测试：type A卡 读取代码没问题

apps/common/third_party_profile/Tecent_LL/tecent_protocol/ble_qiot_template.c

@@ -28,7 +28,7 @@ extern "C" {
 #include "gpio.h"
 
 static uint8_t LL_led = 0;
-#define LLSYNC_SWITCH_PIN IO_PORTA_01
+#define LLSYNC_SWITCH_PIN IO_PORTA_00
 static int ble_property_power_switch_set(const char *data, uint16_t len)
 {
     printf("ble_property_power_switch_set led to %d\n", data[0]);

apps/common/third_party_profile/jieli/wireless_mic/le_wireless_mic_client.c

@@ -1,3 +1,5 @@
+
+
 // *****************************************************************************
 /* EXAMPLE_START(le_counter): LE Peripheral - Heartbeat Counter over GATT
  *

apps/earphone/board/br28/board_jl701n_demo.c

@@ -496,7 +496,7 @@ const struct soft_iic_config soft_iic_cfg[] = {
         .scl = TCFG_SW_I2C0_CLK_PORT,                   //IIC CLK脚
         .sda = TCFG_SW_I2C0_DAT_PORT,                   //IIC DAT脚
         .delay = TCFG_SW_I2C0_DELAY_CNT,                //软件IIC延时参数，影响通讯时钟频率
-        .io_pu = 1,                                     //是否打开上拉电阻，如果外部电路没有焊接上拉电阻需要置1
+        .io_pu = 0,                                     //是否打开上拉电阻，如果外部电路没有焊接上拉电阻需要置1
     },
 #if 0
     //iic1 data

apps/earphone/board/br28/board_jl701n_demo_global_build_cfg.h

@@ -8,7 +8,7 @@
 
 /* Following Macros Affect Periods Of Both Code Compiling And Post-build */
 
-#define CONFIG_DOUBLE_BANK_ENABLE               1       //单双备份选择(若打开了改宏,FLASH结构变为双备份结构，适用于接入第三方协议的OTA， PS: JL-OTA同样支持双备份升级, 需要根据实际FLASH大小同时配置CONFIG_FLASH_SIZE)
+#define CONFIG_DOUBLE_BANK_ENABLE               0       //单双备份选择(若打开了改宏,FLASH结构变为双备份结构，适用于接入第三方协议的OTA， PS: JL-OTA同样支持双备份升级, 需要根据实际FLASH大小同时配置CONFIG_FLASH_SIZE)
 #define CONFIG_APP_OTA_ENABLE                   1       //是否支持RCSP升级(JL-OTA)
 
 #define CONFIG_UPDATE_JUMP_TO_MASK              0   	//配置升级到loader的方式0为直接reset,1为跳转(适用于芯片电源由IO口KEEP住的方案,需要注意检查跳转前是否将使用DMA的硬件模块全部关闭)

apps/earphone/earphone.c

@@ -20,7 +20,7 @@
 #include "pbg_user.h"
 #include "btstack/bluetooth.h"
 #include "colorful_lights/colorful_lights.h"
-
+#if 0
 #if TCFG_AUDIO_ANC_ENABLE
 #include "audio_anc.h"
 #endif/*TCFG_AUDIO_ANC_ENABLE*/
@@ -2792,3 +2792,4 @@ static int state_machine(struct application *app, enum app_state state, struct i
 //     .state  = APP_STA_DESTROY,
 // };
 
+#endif

apps/earphone/include/app_config.h

@@ -24,7 +24,7 @@
 #define    TRANS_DATA_EN             0
 #define    RCSP_BTMATE_EN            0
 #if BLE_WIRELESS_CLIENT_EN == 0
-#define    RCSP_ADV_EN               1  // lmx，打开这个，则作为ble从设备
+#define    RCSP_ADV_EN               1  
 #else
 #define    RCSP_ADV_EN               0
 #endif

apps/earphone/tone_table.c

@@ -169,6 +169,7 @@ static const struct sin_param *get_sine_param_by_index(u8 index, u8 *num)
 __BANK_TONE_ENTRY
 int tone_play_index(u8 index, u8 preemption)
 {
+    return 0; //xtell
     printf("tone_play_index:%d,preemption:%d", index, preemption);
     if (index >= IDEX_TONE_NONE) {
         return 0;
@@ -202,6 +203,7 @@ int tone_play_index_no_tws(u8 index, u8 preemption)
 /* __BANK_TONE_ENTRY */
 int tone_play_index_with_callback(u8 index, u8 preemption, void (*user_evt_handler)(void *priv), void *priv)
 {
+    return 0; //xtell
     printf("tone_play_index:%d,preemption:%d", index, preemption);
     if (index >= IDEX_TONE_NONE) {
         return 0;

apps/earphone/user_cfg.c

@@ -11,7 +11,7 @@
 #include "asm/pwm_led.h"
 #include "aec_user.h"
 #include "app_power_manage.h"
-
+#include "avctp_user.h"
 #define LOG_TAG_CONST       USER_CFG
 #define LOG_TAG             "[USER_CFG]"
 #define LOG_ERROR_ENABLE
@@ -581,5 +581,33 @@ int bt_modify_name(u8 *new_name)
     }
     return 0;
 }
+////////////////////////////////////////////////////////////////////////////////////////
+extern void lmp_hci_write_local_name(const char *name);
+int xtell_bt_newname(u8 *new_name){
+    u8 new_len = strlen(new_name);
+    if(new_len >= LOCAL_NAME_LEN){
+        new_name[LOCAL_NAME_LEN -1] = 0;
+    }
 
