBFBD><EFBFBD>Ϊ<EFBFBD><CEAA><EFBFBD><EFBFBD> */
while( HAL_GPIO_ReadPin( AUX_GPIO_Port , AUX_Pin ) == GPIO_PIN_RESET )
{
///@todo <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʱ<EFBFBD>߼<EFBFBD>
}
/* <20><><EFBFBD>Ǽ<EFBFBD><C7BC><EFBFBD><EFBFBD>ԣ<EFBFBD>AUX<55><58><EFBFBD>к<EFBFBD><D0BA><EFBFBD><EFBFBD>Ե<EFBFBD>1~2ms */
HAL_Delay(2);
}
}
/**
* @brief ģ<>鸴λ
*/
void e32_hal_reset(void)
{
HAL_GPIO_WritePin( RESET_GPIO_Port, RESET_Pin, GPIO_PIN_RESET );
HAL_Delay(1);
HAL_GPIO_WritePin( RESET_GPIO_Port, RESET_Pin, GPIO_PIN_SET );
#if E32_USE_GPIO_AUX
/* ע<><D7A2> Ӳ<><D3B2><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʱ<EFBFBD><CAB1><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>AUX<55><58><EFBFBD><EFBFBD><EFBFBD>͵<EFBFBD>ƽ<EFBFBD><C6BD><EFBFBD><EFBFBD>Ҫ<EFBFBD>ȴ<EFBFBD>һ<EFBFBD><D2BB>ʱ<EFBFBD><CAB1><EFBFBD>ٿ<EFBFBD>ʼAUX<55><58><EFBFBD><EFBFBD> */
HAL_Delay(10);
e32_hal_aux_wait();
#else
// /* E32-V2 (V8.1) <20>汾<EFBFBD><E6B1BE><EFBFBD><EFBFBD>ʱ<EFBFBD><CAB1><EFBFBD>ϳ<EFBFBD>
// <20><><EFBFBD><EFBFBD>ͨ<EFBFBD><CDA8>AT+FWCODE=?<3F><>ȡ<EFBFBD>汾<EFBFBD><E6B1BE>Ϣ<EFBFBD><CFA2><EFBFBD><EFBFBD>ȷ<EFBFBD><C8B7> 7393-x-xx */
// e32_delay_ms(1200);
/* E32-V2 (V8.2) <20>汾
<20><><EFBFBD><EFBFBD>ͨ<EFBFBD><CDA8>AT+FWCODE=?<3F><>ȡ<EFBFBD>汾<EFBFBD><E6B1BE>Ϣ<EFBFBD><CFA2><EFBFBD><EFBFBD>ȷ<EFBFBD><C8B7> 7459-x-xx */
e32_delay_ms(30);
#endif
}
/**
* @brief ģ<><C4A3>ģʽ<C4A3>л<EFBFBD>
*
* @param mode <20><><EFBFBD><EFBFBD>ģʽ
*/
void e32_hal_work_mode( work_mode_t mode)
{
#if E32_USE_GPIO_AUX
e32_hal_aux_wait();
#endif
switch(mode)
{
/* ģʽ0<CABD><30> һ<><D2BB>ģʽ (M0=0 M1=0) */
case WORK_MODE_TRANSPARENT:
HAL_GPIO_WritePin( M0_GPIO_Port, M0_Pin, GPIO_PIN_RESET );
HAL_GPIO_WritePin( M1_GPIO_Port, M1_Pin, GPIO_PIN_RESET );
break;
/* ģʽ1<CABD><31> <20><><EFBFBD><EFBFBD>ģʽ (M0=1 M1=0) */
case WORK_MODE_WAKE_ON_RADIO_MASTER:
HAL_GPIO_WritePin( M0_GPIO_Port, M0_Pin, GPIO_PIN_SET );
HAL_GPIO_WritePin( M1_GPIO_Port, M1_Pin, GPIO_PIN_RESET );
break;
/* ģʽ2<CABD><32> ʡ<><CAA1>ģʽ (M0=0 M1=1) */
case WORK_MODE_WAKE_ON_RADIO_SLAVE:
HAL_GPIO_WritePin( M0_GPIO_Port, M0_Pin, GPIO_PIN_RESET );
HAL_GPIO_WritePin( M1_GPIO_Port, M1_Pin, GPIO_PIN_SET );
break;
/* ģʽ3<CABD><33> <20><><EFBFBD><EFBFBD>ģʽ (M0=1 M1=1) */
case WORK_MODE_CONFIG_AND_SLEEP:
HAL_GPIO_WritePin( M0_GPIO_Port, M0_Pin, GPIO_PIN_SET );
HAL_GPIO_WritePin( M1_GPIO_Port, M1_Pin, GPIO_PIN_SET );
break;
default:
while(1); //ģʽ<C4A3><CABD><EFBFBD><EFBFBD>
}
#if E32_USE_GPIO_AUX
/* <20><><EFBFBD><EFBFBD><EFBFBD>л<EFBFBD><D0BB><EFBFBD> ģ<><C4A3><EFBFBD><EFBFBD>ʱAUX<55><58><EFBFBD>Ų<EFBFBD><C5B2><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>͵<EFBFBD>ƽ<EFBFBD><C6BD><EFBFBD><EFBFBD>Ҫ<EFBFBD>Ե<EFBFBD><D4B5>ٽ<EFBFBD><D9BD>м<EFBFBD><D0BC><EFBFBD> */
HAL_Delay(5);
e32_hal_aux_wait();
#else
/* <20><><EFBFBD>ﱣ<EFBFBD><EFB1A3>һ<EFBFBD><D2BB><EFBFBD><EFBFBD>ʱ<EFBFBD><CAB1>ȷ<EFBFBD><C8B7>ģʽ<C4A3>л<EFBFBD><D0BB><EFBFBD><EFBFBD><EFBFBD>ȷ<EFBFBD><C8B7><EFBFBD><EFBFBD> */
e32_delay_ms(50);
#endif
}

