#ifndef _COMMPROC_DMS_H_ #define _COMMPROC_DMS_H_ #include "generic/typedef.h" #include "cvp_common.h" /*agc类型定义*/ #define AGC_EXTERNAL 0 #define AGC_INTERNAL 1 //tms_cfg: typedef struct { u8 ver; //Ver:01 u8 mic_again; //MIC增益,default:3(0~14) u8 fb_mic_again; //FB MIC增益,default:3(0~14) u8 dac_again; //DAC增益,default:22(0~31) u8 talk_mic_ch; //主MIC通道选择 u8 talk_ref_mic_ch; //副MIC通道选择 u8 talk_fb_mic_ch; //FB通道选择 u8 enable_module; //使能模块 u8 ul_eq_en; //上行EQ使能,default:enable(disable(0), enable(1)) u8 agc_type; union { /*AGC*/ struct { float ndt_fade_in; //单端讲话淡入步进default: 1.3f(0.1 ~ 5 dB) float ndt_fade_out; //单端讲话淡出步进default: 0.7f(0.1 ~ 5 dB) float dt_fade_in; //双端讲话淡入步进default: 1.3f(0.1 ~ 5 dB) float dt_fade_out; //双端讲话淡出步进default: 0.7f(0.1 ~ 5 dB) float ndt_max_gain; //单端讲话放大上限,default: 12.f(0 ~ 24 dB) float ndt_min_gain; //单端讲话放大下限,default: 0.f(-20 ~ 24 dB) float ndt_speech_thr; //单端讲话放大阈值,default: -50.f(-70 ~ -40 dB) float dt_max_gain; //双端讲话放大上限,default: 12.f(0 ~ 24 dB) float dt_min_gain; //双端讲话放大下限,default: 0.f(-20 ~ 24 dB) float dt_speech_thr; //双端讲话放大阈值,default: -40.f(-70 ~ -40 dB) float echo_present_thr; //单端双端讲话阈值,default:-70.f(-70 ~ -40 dB) } agc_ext; /*JLSP AGC*/ struct { int min_mag_db_level; int max_mag_db_level; int addition_mag_db_level; int clip_mag_db_level; int floor_mag_db_level; } agc_int; } agc; /*aec*/ int aec_process_maxfrequency; //default:8000,range[3000:8000] int aec_process_minfrequency; //default:0,range[0:1000] int af_length; //default:128 range[128:256] /*nlp*/ int nlp_process_maxfrequency; //default:8000,range[3000:8000] int nlp_process_minfrequency; //default:0,range[0:1000] float overdrive; //default:1,range[0:30] /*ans*/ float aggressfactor; //default:1.25,range[1:2] float minsuppress; //default:0.04,range[0.01:0.1] float init_noise_lvl; //default:-75dB,range[-100:-30] /*enc*/ int enc_process_maxfreq; //default:8000,range[3000:8000] int enc_process_minfreq; //default:0,range[0:1000] int sir_maxfreq; //default:3000,range[1000:8000] float mic_distance; //default:0.015,range[0.035:0.015] float target_signal_degradation;//default:1,range[0:1] float enc_aggressfactor; //default:1.f,range[0:4] float enc_minsuppress; //default:0.09f,range[0:0.1] float Tri_SnrThreshold0; //sir设定阈值 float Tri_SnrThreshold1; //sir设定阈值 float Tri_CompenDb; //mic增益补偿 /*wn*/ float wn_msc_th; //双麦非相关性阈值,default:0.6f(0 ~ 1) float ms_th; //麦增益能量阈值, default:80.f(0-255)dB int wn_gain_offset; //风噪能量增益偏移阈值 } _GNU_PACKED_ AEC_TMS_CONFIG; struct tms_attr { u8 ul_eq_en: 1; u8 wideband: 1; u8 wn_en: 1; u8 dly_est : 1; u8 aptfilt_only: 1; u8 reserved: 3; u8 dst_delay;/*延时估计目标延时*/ u8 EnableBit; u8 FB_EnableBit; u8 packet_dump; u8 SimplexTail; u8 output_sel;/*dms output选择*/ u16 hw_delay_offset;/*dac hardware delay offset*/ u16 wn_gain;/*white_noise gain*/ u8 agc_type; /*agc类型*/ /*AGC*/ float AGC_NDT_fade_in_step; //in dB float AGC_NDT_fade_out_step; //in dB float AGC_NDT_max_gain; //in dB float AGC_NDT_min_gain; //in dB float AGC_NDT_speech_thr; //in