+    if(strcmp(new_name,bt_cfg.edr_name)){
+        user_send_cmd_prepare(USER_CTRL_DISCONNECTION_HCI, 0, NULL);        //断开此时经典蓝牙的连接，但经典蓝牙还是可以被发现
+        user_send_cmd_prepare(USER_CTRL_WRITE_SCAN_DISABLE, 0, NULL);       //关闭蓝牙可发现,已连接时不能操作
+        user_send_cmd_prepare(USER_CTRL_WRITE_CONN_DISABLE, 0, NULL);       //关闭蓝牙可连接
+        
+        syscfg_write(CFG_BT_NAME,new_name,LOCAL_NAME_LEN);
+        memcpy(bt_cfg.edr_name,new_name,LOCAL_NAME_LEN);
+        lmp_hci_write_local_name(bt_get_local_name());
+        printf("xtell set new name sucess\n");
+
+        delay_2ms(25);
+        bt_ble_init();
+        user_send_cmd_prepare(USER_CTRL_WRITE_SCAN_ENABLE, 0, NULL);                    //打开蓝牙可发现,已连接时不能操作
+        user_send_cmd_prepare(USER_CTRL_WRITE_CONN_ENABLE, 0, NULL);                    //打开蓝牙可连接
+        connect_last_device_from_vm();  
+        
+        return 1;
+    }
+    
+    return 0;
+}
 

apps/earphone/xtell_remote_control/RFID/include/READER_REG.h

@@ -94,6 +94,7 @@
 #define  REG_VERSION				 0x7F
 
 #define  CMD_MASK          	 0x1F
+// #define  CMD_MASK          	 0x0F
 
 #define     CMD_IDLE         0x00
 #define     CMD_LPCD     		 0x01 

apps/earphone/xtell_remote_control/RFID/reader/CPU_CARD.c

@@ -21,7 +21,7 @@ struct CPU_CARD_STR CPU_CARD;
 static unsigned char FM176XX_TPDU(transmission_struct *tpdu);
 
 /**
- * @brief CPU卡事件处理函数（示例）。
+ * @brief CPU卡事件处理函数。
  * @details
  *        1. 发送RATS (Request for Answer to Select) 命令以激活卡片并获取ATS (Answer to Select)。
  *        2. 解析ATS，获取卡片能力信息（如FSC, FWI等）。

apps/earphone/xtell_remote_control/RFID/reader/MIFARE.c

@@ -67,9 +67,9 @@ void Mifare_Clear_Crypto(void)
 }
 	
 /**
- * @brief Mifare卡事件处理函数（示例）。
+ * @brief Mifare卡事件处理函数。
  * @details
- *        这是一个示例函数，演示了对Mifare Classic卡进行读写操作的完整流程：
+ *        Mifare Classic卡进行读写操作的完整流程：
  *        1. 清除加密状态。
  *        2. 对指定的扇区（例如扇区1）使用密钥A进行认证。
  *        3. 如果认证成功，则遍历该扇区的数据块（块0到块2）。

apps/earphone/xtell_remote_control/RFID/reader/NTAG.c

@@ -19,9 +19,9 @@
 unsigned char PAGE_DATA[16];
 
 /**
- * @brief NTAG卡事件处理函数（示例）。
+ * @brief NTAG卡事件处理函数。
  * @details
- *        这是一个示例函数，演示了对NTAG系列卡片进行读写操作的流程：
+ *        对NTAG系列卡片进行读写操作的流程：
  *        1. 准备要写入的数据（4字节）。
  *        2. 调用 `Write_Page()` 函数将数据写入第8页。
  *        3. 调用 `Read_Page()` 函数从第8页读回数据并打印，以进行验证。

apps/earphone/xtell_remote_control/RFID/reader/READER.c

@@ -230,6 +230,7 @@ unsigned char ReaderV_Initial(void)
 {
     LoadProtocol(RX_TYPEV_26, RX_TYPEV_26);
     ModifyReg(REG_RXANA, MASK_RCV_GAIN | MASK_RCV_HPCF, FUN_DISABLE);
+    // ModifyReg(REG_RXANA,BIT3|BIT2|BIT1|BIT0, FUN_DISABLE);
     ModifyReg(REG_RXANA, (HPCF_V << 3) | GAIN_V, FUN_ENABLE);
     SetParity(FUN_DISABLE);
     SetReg(REG_TXAMP, AMPLITUDE_V);
@@ -590,7 +591,7 @@ unsigned char ReaderB_Get_SN(struct picc_b_struct *picc_b)
 
     return SUCCESS;
 }
-
+extern void debug_command(u8 index);
 /**
  * @brief   向Type V (ISO15693) 卡片发送Inventory命令。
  * @param   picc_v [out] 指向存储卡片信息的结构体。
@@ -599,8 +600,14 @@ unsigned char ReaderB_Get_SN(struct picc_b_struct *picc_b)
 unsigned char ReaderV_Inventory(struct picc_v_struct *picc_v)
 {
     unsigned char reg_data, i, result; // 新增 result 变量
-    SetCommand(CMD_IDLE);
+    unsigned char command = 0;
 
+    // debug_command(0);
+
+    SetCommand(CMD_IDLE);
+    //对于command，可以在发送第二条指令之前读取一次command寄存器判断是否回到idle再发送第二条,这里直接采用长延迟
+    rfid_delay_ms(100);
+    // debug_command(1);
 
     SetReg(REG_TXDATANUM, 0x08);
     ModifyReg(REG_FIFOCONTROL, BIT_FIFOFLUSH, FUN_ENABLE);
@@ -612,7 +619,8 @@ unsigned char ReaderV_Inventory(struct picc_v_struct *picc_v)
     ModifyReg(REG_RXCRCCON, BIT_CRCEN, FUN_ENABLE);
 
     SetCommand(CMD_TRANSCEIVE);
-    rfid_delay_ms(50);
+    // debug_command(2);
+    rfid_delay_ms(100);
 
     GetReg(REG_ERROR, &reg_data);
     if ((reg_data & 0x0F) != 0){
@@ -622,6 +630,7 @@ unsigned char ReaderV_Inventory(struct picc_v_struct *picc_v)
         