168
Core/Src/fifo.c
View File

@ -1,168 +0,0 @@
#include "fifo.h"
#define MIN(a, b) (((a) < (b)) ? (a) : (b))
fifo_error_t fifo_create( fifo_t *fifo , uint8_t *buffer, uint32_t size )
{
/* <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> */
if( (fifo == 0) || (buffer == 0) || (size == 0) )
{
return FIFO_ERROR_NULL;
}
/* <20><><EFBFBD>ȼ<EFBFBD><C8BC><EFBFBD> (<28><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>2^n) */
if( size & (size - 1) )
{
return FIFO_ERROR_LENGTH;
}
/* Ĭ<><C4AC> */
fifo->size = size;
fifo->buffer = buffer;
fifo->in = 0;
fifo->out = 0;
return FIFO_OK;
}
fifo_error_t fifo_clear( fifo_t *fifo )
{
/* <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> */
if( fifo == 0 )
{
return FIFO_ERROR_NULL;
}
fifo->in = 0;
fifo->out = 0;
return FIFO_OK;
}
fifo_error_t fifo_write( fifo_t *fifo, uint8_t *buffer, uint32_t length )
{
uint32_t i, j;
uint32_t end_length, org_length;
uint8_t *fifo_buffer;
/* <20><>¼ԭʼ<D4AD>û<EFBFBD>д<EFBFBD>볤<EFBFBD><EBB3A4> */
org_length = length;
/* <20><><EFBFBD><EFBFBD>FIFOʣ<4F><CAA3><EFBFBD><EFBFBD><EFBFBD><EFBFBD> */
length = MIN( length, fifo->size - fifo->in + fifo->out );
/* <20><><EFBFBD><EFBFBD>FIFO<46><4F><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ĩβ<C4A9>Ƿ<EFBFBD><C7B7><EFBFBD><EFBFBD><EFBFBD><EFBFBD>㹻λ<E3B9BB><CEBB> */
end_length = MIN( length, fifo->size - ( fifo->in & ( fifo->size - 1 ) ) );
/* <20>ҵ<EFBFBD>FIFO<46><4F>д<EFBFBD><D0B4><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʼ<EFBFBD><CABC>ַ */
fifo_buffer = fifo->buffer + ( fifo->in & ( fifo->size - 1 ) );
/* <20><><EFBFBD><EFBFBD>FIFOĩβ<C4A9><CEB2><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>û<EFBFBD><C3BB><EFBFBD><EFBFBD>ݸ<EFBFBD><DDB8>Ƶ<EFBFBD>FIFO<46><4F><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ĩβ */
for( i = 0; i < end_length; i++ )
{
*( fifo_buffer++ ) = *( buffer++ );
}
/* <20><><EFBFBD><EFBFBD><EFBFBD>û<EFBFBD><C3BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ƿ<EFBFBD><C7B7><EFBFBD>ȫ<EFBFBD><C8AB><EFBFBD><EFBFBD><EFBFBD><EFBFBD> */
j = length - end_length;
/* <20><><EFBFBD><EFBFBD><EFBFBD>û<EFBFBD><C3BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʣ<EFBFBD>࣬<EFBFBD><E0A3AC><EFBFBD><EFBFBD>Ҫ<EFBFBD><D2AA>FIFO<46><4F><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ͷ<EFBFBD><CDB7><EFBFBD><EFBFBD>ʼ<EFBFBD><CABC><EFBFBD><EFBFBD>*/
if ( j > 0 )
{
fifo_buffer = fifo->buffer;
for( i = 0; i < j; i++ )
{
*( fifo_buffer++ ) = *( buffer++ );
}
}
/* <20><>¼<EFBFBD>ѽ<EFBFBD><D1BD><EFBFBD>FIFO<46>ij<EFBFBD><C4B3><EFBFBD> */
fifo->in += length;
/* <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>FIFO<46><4F><EFBFBD>ݵij<DDB5><C4B3><EFBFBD>С<EFBFBD><D0A1><EFBFBD>û<EFBFBD>ʵ<EFBFBD><CAB5>д<EFBFBD><D0B4><EFBFBD><EFBFBD><EFBFBD>ݵij<DDB5><C4B3>ȣ<EFBFBD><C8A3>Ǿ<EFBFBD><C7BE><EFBFBD>FIFO<46><4F><EFBFBD><EFBFBD>װ<EFBFBD><D7B0><EFBFBD><EFBFBD><EFBFBD><EFBFBD> */
if( length < org_length )
{
return FIFO_ERROR_FULL;
}
return FIFO_OK;
}
fifo_error_t fifo_read( fifo_t *fifo, uint8_t *buffer, uint32_t length )
{
uint32_t i, j;
uint32_t end_length, org_length;
uint8_t *fifo_buffer;
/* <20><>¼ԭʼ<D4AD>û<EFBFBD><C3BB><EFBFBD>ȡ<EFBFBD><C8A1><EFBFBD><EFBFBD> */
org_length = length;
/* <20><><EFBFBD><EFBFBD>FIFO<46><4F><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ݳ<EFBFBD><DDB3><EFBFBD> */
length = MIN( length, fifo->in - fifo->out );
/* <20><><EFBFBD><EFBFBD>FIFOĩβ<C4A9><CEB2><EFBFBD>ӳ<EFBFBD><D3B3><EFBFBD> */
end_length = MIN( length, fifo->size - ( fifo->out & ( fifo->size - 1 ) ) );
/* <20>ҵ<EFBFBD>FIFOĩβ<C4A9><CEB2><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʼ<EFBFBD><CABC>ַ */
fifo_buffer = fifo->buffer + ( fifo->out & ( fifo->size - 1 ) );
/* <20><><EFBFBD><EFBFBD>FIFOĩβ<C4A9><CEB2><EFBFBD><EFBFBD><EFBFBD>ݳ<EFBFBD><DDB3>ӣ<EFBFBD><D3A3><EFBFBD><EFBFBD><EFBFBD>FIFO<46>ڸ<EFBFBD><DAB8>Ƹ<EFBFBD><C6B8>û<EFBFBD><C3BB><EFBFBD><EFBFBD>ݻ<EFBFBD><DDBB><EFBFBD> */
for( i = 0; i < end_length; i++ )
{
*( buffer++ ) = *( fifo_buffer++ );
}
/* <20><><EFBFBD><EFBFBD><EFBFBD>û<EFBFBD><C3BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ƿ<EFBFBD><C7B7><EFBFBD>ȫ<EFBFBD><C8AB><EFBFBD><EFBFBD><EFBFBD><EFBFBD> */
j = length - end_length;
/* <20><><EFBFBD><EFBFBD><EFBFBD>û<EFBFBD><C3BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʣ<EFBFBD>࣬<EFBFBD><E0A3AC><EFBFBD><EFBFBD>Ҫ<EFBFBD><D2AA>FIFO<46><4F><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ͷ<EFBFBD><CDB7><EFBFBD><EFBFBD>ʼ<EFBFBD><CABC><EFBFBD><EFBFBD>*/
if ( j > 0 )
{
fifo_buffer = fifo->buffer;
for( i = 0; i < j; i++ )
{
*( buffer++ ) = *( fifo_buffer++ ) ;
}
}
/* <20><>¼<EFBFBD>ѳ<EFBFBD><D1B3>ӵij<D3B5><C4B3><EFBFBD> */
fifo->out += length;
/* <20><><EFBFBD><EFBFBD>FIFO<46><4F><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ݳ<EFBFBD><DDB3><EFBFBD>С<EFBFBD><D0A1><EFBFBD>û<EFBFBD>ʵ<EFBFBD><CAB5><EFBFBD><EFBFBD>Ҫ<EFBFBD><D2AA><EFBFBD>ݵij<DDB5><C4B3>ȣ<EFBFBD><C8A3>Ǿ<EFBFBD><C7BE><EFBFBD>FIFO<46><4F><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> */
if( length < org_length )
{
return FIFO_ERROR_EMPTY;
}
return FIFO_OK;
}
fifo_error_t fifo_get_length( fifo_t *fifo , uint32_t *length)
{
if( (fifo==0) || (length==0) )
{
return FIFO_ERROR_NULL;
}
*length = fifo->in - fifo->out;
return FIFO_OK;
}
fifo_error_t fifo_get_remain_length( fifo_t *fifo , uint32_t *length)
{
if( (fifo==0) || (length==0) )
{
return FIFO_ERROR_NULL;
}
*length = fifo->size - ( fifo->in - fifo->out );
return FIFO_OK;
}

23
Core/Src/gpio.c
View File

@ -56,9 +56,6 @@ void MX_GPIO_Init(void)
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOB, M1_Pin|LED_RX_Pin, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(USB_CTRL_GPIO_Port, USB_CTRL_Pin, GPIO_PIN_RESET);
/*Configure GPIO pins : PAPin PAPin PAPin */
GPIO_InitStruct.Pin = RESET_Pin|M0_Pin|LED_TX_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
@ -66,8 +63,8 @@ void MX_GPIO_Init(void)
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/*Configure GPIO pins : PBPin PBPin PBPin */
GPIO_InitStruct.Pin = M1_Pin|USB_CTRL_Pin|LED_RX_Pin;
/*Configure GPIO pins : PBPin PBPin */
GPIO_InitStruct.Pin = M1_Pin|LED_RX_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
@ -79,25 +76,9 @@ void MX_GPIO_Init(void)
GPIO_InitStruct.Pull = GPIO_PULLUP;
HAL_GPIO_Init(AUX_GPIO_Port, &GPIO_InitStruct);
/*Configure GPIO pins : PBPin PBPin PBPin */
GPIO_InitStruct.Pin = KEY_UP_Pin|KEY_ENTER_Pin|KEY_DOWN_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
}
/* USER CODE BEGIN 2 */
void gpio_usb_ctrl_on(void)
{
HAL_GPIO_WritePin( USB_CTRL_GPIO_Port , USB_CTRL_Pin , GPIO_PIN_SET );
}
void gpio_usb_ctrl_off(void)
{
HAL_GPIO_WritePin( USB_CTRL_GPIO_Port , USB_CTRL_Pin , GPIO_PIN_RESET );
}
void gpio_led_tx_on(void)
{
HAL_GPIO_WritePin( LED_TX_GPIO_Port, LED_TX_Pin, GPIO_PIN_RESET);

114
Core/Src/i2c.c
View File

@ -1,114 +0,0 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file i2c.c
* @brief This file provides code for the configuration
* of the I2C instances.
******************************************************************************
* @attention
*
* Copyright (c) 2024 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "i2c.h"
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
I2C_HandleTypeDef hi2c2;
/* I2C2 init function */
void MX_I2C2_Init(void)
{
/* USER CODE BEGIN I2C2_Init 0 */
/* USER CODE END I2C2_Init 0 */
/* USER CODE BEGIN I2C2_Init 1 */
/* USER CODE END I2C2_Init 1 */
hi2c2.Instance = I2C2;
hi2c2.Init.ClockSpeed = 400000;
hi2c2.Init.DutyCycle = I2C_DUTYCYCLE_2;
hi2c2.Init.OwnAddress1 = 0;
hi2c2.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
hi2c2.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
hi2c2.Init.OwnAddress2 = 0;
hi2c2.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
hi2c2.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
if (HAL_I2C_Init(&hi2c2) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN I2C2_Init 2 */
/* USER CODE END I2C2_Init 2 */
}
void HAL_I2C_MspInit(I2C_HandleTypeDef* i2cHandle)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(i2cHandle->Instance==I2C2)
{
/* USER CODE BEGIN I2C2_MspInit 0 */
/* USER CODE END I2C2_MspInit 0 */
__HAL_RCC_GPIOB_CLK_ENABLE();
/**I2C2 GPIO Configuration
PB10 ------> I2C2_SCL
PB11 ------> I2C2_SDA
*/
GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11;
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/* I2C2 clock enable */
__HAL_RCC_I2C2_CLK_ENABLE();
/* USER CODE BEGIN I2C2_MspInit 1 */
/* USER CODE END I2C2_MspInit 1 */
}
}
void HAL_I2C_MspDeInit(I2C_HandleTypeDef* i2cHandle)
{
if(i2cHandle->Instance==I2C2)
{
/* USER CODE BEGIN I2C2_MspDeInit 0 */
/* USER CODE END I2C2_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_I2C2_CLK_DISABLE();
/**I2C2 GPIO Configuration
PB10 ------> I2C2_SCL
PB11 ------> I2C2_SDA
*/
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10);
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_11);
/* USER CODE BEGIN I2C2_MspDeInit 1 */
/* USER CODE END I2C2_MspDeInit 1 */
}
}
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */

122
Core/Src/key.c
View File

@ -1,122 +0,0 @@
#include "main.h"
#define KEY_SHORT_PRESS_TIME_MS 100
typedef struct
{
uint32_t count ;
bool continue_enable;
bool is_press;
bool is_continue;
}key_config_t;
static key_config_t key_group[3] =
{
[ KEY_NAME_UP ] = {
.count = 0,
.is_press = 0,
.continue_enable = false,
.is_continue = false,
},
[ KEY_NAME_DOWN ] = {
.count = 0,
.is_press = 0,
.continue_enable = false,
.is_continue = false,
},
[ KEY_NAME_ENTER ] = {
.count = 0,
.is_press = 0,
.continue_enable = false,
.is_continue = false,
}
};
bool key_check_press( key_name_t name )
{
bool ret = false;
/* <20>ϲ<EFBFBD><CFB2><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ѯ״̬<D7B4><CCAC><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ǰ״̬ */
ret = key_group[name].is_press;
/* <20><><EFBFBD><EFBFBD>flash<73><68><EFBFBD><EFBFBD>ֹ<EFBFBD><D6B9><EFBFBD>δ<EFBFBD><CEB4><EFBFBD> */
key_group[name].is_press = false;
return ret;
}
void key_set_continue( key_name_t name , bool enable )
{
key_group[name].continue_enable = enable;
}
static inline void key_press( key_name_t name )
{
key_group[name].count ++;
/* <20><><EFBFBD><EFBFBD><EFBFBD>̰<EFBFBD><CCB0><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ж<EFBFBD>ʱ<EFBFBD><CAB1> */
if( key_group[name].count > KEY_SHORT_PRESS_TIME_MS )
{
/* <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ֹ<EFBFBD><D6B9><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ж<EFBFBD> */
if( key_group[name].continue_enable == false )
{
/* <20><><EFBFBD>ڵ<EFBFBD>һ<EFBFBD>ζ̰<CEB6><CCB0>´<EFBFBD><C2B4><EFBFBD><EFBFBD>ж<EFBFBD> */
if( key_group[name].is_continue == false )
{
/* <20><>ֹ<EFBFBD>´δ<C2B4><CEB4><EFBFBD> ֱ<><D6B1><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ͷ<EFBFBD> <20><><EFBFBD><EFBFBD>false*/
key_group[name].is_continue = true;
/* <20><>һ<EFBFBD>θ<EFBFBD><CEB8><EFBFBD><EFBFBD><EFBFBD><EFBFBD>±<EFBFBD>ʶ */
key_group[name].is_press = true;
}
}
/* <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ж<EFBFBD> */
else
{
/* <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>±<EFBFBD>ʶ */
key_group[name].is_press = true;
/* <20><><EFBFBD>¼<EFBFBD>ʱ */
key_group[name].count = 0;
}
}
}
static inline void key_release( key_name_t name )
{
key_group[ name ].count = 0;
key_group[ name ].is_continue = false;
}
void key_timer_1ms_interrupt_callback(void)
{
if( HAL_GPIO_ReadPin( KEY_UP_GPIO_Port, KEY_UP_Pin ) == RESET )
{
key_press( KEY_NAME_UP );
}
else
{
key_release( KEY_NAME_UP );
}
if( HAL_GPIO_ReadPin( KEY_DOWN_GPIO_Port, KEY_DOWN_Pin ) == RESET )
{
key_press( KEY_NAME_DOWN );
}
else
{
key_release( KEY_NAME_DOWN );
}
if( HAL_GPIO_ReadPin( KEY_ENTER_GPIO_Port, KEY_ENTER_Pin ) == RESET )
{
key_press( KEY_NAME_ENTER );
}
else
{
key_release( KEY_NAME_ENTER );
}
}

13
Core/Src/main.c
View File

@ -20,13 +20,13 @@
#include "main.h"
#include "tim.h"
#include "usart.h"
#include "usb_device.h"
#include "gpio.h"
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
#include "rf433.h"
#include "rf433_config.h"
#include "rf433_hal.h"
#if (RF433_MODE == RF433_MODE_TX) || (RF433_MODE == RF433_MODE_BOTH)
#include "rf433_tx_app.h"
@ -45,8 +45,6 @@
/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */
#include "usbd_cdc_if.h"
extern uint8_t usb_rx_data;
/* USER CODE END PD */
/* Private macro -------------------------------------------------------------*/
@ -97,15 +95,14 @@ int main(void)
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_USART1_UART_Init();
MX_USB_DEVICE_Init();
MX_TIM2_Init();
/* USER CODE BEGIN 2 */
/* 初始化RF433模块 - 使用默认配置 */
rf433_init(NULL);
/* 初始化RF433模块 - 使用默认配置 */
rf433_init(NULL);
/* 启动UART接收 */
HAL_UART_Receive_IT(&huart1, &usb_rx_data, 1);
/* 启动UART接收 - 使用rf433_hal中的临时变量 */
HAL_UART_Receive_IT(&huart1, &rf433_uart_rx_tmp, 1);
/* 根据配置模式初始化TX/RX应用层 */
#if (RF433_MODE == RF433_MODE_TX) || (RF433_MODE == RF433_MODE_BOTH)

16
Core/Src/stm32f1xx_it.c
View File

@ -55,7 +55,6 @@
/* USER CODE END 0 */
/* External variables --------------------------------------------------------*/
extern PCD_HandleTypeDef hpcd_USB_FS;
extern UART_HandleTypeDef huart1;
/* USER CODE BEGIN EV */
/* USER CODE END EV */
@ -183,7 +182,6 @@ void PendSV_Handler(void)
void SysTick_Handler(void)
{
/* USER CODE BEGIN SysTick_IRQn 0 */
key_timer_1ms_interrupt_callback();
systick_interrupt_1ms_callback();
/* USER CODE END SysTick_IRQn 0 */
HAL_IncTick();
@ -199,20 +197,6 @@ void SysTick_Handler(void)
/* please refer to the startup file (startup_stm32f1xx.s). */
/******************************************************************************/
/**
* @brief This function handles USB low priority or CAN RX0 interrupts.
*/
void USB_LP_CAN1_RX0_IRQHandler(void)
{
/* USER CODE BEGIN USB_LP_CAN1_RX0_IRQn 0 */
/* USER CODE END USB_LP_CAN1_RX0_IRQn 0 */
HAL_PCD_IRQHandler(&hpcd_USB_FS);
/* USER CODE BEGIN USB_LP_CAN1_RX0_IRQn 1 */
/* USER CODE END USB_LP_CAN1_RX0_IRQn 1 */
}
/**
* @brief This function handles USART1 global interrupt.
*/

28
Core/Src/tim.c
View File

@ -89,24 +89,12 @@ void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef* tim_pwmHandle)
void HAL_TIM_MspPostInit(TIM_HandleTypeDef* timHandle)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(timHandle->Instance==TIM2)
{
/* USER CODE BEGIN TIM2_MspPostInit 0 */
/* USER CODE END TIM2_MspPostInit 0 */
__HAL_RCC_GPIOB_CLK_ENABLE();
/**TIM2 GPIO Configuration
PB3 ------> TIM2_CH2
*/
GPIO_InitStruct.Pin = BUZZER_PWM_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(BUZZER_PWM_GPIO_Port, &GPIO_InitStruct);
__HAL_AFIO_REMAP_TIM2_PARTIAL_1();
/* USER CODE BEGIN TIM2_MspPostInit 1 */
/* USER CODE END TIM2_MspPostInit 1 */
@ -131,20 +119,4 @@ void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef* tim_pwmHandle)
}
/* USER CODE BEGIN 1 */
void buzzer_on(void)
{
HAL_TIM_PWM_Start( &htim2 , TIM_CHANNEL_2 );
}
void buzzer_off(void)
{
HAL_TIM_PWM_Stop( &htim2 , TIM_CHANNEL_2 );
}
void buzzer_button_press(void)
{
buzzer_on();
HAL_Delay(50);
buzzer_off();
}
/* USER CODE END 1 */

