#ifndef _AUDIO_LINK_H_
#define _AUDIO_LINK_H_

#define ALNK_BUF_POINTS_NUM 		256

#define ALINK_CLK_OUPUT_DISABLE 	0xFF

typedef enum {
    ALINK0 			= 0u,							//BR28只有一个ALNK模块
} ALINK_PORT;

//ch_num
typedef enum {
    ALINK_CH0		= 0u,
    ALINK_CH1,
    ALINK_CH2,
    ALINK_CH3,
} ALINK_CH;

//ch_dir
typedef enum {
    ALINK_DIR_TX	= 0u,
    ALINK_DIR_RX		,
} ALINK_DIR;

typedef enum {
    ALINK_LEN_16BIT = 0u,
    ALINK_LEN_24BIT		, //ALINK_FRAME_MODE需要选择: ALINK_FRAME_64SCLK
} ALINK_DATA_WIDTH;

//ch_mode
typedef enum {
    ALINK_MD_NONE	= 0u,
    ALINK_MD_IIS		,
    ALINK_MD_IIS_LALIGN	,
    ALINK_MD_IIS_RALIGN	,
    ALINK_MD_DSP0		,
    ALINK_MD_DSP1		,
} ALINK_MODE;

//ch_mode
typedef enum {
    ALINK_ROLE_MASTER, //主机
    ALINK_ROLE_SLAVE,  //从机
} ALINK_ROLE;

typedef enum {
    ALINK_CLK_FALL_UPDATE_RAISE_SAMPLE, //下降沿更新数据, 上升沿采样数据
    ALINK_CLK_RAISE_UPDATE_FALL_SAMPLE, //上降沿更新数据, 下升沿采样数据
} ALINK_CLK_MODE;

typedef enum {
    ALINK_FRAME_64SCLK, 	//64 sclk/frame
    ALINK_FRAME_32SCLK, 	//32 sclk/frame
} ALINK_FRAME_MODE;

//SDK默认PLL是192M,仅支持44100,22050,11025采样率,如需其他采样率,需设置PLL为240M,可支持所有采样率
typedef enum {
    ALINK_SR_48000 = 48000,
    ALINK_SR_44100 = 44100,
    ALINK_SR_32000 = 32000,
    ALINK_SR_24000 = 24000,
    ALINK_SR_22050 = 22050,
    ALINK_SR_16000 = 16000,
    ALINK_SR_12000 = 12000,
    ALINK_SR_11025 = 11025,
    ALINK_SR_8000  = 8000,
} ALINK_SR;

typedef enum {
    ALINK_BUF_DUAL, 	//乒乓BUF
    ALINK_BUF_CIRCLE,	//循环BUF
} ALINK_BUF_MODE;

struct alnk_hw_ch {
    ALINK_PORT	module;
    ALINK_CH	ch_idx;
    u8 data_io;					//data IO配置
    ALINK_DIR dir; 				//通道传输数据方向: Tx, Rx
    void *buf;					//dma buf地址
    void (*isr_cb)(void *priv, void *addr, int len);	//中断回调
    void *private_data;			//音频私有数据
};

//===================================//
//多个通道使用需要注意:
//1.数据位宽需要保持一致
//2.buf长度相同
//===================================//
typedef struct _ALINK_PARM {
    ALINK_PORT	module;
    u8 mclk_io; 				//mclk IO输出配置: ALINK_CLK_OUPUT_DISABLE不输出该时钟
    u8 sclk_io;					//sclk IO输出配置: ALINK_CLK_OUPUT_DISABLE不输出该时钟
    u8 lrclk_io;				//lrclk IO输出配置: ALINK_CLK_OUPUT_DISABLE不输出该时钟
    struct alnk_hw_ch ch_cfg[4];		//通道内部配置
    ALINK_MODE mode; 					//IIS, left, right, dsp0, dsp1
    ALINK_ROLE role; 			//主机/从机
    ALINK_CLK_MODE clk_mode; 			//更新和采样边沿
    ALINK_DATA_WIDTH  bitwide;   //数据位宽16/32bit
    ALINK_FRAME_MODE sclk_per_frame;  	//32/64 sclk/frame
    u16 dma_len; 						//buf长度: byte
    u16 iperiod;                        //输入中断的周期点数
    ALINK_SR sample_rate;					//采样
    ALINK_BUF_MODE 	buf_mode;  	//乒乓buf or 循环buf率
} ALINK_PARM;

//iis 模块相关
void *alink_init(void *hw_alink);  //iis 初始化
int alink_start(void *hw_alink);             //iis 开启
int alink_set_sr(void *hw_alink, u32 sr); 			//iis 设置采样率
int alink_get_sr(void *hw_alink); 				//iis 获取采样率
u32 alink_get_dma_len(void *hw_alink); 				//iis 获取DMA_LEN
void alink_set_rx_pns(void *hw_alink, u32 len);		//iis 设置接收PNS
void alink_set_tx_pns(void *hw_alink, u32 len);		//iis 设置发送PNS
void alink_uninit(void *hw_alink); 			//iis 退出
int alink_get_tx_pns(void *hw_alink);

//iis 通道相关
void *alink_channel_init(void *hw_alink, ALINK_CH ch_idx, u8 dir, void *priv, void (*handle)(void *priv, void *addr, int len));			//iis通道初始化，返回句柄
void alink_channel_close(void *hw_channel);	//iis通道关闭
u32 alink_get_addr(void *hw_channel);			//iis获取通道DMA地址
u32 alink_get_shn(void *hw_channel);			//iis获取通道SHN
void alink_set_shn(void *hw_channel, u32 len);	//iis设置通道SHN
u32 alink_get_swptr(void *hw_channel);			//iis获取通道swptr
void alink_set_swptr(void *hw_channel, u32 value);		//iis设置通道swptr
u32 alink_get_hwptr(void *hw_channel);			//iis获取通道hwptr
void alink_set_hwptr(void *hw_channel, u32 value);	//iis设置通道hwptr
void alink_set_ch_ie(void *hw_channel, u32 value);	//iis设置通道ie
void alink_clr_ch_pnd(void *hw_channel);			//iis清除通道pnd

u32 audio_iis_hw_rates_match(u32 sr);
#endif