     GetReg(REG_FIFOLENGTH, &reg_data);
     if (reg_data != 10){
+        // debug_command(3);
         xlog("FIFO Length is %d, expected 10.\n", reg_data);
         return FAIL;
     }

apps/earphone/xtell_remote_control/RFID/rfid_event.c

@@ -82,8 +82,9 @@ void TYPE_A_EVENT(char* uid)
     }
     xlog("-> SAK = %02X\r\n", PICC_A.SAK[0]);
 
-    // 根据SAK值判断卡片类型
-    if (PICC_A.SAK[0] == 0x08)
+    // 根据SAK值判断卡片类型，并进行写入要存储的数据，目前客户使用的是mifare的卡
+    #if 0
+    if (PICC_A.SAK[0] == 0x08)  //
     {
         xlog("************* Mifare CARD ************* \r\n");
         result = MIFARE_CARD_EVENT();
@@ -98,6 +99,7 @@ void TYPE_A_EVENT(char* uid)
         xlog("************* NTAG CARD ************* \r\n");
         result = NTAG_EVENT();
     }
+    #endif
 
     SetCW(FUN_DISABLE); // 关闭RF场
 }

apps/earphone/xtell_remote_control/RFID/rfid_hal.c

@@ -52,6 +52,12 @@ unsigned char FM176XX_HardInit(void){
     #else
     int ret = soft_iic_init(0);
     #endif
+
+    //PowerDown脚，初始化要确保其是置为0
+    gpio_set_direction(IO_PORTC_04, 0);
+    gpio_write(IO_PORTC_04, 1);
+    mdelay(5);
+    gpio_write(IO_PORTC_04, 0);
     xlog("init iic result:%d\n", ret);  //返回0成功
 }
 
@@ -67,15 +73,18 @@ unsigned char GetReg(unsigned char address, unsigned char *reg_data){
     soft_iic_start(0);
     if (0 == soft_iic_tx_byte(0, FM176_WRITE_ADDR)) {
         soft_iic_stop(0);
+        xlog("GetReg: 【write】 addr write error:%x\n", FM176_WRITE_ADDR);
         return FAIL;
     }
     if (0 == soft_iic_tx_byte(0, address)) {
         soft_iic_stop(0);
+        xlog("GetReg: 【reg】 addr write error: %x\n", address);
         return FAIL;
     }
     soft_iic_start(0);
     if (0 == soft_iic_tx_byte(0, FM176_READ_ADDR)) {
         soft_iic_stop(0);
+        xlog("GetReg: 【read】 addr read error: %x\n", FM176_READ_ADDR);
         return FAIL;
     }
     *reg_data = soft_iic_rx_byte(0, 0);
@@ -96,14 +105,17 @@ unsigned char SetReg(unsigned char address, unsigned char reg_data){
     soft_iic_start(0);
     if (0 == soft_iic_tx_byte(0, FM176_WRITE_ADDR)) {
         soft_iic_stop(0);
+        xlog("SetReg: 【write】 addr write error: %x \n", FM176_WRITE_ADDR);
         return FAIL;
     }
     if (0 == soft_iic_tx_byte(0, address)) {
         soft_iic_stop(0);
+        xlog("SetReg: 【reg】 addr write error: %x\n", address);
         return FAIL;
     }
     if (0 == soft_iic_tx_byte(0, reg_data)) {
         soft_iic_stop(0);
+        xlog("SetReg: 【reg】 data write error\n");
         return FAIL;
     }
     soft_iic_stop(0);
@@ -118,6 +130,13 @@ unsigned char SetReg(unsigned char address, unsigned char reg_data){
  */
 unsigned char FM176XX_SoftReset(void){
     return SetReg(REG_COMMAND, 0x1F);
+
+    //
+    // gpio_set_direction(IO_PORTC_04, 0);
+    // gpio_write(IO_PORTC_04, 1);
+    // mdelay(5);
+    // gpio_write(IO_PORTC_04, 0);
+
 }
 
 #elif INTERFACE_TYPE == 1 //spi
@@ -216,5 +235,14 @@ unsigned char FM176XX_SoftReset(void){
 
 void rfid_delay_ms(unsigned int ms){
     // delay(ms);
-    os_time_dly(ms/10);
+    mdelay(ms);
 }
+
+
+void debug_command(u8 index){
+    unsigned char reg_data; 
+    unsigned char command = 0;
+    GetReg(REG_ERROR, &reg_data);
+    GetReg(REG_COMMAND, &command);
+    xlog("debug %d -- REG_ERROR = 0x%02X. command = 0x%02X\n",index, reg_data, command);
+}

apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.HIDE

@@ -0,0 +1,528 @@
+#include "system/includes.h"
+#include "media/includes.h"
+#include "tone_player.h"
+#include "earphone.h"
+
+#include "app_config.h"
+#include "app_action.h"
+#include "app_task.h"
+
+#include "btstack/avctp_user.h"
+#include "btstack/btstack_task.h"
+#include "btctrler/btctrler_task.h"
+#include "btstack/frame_queque.h"
+#include "user_cfg.h"
+// #include "aec_user.h"
+#include "classic/hci_lmp.h"
+#include "bt_common.h"
+#include "bt_ble.h"
+#include "bt_tws.h"
+#include "pbg_user.h"
+#include "btstack/bluetooth.h"
+#include "colorful_lights/colorful_lights.h"
+
+#include "app_chargestore.h"
+#include "jl_kws/jl_kws_api.h"
+
+#include "asm/charge.h"
+#include "app_charge.h"
+#include "ui_manage.h"
+
+#include "app_chargestore.h"
+#include "app_umidigi_chargestore.h"
+#include "app_testbox.h"
+#include "app_online_cfg.h"
+#include "app_main.h"
+#include "app_power_manage.h"
+#include "gSensor/gSensor_manage.h"
+#include "key_event_deal.h"
+#include "classic/tws_api.h"
+#include "asm/pwm_led.h"
+#include "ir_sensor/ir_manage.h"
+#include "in_ear_detect/in_ear_manage.h"
+#include "vol_sync.h"
+#include "bt_background.h"
+#include "default_event_handler.h"
+#include "debug.h"
+#include "system/event.h"
+#include "../nvs/nvs.h"
+#if (JL_EARPHONE_APP_EN)
+#include "rcsp_adv_bluetooth.h"
+#endif
+///////////////////////////////////////////////////////////////////////////////////////////////////
+//宏定义
+#define LOG_TAG_CONST       EARPHONE
+#define LOG_TAG             "[EARPHONE]"
+#define LOG_ERROR_ENABLE
+#define LOG_DEBUG_ENABLE
+#define xlog_ENABLE
+
+
+#if(USE_DMA_UART_TEST) //使用dm串口测试时不能同时打开
+#define MY_SNIFF_EN                   0
+#else
+#define MY_SNIFF_EN                   1 //默认打开
+#endif
+
+#define ENABLE_XLOG 1
+#ifdef xlog
+#undef xlog
+#endif
+#if ENABLE_XLOG
+    #define xlog(format, ...) printf("[XT:%s] " format, __func__, ##__VA_ARGS__)
+#else
+    #define xlog(format, ...) ((void)0)
+#endif
+//
+///////////////////////////////////////////////////////////////////////////////////////////////////
+
+///////////////////////////////////////////////////////////////////////////////////////////////////
+//变量
+extern u8 init_ok;
+extern u8 sniff_out;
+unsigned char xtell_bl_state=0;   //存放经典蓝牙的连接状态，0断开，1是连接
+u8 bt_newname =0;
+unsigned char xt_ble_new_name[9] = "tws";
+static u16 play_poweron_ok_timer_id = 0;
+
+// -- 初始化标志位 --
+u8 SC7U22_init = 0x10;     //六轴是否初始化
+u8 MMC5603nj_init = 0x20;  //地磁是否初始化
+u8 BMP280_init = 0x30;   //气压计初始化
+// -- 线程id --
+u16 SC7U22_calibration_id;
+u16 start_collect_fuc_id;
+u16 BLE_send_fuc_id;
+u16 rfid_fuc_id;
+//
+///////////////////////////////////////////////////////////////////////////////////////////////////
+extern int bt_hci_event_handler(struct bt_event *bt);
+extern void SC7U22_static_calibration(void);
+extern void create_process(u16* pid, const char* name, void *priv, void (*func)(void *priv), u32 msec);
+extern void close_process(u16* pid,char* name);
+extern void start_collect_fuc(void);
+extern void BLE_send_fuc(void);
+extern void xtell_ble_central_test_start(void);
+///////////////////////////////////////////////////////////////////////////////////////////////////
+/*
+ * 模式状态机, 通过start_app()控制状态切换
+ */
+/* extern int audio_mic_init(); */
+
+static int state_machine(struct application *app, enum app_state state, struct intent *it){
+     int error = 0;
+    static u8 tone_player_err = 0;
+    xlog("bt_state_machine=%d\n", state);
+    switch (state) {
+    case APP_STA_CREATE:
+        xlog("APP_STA_CREATE\n");
+        /* set_adjust_conn_dac_check(0); */
+
+        break;
+    case APP_STA_START:
+        xlog("APP_STA_START\n");
+        if (!it) {
+            xlog("APP_STA_START:it none\n");
+            break;
+        }
+        switch (it->action) {
+        case ACTION_EARPHONE_MAIN:
+            xlog("ble init\n");
+            /*
+             * handler 初始化
+             */
+            clk_set("sys", BT_NORMAL_HZ);
+            u32 sys_clk =  clk_get("sys");
+            bt_pll_para(TCFG_CLOCK_OSC_HZ, sys_clk, 0, 0);
+            /* bredr_set_dut_enble(1, 1); */
+            bt_function_select_init();
+            bredr_handle_register();
+            EARPHONE_STATE_INIT();
+            btstack_init();
+            sys_auto_shut_down_enable();
+            bt_sniff_feature_init();
+            sys_auto_sniff_controle(MY_SNIFF_EN, NULL);
+            app_var.dev_volume = -1;    
+            break;
+        case ACTION_A2DP_START:  //蓝牙音频传输协议
+            xlog("ACTION_A2DP_START\n");
+            break;
+        case ACTION_BY_KEY_MODE:
+            xlog("ACTION_BY_KEY_MODE\n");
+            break;
+        case ACTION_TONE_PLAY:
+            xlog("ACTION_TONE_PLAY\n");
+            // STATUS *p_tone = get_tone_config();
+            // tone_play_index(p_tone->bt_init_ok, 1);
+            break;
+        case ACTION_DO_NOTHING:
+            xlog("ACTION_DO_NOTHING\n");
+            break;
+        }
+        break;
+    case APP_STA_PAUSE:
+        xlog("APP_STA_PAUSE\n");
+        break;
+    case APP_STA_RESUME:
+        xlog("APP_STA_RESUME\n");
+        //恢复前台运行
+        sys_auto_shut_down_disable();
+        sys_key_event_enable();
+        break;
+    case APP_STA_STOP:
+        xlog("APP_STA_STOP\n");