121
Core/Src/u8g2_hal.c
View File

@ -1,121 +0,0 @@
#include "u8g2_hal.h"
#include "menuConfig.h"
#include "i2c.h"
#define HARDWARE_I2C
#define OLED_I2C_DEV_ADDRESS 0x78
#ifdef HARDWARE_I2C
static uint8_t u8x8_byte_hw_i2c(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr) {
uint8_t* data = (uint8_t*) arg_ptr;
switch(msg) {
case U8X8_MSG_BYTE_SEND:
while( arg_int-- > 0 ) {
///@todo <20>޸<EFBFBD>
/* ==================================== */
I2C2->DR = *data++;
while( __HAL_I2C_GET_FLAG(&hi2c2, I2C_FLAG_TXE) == RESET );
/* ==================================== */
}
break;
case U8X8_MSG_BYTE_INIT:
/* add your custom code to init i2c subsystem */
break;
case U8X8_MSG_BYTE_SET_DC:
/* ignored for i2c */
break;
case U8X8_MSG_BYTE_START_TRANSFER:
///@todo <20>޸<EFBFBD>
/* ==================================== */
/* Wait until BUSY flag is reset */
while( __HAL_I2C_GET_FLAG( &hi2c2, I2C_FLAG_BUSY ) == SET );
/* Disable Pos */
CLEAR_BIT( I2C2->CR1, I2C_CR1_POS );
/* Generate Start */
SET_BIT( I2C2->CR1, I2C_CR1_START );
/* Wait until SB flag is set */
while( __HAL_I2C_GET_FLAG( &hi2c2, I2C_FLAG_SB ) == RESET );
/* Send slave address */
I2C2->DR = I2C_7BIT_ADD_WRITE( OLED_I2C_DEV_ADDRESS );
/* Wait until ADDR flag is set */
while ( __HAL_I2C_GET_FLAG( &hi2c2, I2C_FLAG_ADDR) == RESET );
/* Clear ADDR flag */
__HAL_I2C_CLEAR_ADDRFLAG( &hi2c2 );
/* Wait until TXE flag is set */
while( __HAL_I2C_GET_FLAG(&hi2c2, I2C_FLAG_TXE) == RESET );
/* ==================================== */
break;
case U8X8_MSG_BYTE_END_TRANSFER:
///@todo <20>޸<EFBFBD>
/* ==================================== */
/* Generate Stop */
SET_BIT( I2C2->CR1, I2C_CR1_STOP );
/* ==================================== */
break;
default:
return 0;
}
return 1;
}
static uint8_t u8x8_gpio_and_delay_hw(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr) {
switch (msg) {
case U8X8_MSG_DELAY_100NANO: // delay arg_int * 100 nano seconds
break;
case U8X8_MSG_DELAY_10MICRO: // delay arg_int * 10 micro seconds
break;
case U8X8_MSG_DELAY_MILLI: // delay arg_int * 1 milli second
HAL_Delay(1);
break;
case U8X8_MSG_DELAY_I2C: // arg_int is the I2C speed in 100KHz, e.g. 4 = 400 KHz
break; // arg_int=1: delay by 5us, arg_int = 4: delay by 1.25us
case U8X8_MSG_GPIO_I2C_CLOCK: // arg_int=0: Output low at I2C clock pin
break; // arg_int=1: Input dir with pullup high for I2C clock pin
case U8X8_MSG_GPIO_I2C_DATA: // arg_int=0: Output low at I2C data pin
break; // arg_int=1: Input dir with pullup high for I2C data pin
case U8X8_MSG_GPIO_MENU_SELECT:
u8x8_SetGPIOResult(u8x8, /* get menu select pin state */ 0);
break;
case U8X8_MSG_GPIO_MENU_NEXT:
u8x8_SetGPIOResult(u8x8, /* get menu next pin state */ 0);
break;
case U8X8_MSG_GPIO_MENU_PREV:
u8x8_SetGPIOResult(u8x8, /* get menu prev pin state */ 0);
break;
case U8X8_MSG_GPIO_MENU_HOME:
u8x8_SetGPIOResult(u8x8, /* get menu home pin state */ 0);
break;
default:
u8x8_SetGPIOResult(u8x8, 1); // default return value
break;
}
return 1;
}
//static void HardWare_I2C2_GPIOInit(void)
//{
//}
#endif
void u8g2Init(u8g2_t *u8g2)
{
#ifdef HARDWARE_I2C
// HardWare_I2C2_GPIOInit();//<2F><><EFBFBD><EFBFBD>i2c.c<><63><EFBFBD><EFBFBD><EFBFBD>ɳ<EFBFBD>ʼ<EFBFBD><CABC>
u8g2_Setup_ssd1306_i2c_128x64_noname_f(u8g2, U8G2_R0, u8x8_byte_hw_i2c, u8x8_gpio_and_delay_hw);
#endif
u8g2_InitDisplay(u8g2);
u8g2_SetPowerSave(u8g2, 0);
u8g2_ClearBuffer(u8g2);
}

15
Core/Src/usart.c
View File

@ -22,11 +22,7 @@
/* USER CODE BEGIN 0 */
#include <stdbool.h>
#include "usbd_cdc_if.h"
#include "rf433_hal.h"
uint8_t usb_rx_data;
uart_feature current_feature = FUNC_FEATURE1;
/* USER CODE END 0 */
UART_HandleTypeDef huart1;
@ -149,16 +145,5 @@ void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
}
}
void usb_receive_to_tx_send( void )
{
HAL_Delay(1);
if(usb_rx_complete)
{
HAL_UART_Transmit(&huart1,my_usb_rx_data, my_usb_rx_num ,500);
memset(my_usb_rx_data, 0, my_usb_rx_num);
my_usb_rx_num = 0;
usb_rx_complete = 0;
}
}
/* USER CODE END 1 */

2
Driver_RF433/Inc/rf433_config.h
View File

@ -28,7 +28,7 @@ extern "C" {
#define RF433_MODE_BOTH 3
#ifndef RF433_MODE
#define RF433_MODE RF433_MODE_RX
#define RF433_MODE RF433_MODE_TX
#endif
/* ============================================================================

6
Driver_RF433/Inc/rf433_hal.h
View File

@ -210,6 +210,12 @@ bool uart1_check_rx_done(uint8_t *buffer, uint32_t *length);
*/
bool rf433_hal_check_rx_done(void);
/**
* @brief UART接收临时变量（用于HAL_UART_Receive_IT）
* @note 此变量在rf433_hal.c中定义
*/
extern uint8_t rf433_uart_rx_tmp;
#ifdef __cplusplus
}
#endif