dB float AGC_DT_fade_in_step; //in dB float AGC_DT_fade_out_step; //in dB float AGC_DT_max_gain; //in dB float AGC_DT_min_gain; //in dB float AGC_DT_speech_thr; //in dB float AGC_echo_present_thr; //In dB int AGC_echo_look_ahead; //in ms int AGC_echo_hold; // in ms /*jlsp agc*/ int min_mag_db_level; int max_mag_db_level; int addition_mag_db_level; int clip_mag_db_level; int floor_mag_db_level; /*AEC*/ int aec_process_maxfrequency; //default:8000,range[3000:8000] int aec_process_minfrequency; //default:0,range[0:1000] int af_length; //default:128 range[128:256] /*NLP*/ int nlp_process_maxfrequency; //default:8000,range[3000:8000] int nlp_process_minfrequency; //default:0,range[0:1000] float overdrive; //default:1,range[0:30] /*ANS*/ float aggressfactor; //default:1.25,range[1:2] float minsuppress; //default:0.04,range[0.01:0.1] float init_noise_lvl; //default:-75db,range[-100:-30] /*DNS Parameters*/ float DNS_highGain; //EQ强度 range[1.0:3.5] float DNS_rbRate; //混响强度 range[0:0.9]; int enhance_flag; //是否高频增强 range[0,1] /*ENC*/ int Tri_CutTh; //fb麦统计截止频率 float Tri_SnrThreshold0; //sir设定阈值 float Tri_SnrThreshold1; //sir设定阈值 float *Tri_TransferFunc; //fb -> main传递函数 float Tri_FbCompenDb; //fb补偿增益 int Tri_TfEqSel; //eq,传递函数的选择：0选择eq，1选择传递函数，2选择传递函数和eq int enc_process_maxfreq; //default:8000,range[3000:8000] int enc_process_minfreq; //default:0,range[0:1000] int sir_maxfreq; //default:3000,range[1000:8000] float mic_distance; //default:0.015,range[0.035:0.015] float target_signal_degradation;//default:1,range[0:1] float enc_aggressfactor; //default:4.f,range[0:4] float enc_minsuppress; //default:0.09f,range[0:0.1] float Tri_CompenDb; //mic增益补偿, dB int Tri_Bf_Enhance; //bf是否高频增强 /*wn*/ float wn_msc_th; //双麦非相关性阈值,default:0.6f(0 ~ 1) float ms_th; //麦增益能量阈值, default:80.f(0-255)dB int wn_gain_offset; //风噪能量增益偏移阈值 /*common*/ float global_minsuppress; //default:0.0,range[0.0:0.09] /*data handle*/ int (*cvp_advanced_options)(void *aec, void *nlp, void *ns, void *enc, void *agc, void *wn, void *mfdt); int (*aec_probe)(short *mic0, short *mic2, short *mic3, short *ref, u16 len); int (*aec_post)(s16 *dat, u16 len); int (*aec_update)(u8 EnableBit); int (*output_handle)(s16 *dat, u16 len); /*Extended-Parameters*/ u16 ref_sr; u16 ref_channel; /*参考数据声道数*/ u16 adc_ref_en; /*adc回采参考数据使能*/ }; s32 aec_tms_init(struct tms_attr *attr); s32 aec_tms_exit(); s32 aec_tms_fill_in_data(void *dat, u16 len); int aec_tms_fill_in_ref_data(void *dat, u16 len); int aec_tms_fill_in_ref_1_data(void *dat, u16 len); s32 aec_tms_fill_ref_data(void *dat, u16 len); void aec_tms_toggle(u8 toggle); int aec_tms_cfg_update(AEC_TMS_CONFIG *cfg); int aec_tms_reboot(u8 enablebit); int cvp_tms_read_ref_data(void); /* * 获取风噪检测信息 * wd_flag: 0 没有风噪，1 有风噪 * 风噪强度r: 0~BIT(16) * wd_lev: 风噪等级，0：弱风，1：中风，2：强风 * */ int jlsp_tms_get_wind_detect_info(int *wd_flag, int *wd_val, int *wd_lev); /*tri_en: 1 正常3MIC降噪 * 0 变成2MIC降噪，不使用 FB MIC数据*/ int jlsp_tms_mode_choose(u8 tri_en); #endif/*_COMMPROC_DMS_H_*/