+        break;
+    case APP_STA_DESTROY:
+        xlog("APP_STA_DESTROY\n");
+        r_printf("APP_STA_DESTROY\n");
+        if (!app_var.goto_poweroff_flag) {
+            bt_app_exit(NULL);
+        }
+        break;
+    }
+    xlog("state machine error\n");
+    return error;
+}
+
+///////////////////////////////////////////////////////////////////////////////////////////////////
+//handle
+
+
+void le_user_app_send_event(size_t command, unsigned char* data, size_t size)
+{
+    // 中断->事件
+    static unsigned char buffer[512];
+    if(data && size && size <= sizeof(buffer)) {
+        // 拷贝到缓存，避免转发事件的时候，地址发送改变。
+        memcpy(buffer, data, size);
+        struct sys_event event;
+        event.type = SYS_APP_USER_EVENT;
+        event.u.app.command = command;
+        event.u.app.buffer = buffer;
+        event.u.app.size = size;
+        sys_event_notify(&event);
+    }
+}
+
+void le_user_app_event_handler(struct sys_event* event){
+
+    switch (event->type) {
+        // 打印接收到的数据
+        printf("BLE data\n");
+        put_buf(event->u.app.buffer, event->u.app.size);
+        case SYS_APP_USER_EVENT:
+            if (event->u.app.buffer[0] == 0xBE && event->u.app.buffer[1] == 0xBB) {
+                if(event->u.app.buffer[2] == 0x01){      //后面的数据长度 1
+                    switch (event->u.app.buffer[3]){
+                        case 0x01:
+                            nvs_test_factory_info();
+                            break;
+                        case 0x02:
+                            // factory_info_t read_info;;
+                            // nvs_read_factory_info(&read_info);
+                            extern void rfid_task_fuc(void);
+                            create_process(&rfid_fuc_id,"rfid",NULL,rfid_task_fuc,2000);
+                            break;
+                        case 0xff:  //测试
+                            int ret = hw_iic_init(0);
+                            // int ret = soft_iic_init(0);
+                            xlog("init iic result:%d\n", ret);  //返回0成功
+                            extern void i2c_scanner_probe(void);
+                            i2c_scanner_probe();
+                            
+                            break;
+                        default:
+                            break;
+                    }
+                }else if(event->u.app.buffer[2] == 0x02){  //后面数据长度为2
+                    switch (event->u.app.buffer[3]){  //数据包类型
+                        case 0x00: 
+                            break;
+                    }
+                }
+            }
+            break;
+
+        default:
+            xlog("%d\n",event->type);
+            break;
+    }
+
+
+}
+
+
+static void play_poweron_ok_timer(void *priv)
+{
+    app_var.wait_timer_do = 0;
+
+    log_d("\n-------play_poweron_ok_timer-------\n", priv);
+    if (is_dac_power_off()) {
+#if TCFG_USER_TWS_ENABLE
+        bt_tws_poweron();
+#else
+        bt_wait_connect_and_phone_connect_switch(0);
+#endif
+        return;
+    }
+
+    app_var.wait_timer_do = sys_timeout_add(priv, play_poweron_ok_timer, 100);
+}
+
+static void play_bt_connect_dly(void *priv)
+{
+    app_var.wait_timer_do = 0;
+
+    log_d("\n-------play_bt_connect_dly-------\n", priv);
+
+    if (!app_var.goto_poweroff_flag) {
+        STATUS *p_tone = get_tone_config();
+        tone_play_index(p_tone->bt_connect_ok, 1);
+    }
+}
+
+
+
+static int bt_connction_status_event_handler(struct bt_event *bt)
+{
+    STATUS *p_tone = get_tone_config();
+    u8 *phone_number = NULL;
+
+    switch (bt->event) {
+    case BT_STATUS_INIT_OK:
+        /*
+         * 蓝牙初始化完成
+         */
+        xlog("BT_STATUS_INIT_OK\n");
+        init_ok = 1;
+        __set_sbc_cap_bitpool(38);
+
+#if (TCFG_USER_BLE_ENABLE)
+        if (BT_MODE_IS(BT_BQB)) {
+            ble_bqb_test_thread_init();
+        } else {
+#if !TCFG_WIRELESS_MIC_ENABLE
+            bt_ble_init(); // lmx，初始化完，初始化ble，决定ble是作为主设备还是从设备
+            // xtell_ble_central_test_start(); //xtell
+#endif
+        }
+#endif
+        bt_init_ok_search_index();
+#if TCFG_TEST_BOX_ENABLE
+        testbox_set_bt_init_ok(1);
+#endif
+
+#if ((CONFIG_BT_MODE == BT_BQB)||(CONFIG_BT_MODE == BT_PER))
+        bt_wait_phone_connect_control(1);
+#else
+        if (is_dac_power_off()) {
+            bt_wait_connect_and_phone_connect_switch(0);
+        } else {
+            app_var.wait_timer_do = sys_timeout_add(NULL, play_poweron_ok_timer, 100);
+        }
+#endif
+
+        /*if (app_var.play_poweron_tone) {
+            tone_play_index(p_tone->power_on, 1);
+        }*/
+        break;
+
+    case BT_STATUS_SECOND_CONNECTED:
+        clear_current_poweron_memory_search_index(0);
+    case BT_STATUS_FIRST_CONNECTED:
+        xlog("BT_STATUS_CONNECTED\n");
+        xtell_bl_state = 1;                 //蓝牙连接成功 置1 
+        if(strcmp(xt_ble_new_name,"CM-11111") != 0){
+            //蓝牙连接成功
+            bt_newname =1;
+            u8 temp[5]={0xBB,0xBE,0x02,0x04,0x00};
+            temp[4] = xtell_bl_state;       //经典蓝牙连接状态
+            // send_data_to_ble_client(&temp,5); 
+        }
+        earphone_change_pwr_mode(PWR_DCDC15, 3000);
+        sys_auto_shut_down_disable();
+
+        ui_update_status(STATUS_BT_CONN);    //单台在此处设置连接状态,对耳的连接状态需要同步，在bt_tws.c中去设置
+
+        /* tone_play(TONE_CONN); */