194
Driver_RF433/Src/rf433_hal.c
View File

@ -12,7 +12,6 @@
#include "main.h"
#include "gpio.h"
#include "usart.h"
#include "fifo.h"
/* ============================================================================
* 私有变量
@ -22,10 +21,99 @@ static bool rf433_hal_initialized = false;
/* FIFO缓冲区 */
static uint8_t rf433_fifo_buffer[1024];
static fifo_t rf433_fifo;
static volatile uint32_t rf433_fifo_head = 0;
static volatile uint32_t rf433_fifo_tail = 0;
static volatile uint32_t rf433_fifo_count = 0;
#define RF433_FIFO_SIZE 1024
/* ============================================================================
* 私有FIFO函数
* ============================================================================ */
/**
* @brief FIFO写入数据
*/
static rf433_hal_error_t rf433_fifo_write(const uint8_t *data, uint16_t length)
{
uint16_t i;
if (data == NULL || length == 0)
{
return RF433_HAL_ERROR_INVALID_PARAM;
}
for (i = 0; i < length; i++)
{
if (rf433_fifo_count >= RF433_FIFO_SIZE)
{
return RF433_HAL_ERROR;
}
rf433_fifo_buffer[rf433_fifo_head] = data[i];
rf433_fifo_head = (rf433_fifo_head + 1) % RF433_FIFO_SIZE;
rf433_fifo_count++;
}
return RF433_HAL_OK;
}
/**
* @brief FIFO读取数据
*/
static rf433_hal_error_t rf433_fifo_read(uint8_t *data, uint16_t length, uint16_t *actual_length)
{
uint16_t i;
if (data == NULL || length == 0 || actual_length == NULL)
{
return RF433_HAL_ERROR_INVALID_PARAM;
}
if (rf433_fifo_count == 0)
{
*actual_length = 0;
return RF433_HAL_ERROR;
}
*actual_length = 0;
for (i = 0; i < length && rf433_fifo_count > 0; i++)
{
data[i] = rf433_fifo_buffer[rf433_fifo_tail];
rf433_fifo_tail = (rf433_fifo_tail + 1) % RF433_FIFO_SIZE;
rf433_fifo_count--;
(*actual_length)++;
}
return RF433_HAL_OK;
}
/**
* @brief 获取FIFO数据长度
*/
static rf433_hal_error_t rf433_fifo_get_length(uint16_t *length)
{
if (length == NULL)
{
return RF433_HAL_ERROR_INVALID_PARAM;
}
*length = rf433_fifo_count;
return RF433_HAL_OK;
}
/**
* @brief 清空FIFO
*/
static rf433_hal_error_t rf433_fifo_clear(void)
{
rf433_fifo_head = 0;
rf433_fifo_tail = 0;
rf433_fifo_count = 0;
return RF433_HAL_OK;
}
/* UART接收相关变量 */
static uint8_t rf433_uart_rx_tmp;
uint8_t rf433_uart_rx_tmp;
static volatile uint32_t rf433_uart_rx_timeout = 0;
static volatile bool rf433_uart_rx_done = false;
@ -38,8 +126,6 @@ static volatile bool rf433_uart_rx_done = false;
*/
rf433_hal_error_t rf433_hal_init(void)
{
fifo_error_t ret;
/* 检查是否已初始化 */
if (rf433_hal_initialized)
{
@ -47,11 +133,9 @@ rf433_hal_error_t rf433_hal_init(void)
}
/* 初始化FIFO */
ret = fifo_create(&rf433_fifo, rf433_fifo_buffer, sizeof(rf433_fifo_buffer));
if (ret != FIFO_OK)
{
return RF433_HAL_ERROR;
}
rf433_fifo_head = 0;
rf433_fifo_tail = 0;
rf433_fifo_count = 0;
rf433_hal_initialized = true;
return RF433_HAL_OK;
@ -101,7 +185,7 @@ rf433_hal_error_t rf433_hal_uart_tx(uint8_t *buffer, uint16_t length)
void rf433_hal_uart_rx_callback(uint8_t *data, uint16_t length)
{
/* 写入FIFO */
fifo_write(&rf433_fifo, data, length);
rf433_fifo_write(data, length);
/* 设置超时 */
rf433_uart_rx_timeout = 10;
@ -231,22 +315,7 @@ rf433_hal_error_t rf433_hal_reset(void)
*/
rf433_hal_error_t rf433_hal_fifo_write(const uint8_t *data, uint16_t length)
{
fifo_error_t ret;
/* 参数检查 */
if (data == NULL || length == 0)
{
return RF433_HAL_ERROR_INVALID_PARAM;
}
/* 写入FIFO */
ret = fifo_write(&rf433_fifo, (uint8_t *)data, length);
if (ret != FIFO_OK)
{
return RF433_HAL_ERROR;
}
return RF433_HAL_OK;
return rf433_fifo_write(data, length);
}
/**
@ -254,44 +323,7 @@ rf433_hal_error_t rf433_hal_fifo_write(const uint8_t *data, uint16_t length)
*/
rf433_hal_error_t rf433_hal_fifo_read(uint8_t *data, uint16_t length, uint16_t *actual_length)
{
fifo_error_t ret;
uint32_t fifo_length;
/* 参数检查 */
if (data == NULL || length == 0 || actual_length == NULL)
{
return RF433_HAL_ERROR_INVALID_PARAM;
}
/* 获取FIFO长度 */
ret = fifo_get_length(&rf433_fifo, &fifo_length);
if (ret != FIFO_OK)
{
return RF433_HAL_ERROR;
}
/* 检查是否有数据 */
if (fifo_length == 0)
{
*actual_length = 0;
return RF433_HAL_ERROR;
}
/* 读取数据 */
if (fifo_length > length)
{
fifo_length = length;
}
ret = fifo_read(&rf433_fifo, data, fifo_length);
if (ret != FIFO_OK)
{
*actual_length = 0;
return RF433_HAL_ERROR;
}
*actual_length = fifo_length;
return RF433_HAL_OK;
return rf433_fifo_read(data, length, actual_length);
}
/**
@ -299,24 +331,7 @@ rf433_hal_error_t rf433_hal_fifo_read(uint8_t *data, uint16_t length, uint16_t *
*/
rf433_hal_error_t rf433_hal_fifo_get_length(uint16_t *length)
{
fifo_error_t ret;
uint32_t fifo_length;
/* 参数检查 */
if (length == NULL)
{
return RF433_HAL_ERROR_INVALID_PARAM;
}
/* 获取FIFO长度 */
ret = fifo_get_length(&rf433_fifo, &fifo_length);
if (ret != FIFO_OK)
{
return RF433_HAL_ERROR;
}
*length = fifo_length;
return RF433_HAL_OK;
return rf433_fifo_get_length(length);
}
/**
@ -324,16 +339,7 @@ rf433_hal_error_t rf433_hal_fifo_get_length(uint16_t *length)
*/
rf433_hal_error_t rf433_hal_fifo_clear(void)
{
fifo_error_t ret;
/* 清空FIFO */
ret = fifo_clear(&rf433_fifo);
if (ret != FIFO_OK)
{
return RF433_HAL_ERROR;
}
return RF433_HAL_OK;
return rf433_fifo_clear();
}
/**
@ -369,7 +375,7 @@ void rf433_hal_uart_rxcplt_callback(void)
data = huart1.Instance->DR;
/* 写入FIFO */
fifo_write(&rf433_fifo, &data, 1);
rf433_fifo_write(&data, 1);
/* 设置超时 */
rf433_uart_rx_timeout = 10;

70
MDK-ARM/project.uvguix.xtell
View File

File diff suppressed because one or more lines are too long

848
MDK-ARM/project.uvoptx
View File

File diff suppressed because it is too large Load Diff

315
MDK-ARM/project.uvprojx
View File

@ -394,36 +394,11 @@
<Group>
<GroupName>Application/User/Core</GroupName>
<Files>
<File>
<FileName>fifo.c</FileName>
<FileType>1</FileType>
<FilePath>..\Core\Src\fifo.c</FilePath>
</File>
<File>
<FileName>systick.c</FileName>
<FileType>1</FileType>
<FilePath>..\Core\Src\systick.c</FilePath>
</File>
<File>
<FileName>u8g2_hal.c</FileName>
<FileType>1</FileType>
<FilePath>..\Core\Src\u8g2_hal.c</FilePath>
</File>
<File>
<FileName>key.c</FileName>
<FileType>1</FileType>
<FilePath>..\Core\Src\key.c</FilePath>
</File>
<File>
<FileName>e32_hal.c</FileName>
<FileType>1</FileType>
<FilePath>..\Core\Src\e32_hal.c</FilePath>
</File>
<File>
<FileName>e32_demo.c</FileName>
<FileType>1</FileType>
<FilePath>..\Core\Src\e32_demo.c</FilePath>
</File>
<File>
<FileName>main.c</FileName>
<FileType>1</FileType>
@ -434,11 +409,6 @@
<FileType>1</FileType>
<FilePath>../Core/Src/gpio.c</FilePath>
</File>
<File>
<FileName>i2c.c</FileName>
<FileType>1</FileType>
<FilePath>../Core/Src/i2c.c</FilePath>
</File>
<File>
<FileName>tim.c</FileName>
<FileType>1</FileType>
@ -522,36 +492,6 @@
</File>
</Files>
</Group>
<Group>
<GroupName>Application/User/USB_DEVICE/App</GroupName>
<Files>
<File>
<FileName>usb_device.c</FileName>
<FileType>1</FileType>
<FilePath>../USB_DEVICE/App/usb_device.c</FilePath>
</File>
<File>
<FileName>usbd_desc.c</FileName>
<FileType>1</FileType>
<FilePath>../USB_DEVICE/App/usbd_desc.c</FilePath>
</File>
<File>
<FileName>usbd_cdc_if.c</FileName>
<FileType>1</FileType>
<FilePath>../USB_DEVICE/App/usbd_cdc_if.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>Application/User/USB_DEVICE/Target</GroupName>
<Files>
<File>
<FileName>usbd_conf.c</FileName>
<FileType>1</FileType>
<FilePath>../USB_DEVICE/Target/usbd_conf.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>Drivers/STM32F1xx_HAL_Driver</GroupName>
<Files>
@ -657,261 +597,6 @@
</File>
</Files>
</Group>
<Group>
<GroupName>Middlewares/USB_Device_Library</GroupName>
<Files>
<File>
<FileName>usbd_core.c</FileName>
<FileType>1</FileType>
<FilePath>../Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c</FilePath>
</File>
<File>
<FileName>usbd_ctlreq.c</FileName>
<FileType>1</FileType>
<FilePath>../Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c</FilePath>
</File>
<File>
<FileName>usbd_ioreq.c</FileName>
<FileType>1</FileType>
<FilePath>../Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c</FilePath>
</File>
<File>
<FileName>usbd_cdc.c</FileName>
<FileType>1</FileType>
<FilePath>../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>Middlewares/u8g2_lib</GroupName>
<Files>
<File>
<FileName>mui.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\mui.c</FilePath>
</File>
<File>
<FileName>mui_u8g2.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\mui_u8g2.c</FilePath>
</File>
<File>
<FileName>u8g2_bitmap.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8g2_bitmap.c</FilePath>
</File>
<File>
<FileName>u8g2_box.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8g2_box.c</FilePath>
</File>
<File>
<FileName>u8g2_buffer.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8g2_buffer.c</FilePath>
</File>
<File>
<FileName>u8g2_button.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8g2_button.c</FilePath>
</File>
<File>
<FileName>u8g2_circle.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8g2_circle.c</FilePath>
</File>
<File>
<FileName>u8g2_cleardisplay.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8g2_cleardisplay.c</FilePath>
</File>
<File>
<FileName>u8g2_d_memory.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8g2_d_memory.c</FilePath>
</File>
<File>
<FileName>u8g2_d_setup.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8g2_d_setup.c</FilePath>
</File>
<File>
<FileName>u8g2_font.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8g2_font.c</FilePath>
</File>
<File>
<FileName>u8g2_fonts.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8g2_fonts.c</FilePath>
</File>
<File>
<FileName>u8g2_hvline.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8g2_hvline.c</FilePath>
</File>
<File>
<FileName>u8g2_input_value.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8g2_input_value.c</FilePath>
</File>
<File>
<FileName>u8g2_intersection.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8g2_intersection.c</FilePath>
</File>
<File>
<FileName>u8g2_kerning.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8g2_kerning.c</FilePath>
</File>
<File>
<FileName>u8g2_line.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8g2_line.c</FilePath>
</File>
<File>
<FileName>u8g2_ll_hvline.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8g2_ll_hvline.c</FilePath>
</File>
<File>
<FileName>u8g2_message.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8g2_message.c</FilePath>
</File>
<File>
<FileName>u8g2_polygon.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8g2_polygon.c</FilePath>
</File>
<File>
<FileName>u8g2_selection_list.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8g2_selection_list.c</FilePath>
</File>
<File>
<FileName>u8g2_setup.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8g2_setup.c</FilePath>
</File>
<File>
<FileName>u8log.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8log.c</FilePath>
</File>
<File>
<FileName>u8log_u8g2.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8log_u8g2.c</FilePath>
</File>
<File>
<FileName>u8log_u8x8.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8log_u8x8.c</FilePath>
</File>
<File>
<FileName>u8x8_8x8.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8x8_8x8.c</FilePath>
</File>
<File>
<FileName>u8x8_byte.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8x8_byte.c</FilePath>
</File>
<File>
<FileName>u8x8_cad.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8x8_cad.c</FilePath>
</File>
<File>
<FileName>u8x8_capture.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8x8_capture.c</FilePath>
</File>
<File>
<FileName>u8x8_d_ssd1306_128x64_noname.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8x8_d_ssd1306_128x64_noname.c</FilePath>
</File>
<File>
<FileName>u8x8_debounce.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8x8_debounce.c</FilePath>
</File>
<File>
<FileName>u8x8_display.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8x8_display.c</FilePath>
</File>
<File>
<FileName>u8x8_fonts.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8x8_fonts.c</FilePath>
</File>
<File>
<FileName>u8x8_gpio.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8x8_gpio.c</FilePath>
</File>
<File>
<FileName>u8x8_input_value.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8x8_input_value.c</FilePath>
</File>
<File>
<FileName>u8x8_message.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8x8_message.c</FilePath>
</File>
<File>
<FileName>u8x8_selection_list.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8x8_selection_list.c</FilePath>
</File>
<File>
<FileName>u8x8_setup.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8x8_setup.c</FilePath>
</File>
<File>
<FileName>u8x8_string.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8x8_string.c</FilePath>
</File>
<File>
<FileName>u8x8_u8toa.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8x8_u8toa.c</FilePath>
</File>
<File>
<FileName>u8x8_u16toa.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\u8g2Lib\src\u8x8_u16toa.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>Middlewares/MultMenu</GroupName>
<Files>
<File>
<FileName>application.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\MultMenu\application\application.c</FilePath>
</File>
<File>
<FileName>dispDirver.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\MultMenu\disp\dispDirver.c</FilePath>
</File>
<File>
<FileName>menu.c</FileName>
<FileType>1</FileType>
<FilePath>..\Middlewares\MultMenu\menu\menu.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>Driver_RF433</GroupName>
<Files>

BIN
MDK-ARM/project/application.o
View File

Binary file not shown.

BIN
MDK-ARM/project/dispdirver.o
View File

Binary file not shown.

BIN
MDK-ARM/project/e32_demo.o
View File

Binary file not shown.

BIN
MDK-ARM/project/e32_hal.o
View File

Binary file not shown.

BIN
MDK-ARM/project/fifo.o
View File

Binary file not shown.

BIN
MDK-ARM/project/gpio.crf
View File

Binary file not shown.

7
MDK-ARM/project/gpio.d
View File

@ -35,10 +35,3 @@ project\gpio.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h
project\gpio.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h
project\gpio.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdbool.h
project\gpio.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
project\gpio.o: ../Middlewares/MultMenu/application/application.h
project\gpio.o: ../Middlewares/MultMenu/menu/menu.h
project\gpio.o: ../Middlewares/MultMenu/menu/menuConfig.h
project\gpio.o: ../Middlewares/u8g2Lib/inc/u8g2.h
project\gpio.o: ../Middlewares/u8g2Lib/inc/u8x8.h
project\gpio.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdarg.h
project\gpio.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\limits.h

BIN
MDK-ARM/project/gpio.o
View File

Binary file not shown.

BIN
MDK-ARM/project/i2c.o
View File

Binary file not shown.

BIN
MDK-ARM/project/key.o
View File

Binary file not shown.

BIN
MDK-ARM/project/main.crf
View File

Binary file not shown.

20
MDK-ARM/project/main.d
View File

@ -34,28 +34,10 @@ project\main.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h
project\main.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h
project\main.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdbool.h
project\main.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
project\main.o: ../Middlewares/MultMenu/application/application.h
project\main.o: ../Middlewares/MultMenu/menu/menu.h
project\main.o: ../Middlewares/MultMenu/menu/menuConfig.h
project\main.o: ../Middlewares/u8g2Lib/inc/u8g2.h
project\main.o: ../Middlewares/u8g2Lib/inc/u8x8.h
project\main.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdarg.h
project\main.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\limits.h
project\main.o: ../Core/Inc/tim.h
project\main.o: ../Core/Inc/usart.h
project\main.o: ../USB_DEVICE/App/usb_device.h
project\main.o: ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h
project\main.o: ../USB_DEVICE/Target/usbd_conf.h
project\main.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdlib.h
project\main.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\string.h
project\main.o: ../Core/Inc/gpio.h
project\main.o: ..\Driver_RF433\Inc\rf433.h
project\main.o: ..\Driver_RF433\Inc\rf433_config.h
project\main.o: ..\Driver_RF433\Inc\rf433_hal.h
project\main.o: ../Core/Inc/rf433_rx_app.h
project\main.o: ../USB_DEVICE/App/usbd_cdc_if.h
project\main.o: ../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h
project\main.o: ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h
project\main.o: ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h
project\main.o: ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h
project\main.o: ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h
project\main.o: ../Core/Inc/rf433_tx_app.h

BIN
MDK-ARM/project/main.o
View File

Binary file not shown.

BIN
MDK-ARM/project/menu.o
View File

Binary file not shown.

BIN
MDK-ARM/project/mui.o
View File

Binary file not shown.

BIN
MDK-ARM/project/mui_u8g2.o
View File

Binary file not shown.

BIN
MDK-ARM/project/project.axf
View File

Binary file not shown.

100
MDK-ARM/project/project.build_log.htm
View File

@ -28,92 +28,34 @@ Project File Date: 03/24/2026
*** Using Compiler 'V5.06 update 7 (build 960)', folder: 'C:\Keil_v5\ARM\ARMCC\Bin'
Rebuild target 'project'
assembling startup_stm32f103xb.s...
compiling fifo.c...
compiling e32_hal.c...
compiling systick.c...
compiling u8g2_hal.c...
compiling e32_demo.c...
compiling gpio.c...
compiling key.c...
compiling main.c...
compiling rf433_tx_app.c...
compiling stm32f1xx_hal_msp.c...
compiling tim.c...
compiling i2c.c...
compiling stm32f1xx_it.c...
compiling rf433_rx_app.c...
..\Core\Src\rf433_rx_app.c(23): warning: #188-D: enumerated type mixed with another type
static rf433_rx_app_t g_rx_app = {0};
..\Core\Src\rf433_rx_app.c: 1 warning, 0 errors
compiling usb_device.c...
compiling systick.c...
compiling stm32f1xx_it.c...
compiling tim.c...
compiling stm32f1xx_hal_msp.c...
compiling usart.c...
compiling gpio.c...
compiling stm32f1xx_hal_gpio_ex.c...
compiling stm32f1xx_hal_pcd_ex.c...
compiling stm32f1xx_hal.c...
compiling rf433_tx_app.c...
..\Core\Src\rf433_tx_app.c(22): warning: #188-D: enumerated type mixed with another type
static rf433_tx_app_t g_tx_app = {0};
..\Core\Src\rf433_tx_app.c: 1 warning, 0 errors
compiling stm32f1xx_ll_usb.c...
compiling stm32f1xx_hal_pcd.c...
compiling usbd_desc.c...
compiling usbd_conf.c...
compiling usbd_cdc_if.c...
compiling stm32f1xx_hal_rcc_ex.c...
compiling stm32f1xx_hal_pwr.c...
compiling stm32f1xx_hal_dma.c...
compiling stm32f1xx_hal.c...
compiling stm32f1xx_hal_pcd_ex.c...
compiling stm32f1xx_hal_rcc.c...
compiling stm32f1xx_hal_gpio.c...
compiling stm32f1xx_hal_cortex.c...
compiling stm32f1xx_hal_rcc.c...
compiling stm32f1xx_hal_dma.c...
compiling stm32f1xx_hal_rcc_ex.c...
compiling stm32f1xx_hal_pwr.c...
compiling stm32f1xx_hal_flash.c...
compiling stm32f1xx_hal_flash_ex.c...
compiling system_stm32f1xx.c...
compiling stm32f1xx_hal_exti.c...
compiling stm32f1xx_hal_tim_ex.c...
compiling stm32f1xx_hal_uart.c...
compiling stm32f1xx_hal_i2c.c...
compiling stm32f1xx_hal_tim.c...
compiling mui.c...
compiling u8g2_bitmap.c...
compiling mui_u8g2.c...
compiling u8g2_box.c...
compiling u8g2_buffer.c...
compiling u8g2_button.c...
compiling u8g2_cleardisplay.c...
compiling u8g2_circle.c...
compiling u8g2_d_memory.c...
compiling u8g2_d_setup.c...
compiling u8g2_fonts.c...
compiling u8g2_font.c...
compiling u8g2_hvline.c...
compiling u8g2_input_value.c...
compiling u8g2_intersection.c...
compiling u8g2_kerning.c...
compiling u8g2_line.c...
compiling u8g2_ll_hvline.c...
compiling system_stm32f1xx.c...
compiling u8g2_message.c...
compiling u8g2_polygon.c...
compiling u8g2_setup.c...
compiling u8g2_selection_list.c...
compiling u8log.c...
compiling u8log_u8x8.c...
compiling u8log_u8g2.c...
compiling u8x8_8x8.c...
compiling usbd_ctlreq.c...
compiling u8x8_byte.c...
compiling u8x8_capture.c...
compiling u8x8_cad.c...
compiling u8x8_d_ssd1306_128x64_noname.c...
compiling u8x8_debounce.c...
compiling usbd_cdc.c...
compiling u8x8_display.c...
compiling usbd_ioreq.c...
compiling usbd_core.c...
compiling u8x8_gpio.c...
compiling u8x8_fonts.c...
compiling u8x8_input_value.c...
compiling u8x8_message.c...
compiling u8x8_setup.c...
compiling u8x8_string.c...
compiling u8x8_selection_list.c...
compiling u8x8_u8toa.c...
compiling u8x8_u16toa.c...
compiling rf433.c...
..\Driver_RF433\Src\rf433.c(208): warning: #188-D: enumerated type mixed with another type
ret = rf433_set_config(&rf433_current_config);
@ -124,12 +66,12 @@ compiling rf433.c...
..\Driver_RF433\Src\rf433.c(131): warning: #177-D: function "rf433_response_command_check" was declared but never referenced
static bool rf433_response_command_check(rf433_request_cmd_t cmd, uint8_t *buffer, uint8_t length)
..\Driver_RF433\Src\rf433.c: 4 warnings, 0 errors
compiling stm32f1xx_hal_uart.c...
compiling stm32f1xx_hal_tim.c...
compiling stm32f1xx_hal_i2c.c...
compiling rf433_hal.c...
compiling dispDirver.c...
compiling application.c...
compiling menu.c...
linking...
Program Size: Code=26904 RO-data=408 RW-data=428 ZI-data=8372
Program Size: Code=10126 RO-data=346 RW-data=56 ZI-data=3248
FromELF: creating hex file...
"project\project.axf" - 0 Error(s), 5 Warning(s).
@ -155,7 +97,7 @@ Package Vendor: Keil
* Component: ARM::CMSIS:CORE@6.1.1
Include file: CMSIS/Core/Include/tz_context.h
Build Time Elapsed: 00:00:34
Build Time Elapsed: 00:00:22
</pre>
</body>
</html>