+        /*os_time_dly(40); // for test*/
+        xlog("tone status:%d\n", tone_get_status());
+        if (get_call_status() == BT_CALL_HANGUP) {
+            if (app_var.phone_dly_discon_time) {
+                sys_timeout_del(app_var.phone_dly_discon_time);
+                app_var.phone_dly_discon_time = 0;
+            } else {
+                app_var.wait_timer_do = sys_timeout_add(NULL, play_bt_connect_dly, 1600);
+                /* tone_play_index(p_tone->bt_connect_ok, 1); */
+            }
+        }
+
+
+        /*int timeout = 5000 + rand32() % 10000;
+        sys_timeout_add(NULL, connect_phone_test,  timeout);*/
+        break;
+    case BT_STATUS_FIRST_DISCONNECT:
+    case BT_STATUS_SECOND_DISCONNECT:
+        xlog("BT_STATUS_DISCONNECT\n");
+        xtell_bl_state = 0;         //断开蓝牙 清0
+        //蓝牙断开连接                        
+        if(bt_newname){     //已经改成新蓝牙名字，断开才播报
+            bt_newname=0;
+            u8 temp[5]={0xBB,0xBE,0x02,0x04,0x00};
+            temp[4] = xtell_bl_state;       //经典蓝牙连接状态
+            // send_data_to_ble_client(&temp,5);
+        }
+        if (app_var.goto_poweroff_flag) {
+            /*关机不播断开提示音*/
+            /*关机时不改UI*/
+            break;
+        }
+        // bt_discon_dly_handle(NULL);
+        break;
+
+    //phone status deal
+    case BT_STATUS_PHONE_INCOME:
+        break;
+    case BT_STATUS_PHONE_OUT:
+        
+        break;
+    case BT_STATUS_PHONE_ACTIVE:
+        break;
+    case BT_STATUS_PHONE_HANGUP:
+        break;
+    case BT_STATUS_PHONE_NUMBER:
+        break;
+    case BT_STATUS_INBAND_RINGTONE: //铃声
+        break;
+    case BT_STATUS_CALL_VOL_CHANGE:
+
+        break;
+    case BT_STATUS_SNIFF_STATE_UPDATE:
+        xlog(" BT_STATUS_SNIFF_STATE_UPDATE %d\n", bt->value);    //0退出SNIFF
+        if (bt->value == 0) {
+            sniff_out = 1;
+            sys_auto_sniff_controle(MY_SNIFF_EN, bt->args);
+        } else {
+            sys_auto_sniff_controle(0, bt->args);
+        }
+        break;
+
+    case BT_STATUS_LAST_CALL_TYPE_CHANGE:
+        break;
+
+    case BT_STATUS_CONN_A2DP_CH:
+    case BT_STATUS_CONN_HFP_CH:
+
+        if ((!is_1t2_connection()) && (get_current_poweron_memory_search_index(NULL))) { //回连下一个device
+            if (get_esco_coder_busy_flag()) {
+                clear_current_poweron_memory_search_index(0);
+            } else {
+                user_send_cmd_prepare(USER_CTRL_START_CONNECTION, 0, NULL);
+            }
+        }
+        break;
+    case BT_STATUS_PHONE_MANUFACTURER:
+        break;
+    case BT_STATUS_VOICE_RECOGNITION:
+
+        break;
+    case BT_STATUS_AVRCP_INCOME_OPID:
+        xlog("BT_STATUS_AVRCP_INCOME_OPID:%d\n", bt->value);
+        break;
+    default:
+        xlog(" BT STATUS DEFAULT\n");
+        break;
+    }
+    return 0;
+}
+
+
+static int event_handler(struct application *app, struct sys_event *event)
+{
+
+    le_user_app_event_handler(event);
+
+    if (SYS_EVENT_REMAP(event)) {
+        g_printf("****SYS_EVENT_REMAP**** \n");
+        return 0;
+    }
+
+    switch (event->type) {
+    case SYS_KEY_EVENT:
+        break;
+    case SYS_BT_EVENT:
+        /*
+         * 蓝牙事件处理
+         */
+        if ((u32)event->arg == SYS_BT_EVENT_TYPE_CON_STATUS) {
+            printf("in event_handler:bt_connction_status_event_handler");
+            bt_connction_status_event_handler(&event->u.bt);
+        } else if ((u32)event->arg == SYS_BT_EVENT_TYPE_HCI_STATUS) {
+            bt_hci_event_handler(&event->u.bt);
+        }
+        break;
+    case SYS_DEVICE_EVENT:
+        /*
+         * 系统设备事件处理
+         */
+        if ((u32)event->arg == DEVICE_EVENT_FROM_CHARGE) {
+
+        } else if ((u32)event->arg == DEVICE_EVENT_FROM_POWER) {
+            return app_power_event_handler(&event->u.dev);
+        }
+#if (JL_EARPHONE_APP_EN)
+        else if ((u32)event->arg == DEVICE_EVENT_FROM_RCSP) {
+            xlog("DEVICE_EVENT_FROM_RCSP: %d", event->u.rcsp.event);
+            switch (event->u.rcsp.event) {
+            case MSG_JL_UPDATE_START:
+                xlog(">>> Xtell APP: MSG_JL_UPDATE_START\n");
+                // You can add UI notifications here, like LED blinking or a tone.
+                break;
+            default:
+                break;
+            }
+        }
+#endif
+#if TCFG_UMIDIGI_BOX_ENABLE
+        else if ((u32)event->arg == DEVICE_EVENT_UMIDIGI_CHARGE_STORE) {
+            app_umidigi_chargestore_event_handler(&event->u.umidigi_chargestore);
+        }
+#endif
+#if TCFG_TEST_BOX_ENABLE
+        else if ((u32)event->arg == DEVICE_EVENT_TEST_BOX) {
+            app_testbox_event_handler(&event->u.testbox);
+        }
+#endif
+        break;
+
+    default:
+        return false;
+    }
+
+    SYS_EVENT_HANDLER_SPECIFIC(event);
+#ifdef CONFIG_BT_BACKGROUND_ENABLE
+    if (app) {
+        default_event_handler(event);
+    }
+#endif
+    return false;
+
+}
+
+///////////////////////////////////////////////////////////////////////////////////////////////////
+
+static const struct application_operation app_handler_ops = {
+    .state_machine  = state_machine,
+    .event_handler 	= event_handler,
+};
+
+
+/*
+ * 注册earphone模式
+ */
+REGISTER_APPLICATION(app_handler) = {
+    .name = "handler",
+    .action = ACTION_EARPHONE_MAIN,
+    .ops = &app_handler_ops,
+    .state  = APP_STA_DESTROY,
+};