2358
MDK-ARM/project/project.hex
View File

File diff suppressed because it is too large Load Diff

2098
MDK-ARM/project/project.htm
View File

File diff suppressed because it is too large Load Diff

58
MDK-ARM/project/project.lnp
View File

@ -1,24 +1,14 @@
--cpu Cortex-M3
"project\startup_stm32f103xb.o"
"project\fifo.o"
"project\systick.o"
"project\u8g2_hal.o"
"project\key.o"
"project\e32_hal.o"
"project\e32_demo.o"
"project\main.o"
"project\gpio.o"
"project\i2c.o"
"project\tim.o"
"project\usart.o"
"project\stm32f1xx_it.o"
"project\stm32f1xx_hal_msp.o"
"project\rf433_rx_app.o"
"project\rf433_tx_app.o"
"project\usb_device.o"
"project\usbd_desc.o"
"project\usbd_cdc_if.o"
"project\usbd_conf.o"
"project\stm32f1xx_hal_gpio_ex.o"
"project\stm32f1xx_hal_pcd.o"
"project\stm32f1xx_hal_pcd_ex.o"
@ -38,54 +28,6 @@
"project\stm32f1xx_hal_tim_ex.o"
"project\stm32f1xx_hal_uart.o"
"project\system_stm32f1xx.o"
"project\usbd_core.o"
"project\usbd_ctlreq.o"
"project\usbd_ioreq.o"
"project\usbd_cdc.o"
"project\mui.o"
"project\mui_u8g2.o"
"project\u8g2_bitmap.o"
"project\u8g2_box.o"
"project\u8g2_buffer.o"
"project\u8g2_button.o"
"project\u8g2_circle.o"
"project\u8g2_cleardisplay.o"
"project\u8g2_d_memory.o"
"project\u8g2_d_setup.o"
"project\u8g2_font.o"
"project\u8g2_fonts.o"
"project\u8g2_hvline.o"
"project\u8g2_input_value.o"
"project\u8g2_intersection.o"
"project\u8g2_kerning.o"
"project\u8g2_line.o"
"project\u8g2_ll_hvline.o"
"project\u8g2_message.o"
"project\u8g2_polygon.o"
"project\u8g2_selection_list.o"
"project\u8g2_setup.o"
"project\u8log.o"
"project\u8log_u8g2.o"
"project\u8log_u8x8.o"
"project\u8x8_8x8.o"
"project\u8x8_byte.o"
"project\u8x8_cad.o"
"project\u8x8_capture.o"
"project\u8x8_d_ssd1306_128x64_noname.o"
"project\u8x8_debounce.o"
"project\u8x8_display.o"
"project\u8x8_fonts.o"
"project\u8x8_gpio.o"
"project\u8x8_input_value.o"
"project\u8x8_message.o"
"project\u8x8_selection_list.o"
"project\u8x8_setup.o"
"project\u8x8_string.o"
"project\u8x8_u8toa.o"
"project\u8x8_u16toa.o"
"project\application.o"
"project\dispdirver.o"
"project\menu.o"
"project\rf433.o"
"project\rf433_hal.o"
--library_type=microlib --strict --scatter "project\project.sct"

3591
MDK-ARM/project/project.map
View File

File diff suppressed because it is too large Load Diff

1190
MDK-ARM/project/project_project.dep
View File

File diff suppressed because it is too large Load Diff

BIN
MDK-ARM/project/rf433.crf
View File

Binary file not shown.

BIN
MDK-ARM/project/rf433.o
View File

Binary file not shown.

BIN
MDK-ARM/project/rf433_hal.crf
View File

Binary file not shown.

8
MDK-ARM/project/rf433_hal.d
View File

@ -35,13 +35,5 @@ project\rf433_hal.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h
project\rf433_hal.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h
project\rf433_hal.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h
project\rf433_hal.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
project\rf433_hal.o: ../Middlewares/MultMenu/application/application.h
project\rf433_hal.o: ../Middlewares/MultMenu/menu/menu.h
project\rf433_hal.o: ../Middlewares/MultMenu/menu/menuConfig.h
project\rf433_hal.o: ../Middlewares/u8g2Lib/inc/u8g2.h
project\rf433_hal.o: ../Middlewares/u8g2Lib/inc/u8x8.h
project\rf433_hal.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdarg.h
project\rf433_hal.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\limits.h
project\rf433_hal.o: ../Core/Inc/gpio.h
project\rf433_hal.o: ../Core/Inc/usart.h
project\rf433_hal.o: ../Core/Inc/fifo.h

BIN
MDK-ARM/project/rf433_hal.o
View File

Binary file not shown.

BIN
MDK-ARM/project/rf433_rx_app.crf
View File

Binary file not shown.

46
MDK-ARM/project/rf433_rx_app.d
View File

@ -1,48 +1,2 @@
project\rf433_rx_app.o: ..\Core\Src\rf433_rx_app.c
project\rf433_rx_app.o: ..\Driver_RF433\Inc\rf433_config.h
project\rf433_rx_app.o: ../Core/Inc/rf433_rx_app.h
project\rf433_rx_app.o: ..\Driver_RF433\Inc\rf433.h
project\rf433_rx_app.o: ..\Driver_RF433\Inc\rf433_hal.h
project\rf433_rx_app.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
project\rf433_rx_app.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdbool.h
project\rf433_rx_app.o: ../Core/Inc/main.h
project\rf433_rx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
project\rf433_rx_app.o: ../Core/Inc/stm32f1xx_hal_conf.h
project\rf433_rx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h
project\rf433_rx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h
project\rf433_rx_app.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
project\rf433_rx_app.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
project\rf433_rx_app.o: ../Drivers/CMSIS/Include/core_cm3.h
project\rf433_rx_app.o: ../Drivers/CMSIS/Include/cmsis_version.h
project\rf433_rx_app.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
project\rf433_rx_app.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
project\rf433_rx_app.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
project\rf433_rx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
project\rf433_rx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
project\rf433_rx_app.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
project\rf433_rx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
project\rf433_rx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
project\rf433_rx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h
project\rf433_rx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h
project\rf433_rx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h
project\rf433_rx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h
project\rf433_rx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h
project\rf433_rx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h
project\rf433_rx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h
project\rf433_rx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_i2c.h
project\rf433_rx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h
project\rf433_rx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h
project\rf433_rx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h
project\rf433_rx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h
project\rf433_rx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h
project\rf433_rx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h
project\rf433_rx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h
project\rf433_rx_app.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
project\rf433_rx_app.o: ../Middlewares/MultMenu/application/application.h
project\rf433_rx_app.o: ../Middlewares/MultMenu/menu/menu.h
project\rf433_rx_app.o: ../Middlewares/MultMenu/menu/menuConfig.h
project\rf433_rx_app.o: ../Middlewares/u8g2Lib/inc/u8g2.h
project\rf433_rx_app.o: ../Middlewares/u8g2Lib/inc/u8x8.h
project\rf433_rx_app.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdarg.h
project\rf433_rx_app.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\limits.h
project\rf433_rx_app.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\string.h

BIN
MDK-ARM/project/rf433_rx_app.o
View File

Binary file not shown.