apps/earphone/xtell_remote_control/ble_handler/ble_test.c

@@ -6,6 +6,11 @@
 #include "le_common.h"
 #include "ble_user.h"
 
+
+
+
+
+
 #if 0 //ENABLE_THIS_TEST
 
 #define LOG_TAG_CONST       EARPHONE

apps/earphone/xtell_remote_control/ble_handler/client_handler.h

@@ -49,4 +49,12 @@ extern void g_ble_connect_new_device(char* name);
  * @return   //0:连接断开； 1：连接成功
  */
 extern u8 g_ble_get_state(void);
+
+/**
+ * @brief 发送数据给server
+ * 
+ * @param data 
+ * @param length 
+ */
+void g_send_data_to_ble_server(const u8* data, u16 length);
 #endif

apps/earphone/xtell_remote_control/pwm_test.c

@@ -0,0 +1,89 @@
+#include "asm/mcpwm.h"
+#include "asm/gpio.h"
+#include "task_func.h"
+#include "./nvs/nvs.h"
+#include "timer.h"
+#include "system/includes.h"
+#include "user_cfg.h"
+#include "earphone.h" // 宏定义 EARPHONE_STATE_...
+#include "ble_user.h"
+#include "le_client_demo.h"
+#include "le_common.h"
+#include "./ble_handler/client_handler.h"
+#include "./RFID/include/rfid_main.h"
+#include "./RFID/include/READER_REG.h"
+/*
+ * PWM配置参数:
+ * - 周期: 50ms (20Hz)
+ * - 最小脉宽: 500us (1%占空比)
+ * - 最大脉宽: 2.5ms (5%占空比)
+ * - PWM引脚: PA1 (IO_PORTA_01)
+ */
+
+void pwm_test_init(void)
+{
+    struct pwm_platform_data pwm_data = {0};
+    
+    // 配置PWM参数
+    pwm_data.pwm_aligned_mode = pwm_edge_aligned;  // 边沿对齐模式
+    pwm_data.pwm_ch_num = pwm_ch0;                 // 使用PWM通道0
+    pwm_data.frequency = 50;                       // 20Hz (周期50ms)
+    pwm_data.duty = 100;                           // 初始占空比1% (500us/50ms = 1%)
+    pwm_data.h_pin = IO_PORTA_01;                  // PWM输出引脚PA1
+    pwm_data.l_pin = -1;                           // 不使用互补引脚
+    pwm_data.complementary_en = 0;                 // 非互补模式
+    
+    // 初始化PWM
+    mcpwm_init(&pwm_data);
+    
+    // 启用PWM通道
+    mcpwm_open(pwm_ch0);
+}
+
+// 设置PWM占空比 (脉宽范围: 500us-2.5ms)
+void pwm_test_set_pulse_width_us(u32 pulse_width_us)
+{
+    u16 duty;
+    
+    // 限制脉宽范围: 500us - 2500us
+    if (pulse_width_us < 500) {
+        pulse_width_us = 500;
+    } else if (pulse_width_us > 2500) {
+        pulse_width_us = 2500;
+    }
+    
+    // 计算占空比: (脉宽/周期) * 10000
+    // 周期20ms = 20000us
+    duty = (pulse_width_us * 10000) / 20000;
+    
+    // 设置占空比
+    mcpwm_set_duty(pwm_ch0, duty);
+}
+
+// 测试函数: 从最小脉宽到最大脉宽循环变化
+void pwm_test_sweep(void)
+{
+    u32 pulse_width;
+    
+    pwm_test_set_pulse_width_us(500);
+    mdelay(1000);
+    pwm_test_set_pulse_width_us(2500);
+    mdelay(50);
+    
+}
+
+// 主测试函数
+void pwm_test_main(void)
+{
+    // 初始化PWM
+    pwm_test_init();
+    
+    // 设置最小脉宽500us
+    pwm_test_set_pulse_width_us(500);
+    
+    // 运行脉宽扫描测试
+    while (1) {
+        pwm_test_sweep();
+        os_time_dly(100);
+    }
+}

apps/earphone/xtell_remote_control/task_func.c

@@ -8,9 +8,11 @@
 #include "le_client_demo.h"
 #include "le_common.h"
 #include "./ble_handler/client_handler.h"
-// =================================================================================
+#include "./RFID/include/rfid_main.h"
+#include "./RFID/include/READER_REG.h"
+// ==================================================================================================================================================================
 // 宏定义与日志
-// =================================================================================
+// ==================================================================================================================================================================
 
 #define RC_LOG_ENABLE 1
 #if RC_LOG_ENABLE
@@ -19,14 +21,14 @@
 #define rc_log(format, ...)
 #endif
 
-// =================================================================================
+// ==================================================================================================================================================================
 // 外部函数声明 
-// =================================================================================
+// ==================================================================================================================================================================
 extern void TYPE_V_EVENT(char* uid);
 extern void TYPE_A_EVENT(char* uid);
-// =================================================================================
+// ==================================================================================================================================================================
 // 静态函数声明
-// =================================================================================
+// ==================================================================================================================================================================
 
 static RFID_Device_Type_t get_rfid_device_type(const u8* uid);
 
@@ -35,9 +37,15 @@ static void rc_ble_state_set_connecting(void);
 static void rc_ble_state_set_connected(void);
 static void rc_ble_state_set_disconnected(void);
 