BIN
MDK-ARM/project/rf433_tx_app.crf
View File

Binary file not shown.

39
MDK-ARM/project/rf433_tx_app.d
View File

@ -1,2 +1,41 @@
project\rf433_tx_app.o: ..\Core\Src\rf433_tx_app.c
project\rf433_tx_app.o: ..\Driver_RF433\Inc\rf433_config.h
project\rf433_tx_app.o: ../Core/Inc/rf433_tx_app.h
project\rf433_tx_app.o: ..\Driver_RF433\Inc\rf433.h
project\rf433_tx_app.o: ..\Driver_RF433\Inc\rf433_hal.h
project\rf433_tx_app.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
project\rf433_tx_app.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdbool.h
project\rf433_tx_app.o: ../Core/Inc/main.h
project\rf433_tx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
project\rf433_tx_app.o: ../Core/Inc/stm32f1xx_hal_conf.h
project\rf433_tx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h
project\rf433_tx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h
project\rf433_tx_app.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
project\rf433_tx_app.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
project\rf433_tx_app.o: ../Drivers/CMSIS/Include/core_cm3.h
project\rf433_tx_app.o: ../Drivers/CMSIS/Include/cmsis_version.h
project\rf433_tx_app.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
project\rf433_tx_app.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
project\rf433_tx_app.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
project\rf433_tx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
project\rf433_tx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
project\rf433_tx_app.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
project\rf433_tx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
project\rf433_tx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
project\rf433_tx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h
project\rf433_tx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h
project\rf433_tx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h
project\rf433_tx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h
project\rf433_tx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h
project\rf433_tx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h
project\rf433_tx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h
project\rf433_tx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_i2c.h
project\rf433_tx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h
project\rf433_tx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h
project\rf433_tx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h
project\rf433_tx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h
project\rf433_tx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h
project\rf433_tx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h
project\rf433_tx_app.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h
project\rf433_tx_app.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
project\rf433_tx_app.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\string.h

BIN
MDK-ARM/project/rf433_tx_app.o
View File

Binary file not shown.

BIN
MDK-ARM/project/stm32f1xx_hal.o
View File

Binary file not shown.

BIN
MDK-ARM/project/stm32f1xx_hal_cortex.o
View File

Binary file not shown.

BIN
MDK-ARM/project/stm32f1xx_hal_dma.o
View File

Binary file not shown.

BIN
MDK-ARM/project/stm32f1xx_hal_exti.o
View File

Binary file not shown.

BIN
MDK-ARM/project/stm32f1xx_hal_flash.o
View File

Binary file not shown.

BIN
MDK-ARM/project/stm32f1xx_hal_flash_ex.o
View File

Binary file not shown.

BIN
MDK-ARM/project/stm32f1xx_hal_gpio.o
View File

Binary file not shown.

BIN
MDK-ARM/project/stm32f1xx_hal_gpio_ex.o
View File

Binary file not shown.

BIN
MDK-ARM/project/stm32f1xx_hal_i2c.o
View File

Binary file not shown.

BIN
MDK-ARM/project/stm32f1xx_hal_msp.crf
View File

Binary file not shown.

7
MDK-ARM/project/stm32f1xx_hal_msp.d
View File

@ -34,10 +34,3 @@ project\stm32f1xx_hal_msp.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_us
project\stm32f1xx_hal_msp.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h
project\stm32f1xx_hal_msp.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdbool.h
project\stm32f1xx_hal_msp.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
project\stm32f1xx_hal_msp.o: ../Middlewares/MultMenu/application/application.h
project\stm32f1xx_hal_msp.o: ../Middlewares/MultMenu/menu/menu.h
project\stm32f1xx_hal_msp.o: ../Middlewares/MultMenu/menu/menuConfig.h
project\stm32f1xx_hal_msp.o: ../Middlewares/u8g2Lib/inc/u8g2.h
project\stm32f1xx_hal_msp.o: ../Middlewares/u8g2Lib/inc/u8x8.h
project\stm32f1xx_hal_msp.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdarg.h
project\stm32f1xx_hal_msp.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\limits.h

BIN
MDK-ARM/project/stm32f1xx_hal_msp.o
View File

Binary file not shown.

BIN
MDK-ARM/project/stm32f1xx_hal_pcd.o
View File

Binary file not shown.

BIN
MDK-ARM/project/stm32f1xx_hal_pcd_ex.o
View File

Binary file not shown.

BIN
MDK-ARM/project/stm32f1xx_hal_pwr.o
View File

Binary file not shown.

BIN
MDK-ARM/project/stm32f1xx_hal_rcc.o
View File

Binary file not shown.

BIN
MDK-ARM/project/stm32f1xx_hal_rcc_ex.o
View File

Binary file not shown.

BIN
MDK-ARM/project/stm32f1xx_hal_tim.o
View File

Binary file not shown.

BIN
MDK-ARM/project/stm32f1xx_hal_tim_ex.o
View File

Binary file not shown.

BIN
MDK-ARM/project/stm32f1xx_hal_uart.o
View File

Binary file not shown.

BIN
MDK-ARM/project/stm32f1xx_it.crf
View File

Binary file not shown.

7
MDK-ARM/project/stm32f1xx_it.d
View File

@ -34,11 +34,4 @@ project\stm32f1xx_it.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h
project\stm32f1xx_it.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h
project\stm32f1xx_it.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdbool.h
project\stm32f1xx_it.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
project\stm32f1xx_it.o: ../Middlewares/MultMenu/application/application.h
project\stm32f1xx_it.o: ../Middlewares/MultMenu/menu/menu.h
project\stm32f1xx_it.o: ../Middlewares/MultMenu/menu/menuConfig.h
project\stm32f1xx_it.o: ../Middlewares/u8g2Lib/inc/u8g2.h
project\stm32f1xx_it.o: ../Middlewares/u8g2Lib/inc/u8x8.h
project\stm32f1xx_it.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdarg.h
project\stm32f1xx_it.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\limits.h
project\stm32f1xx_it.o: ../Core/Inc/stm32f1xx_it.h

BIN
MDK-ARM/project/stm32f1xx_it.o
View File

Binary file not shown.

BIN
MDK-ARM/project/stm32f1xx_ll_usb.o
View File

Binary file not shown.

BIN
MDK-ARM/project/system_stm32f1xx.o
View File

Binary file not shown.

BIN
MDK-ARM/project/systick.crf
View File

Binary file not shown.

7
MDK-ARM/project/systick.d
View File

@ -34,10 +34,3 @@ project\systick.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h
project\systick.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h
project\systick.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdbool.h
project\systick.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
project\systick.o: ../Middlewares/MultMenu/application/application.h
project\systick.o: ../Middlewares/MultMenu/menu/menu.h
project\systick.o: ../Middlewares/MultMenu/menu/menuConfig.h
project\systick.o: ../Middlewares/u8g2Lib/inc/u8g2.h
project\systick.o: ../Middlewares/u8g2Lib/inc/u8x8.h
project\systick.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdarg.h
project\systick.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\limits.h

BIN
MDK-ARM/project/systick.o
View File

Binary file not shown.

BIN
MDK-ARM/project/tim.crf
View File

Binary file not shown.

7
MDK-ARM/project/tim.d
View File

@ -35,10 +35,3 @@ project\tim.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h
project\tim.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h
project\tim.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdbool.h
project\tim.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
project\tim.o: ../Middlewares/MultMenu/application/application.h
project\tim.o: ../Middlewares/MultMenu/menu/menu.h
project\tim.o: ../Middlewares/MultMenu/menu/menuConfig.h
project\tim.o: ../Middlewares/u8g2Lib/inc/u8g2.h
project\tim.o: ../Middlewares/u8g2Lib/inc/u8x8.h
project\tim.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdarg.h
project\tim.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\limits.h

BIN
MDK-ARM/project/tim.o
View File

Binary file not shown.

BIN
MDK-ARM/project/u8g2_bitmap.o
View File

Binary file not shown.

BIN
MDK-ARM/project/u8g2_box.o
View File

Binary file not shown.

BIN
MDK-ARM/project/u8g2_buffer.o
View File

Binary file not shown.

BIN
MDK-ARM/project/u8g2_button.o
View File

Binary file not shown.

BIN
MDK-ARM/project/u8g2_circle.o
View File

Binary file not shown.

BIN
MDK-ARM/project/u8g2_cleardisplay.o
View File

Binary file not shown.

BIN
MDK-ARM/project/u8g2_d_memory.o
View File

Binary file not shown.

BIN
MDK-ARM/project/u8g2_d_setup.o
View File

Binary file not shown.

BIN
MDK-ARM/project/u8g2_font.o
View File

Binary file not shown.

BIN
MDK-ARM/project/u8g2_fonts.o
View File

Binary file not shown.

BIN
MDK-ARM/project/u8g2_hal.o
View File

Binary file not shown.

Some files were not shown because too many files have changed in this diff Show More