-// =================================================================================
+//进程名称
+static char control_key_task_name[] = "control_key";
+
+//进程运行中标志
+static u8 key_detect_sign = 0; //为1表示正在运行
+
+// ==================================================================================================================================================================
 // 全局变量
-// =================================================================================
+// ==================================================================================================================================================================
 
 static RC_Context_t g_rc_context; // 全局上下文实例
 static u16 g_rfid_timer_id = 0;   // RFID 定时器ID
@@ -46,9 +54,9 @@ static u8 current_board_mac[MAIN_BOARD_MAC_ADDR_LENGTH] = {0};  //当前连接
 
 
 
-// =================================================================================
-// 核心回调函数 (Core Callback Handlers)
-// =================================================================================
+// ==================================================================================================================================================================
+// rfid功能相关
+// ==================================================================================================================================================================
 
 /**
  * @brief RFID回调处理函数 (由定时器周期性调用)
@@ -121,6 +129,11 @@ void rc_rfid_callback_handler(void *priv)
     }
 }
 
+
+// ==================================================================================================================================================================
+// ble功能相关
+// ==================================================================================================================================================================
+
 /**
  * @brief BLE回调处理函数 (由定时器周期性调用)s
  */
@@ -195,9 +208,130 @@ static RFID_Device_Type_t get_rfid_device_type(const u8* uid)
 
     return RFID_DEVICE_TYPE_UNKNOWN;
 }
-// =================================================================================
-// 辅助函数 (Helper Functions)
-// =================================================================================
+
+// ==================================================================================================================================================================
+// 遥感按键相关
+// ==================================================================================================================================================================
+/**
+ * @brief 遥感按键初始化
+ * 
+ */
+void control_key_init(void){
+    //Yout
+    adc_add_sample_ch(AD_CH_PG5);
+    gpio_set_die(IO_PORTG_05, 0);
+    gpio_set_direction(IO_PORTG_05, 1);
+    gpio_set_pull_down(IO_PORTG_05, 0);
+    gpio_set_pull_up(IO_PORTG_05, 0);
+
+    //Xout
+    adc_add_sample_ch(AD_CH_PG7);
+    gpio_set_die(IO_PORTG_07, 0);
+    gpio_set_direction(IO_PORTG_07, 1);
+    gpio_set_pull_down(IO_PORTG_07, 0);
+    gpio_set_pull_up(IO_PORTG_07, 0);
+
+    //key 1：默认为高，按下为低
+    gpio_set_die(IO_PORTG_06, 1);
+    gpio_set_direction(IO_PORTG_06, 1);
+    gpio_set_pull_down(IO_PORTG_06, 0);
+    gpio_set_pull_up(IO_PORTG_06, 1);
+}
+
+/**
+ * @brief 获取遥感按键值
+ * 
+ * @param Xout_adc x轴遥感adc
+ * @param Yout_adc y轴遥感adc
+ * @param key1_state 按键1值
+ * @param key2_state 按键2值
+ */
+void control_key_get_value(u16* Xout_adc, u16* Yout_adc, u8* key1_state, u8* key2_state){
+    *Xout_adc = (u16)adc_get_value(AD_CH_PG5) * 64;
+    *Yout_adc = (u16)adc_get_value(AD_CH_PG7) * 64;
+
+    if(*Yout_adc >= 65535){
+        *Yout_adc = 65535;
+    }
+    if(*Xout_adc >= 65535){
+        *Xout_adc = 65535;
+    }
+
+    *key1_state = gpio_read(IO_PORTG_06);
+    rc_log("adc_get_value: Xout = %d, Yout = %d, key1_state = %d, key2_state = %d\n", *Xout_adc , *Yout_adc, *key1_state, 1);
+}
+
+/**
+ * @brief 按键的处理任务
+ * 
+ */
+void contol_key_task(void){
+    static u16 vbat_value = 0;  //当前剩余电量
+    static u16 Xout_adc = 0;
+    static u16 Yout_adc = 0;
+    static u8 key1_state = 1;
+    u8 ble_data_buff[12] = {0xBE, 0xBB, 0x09, 0x01, //0-3
+                            0x00, 0x00, 0x00, 0x00, //4-7 遥感值：上下、左右
+                            0x00, 0x00,             //8、9 两个按键
+                            0x00,                   //10 电量百分比
+                            0x00};                  //11 校验和
+
+    control_key_init();  //遥感按键初始化
+
+    while(1){
+        extern u16 get_vbat_level(void);
+        vbat_value = get_vbat_level(); //当前电量
+        control_key_get_value(&Xout_adc, &Yout_adc, &key1_state, NULL); //遥感值
+        ble_data_buff[4] = (u8)(Yout_adc & 0xFF);
+        ble_data_buff[5] = (u8)((Yout_adc >> 8) & 0xFF);
+
+        ble_data_buff[6] = (u8)(Xout_adc & 0xFF);
+        ble_data_buff[7] = (u8)((Xout_adc >> 8) & 0xFF);
+
+        ble_data_buff[8] = key1_state;
+        ble_data_buff[9] = 0x01;
+
+        ble_data_buff[10] = get_vbat_percent();
+
+        ble_data_buff[11] = 0;
+        for(int i = 0 ;i < 11; i++){
+            ble_data_buff[11] += ble_data_buff[i];
+        }
+
+        // u8 test_buff[12] = {0xBE,0xBB,0x09,0x01,0x50,0x50,0x50,0x50,0x01,0x01,0x50,0x15};
+        g_send_data_to_ble_server(ble_data_buff, sizeof(ble_data_buff));
+        /*
+        1000
+        700
+        500
+        */
+        os_time_dly(10); //10ms为单位
+    }
+}
+
+/**
+ * @brief 和主板ble连接上后会被调用
+ * 
+ */
+void create_key_detect_thread(void){
+    key_detect_sign = 1;
+    os_task_create(contol_key_task, NULL, 1, 2048, 128, control_key_task_name);
+}
+
+/**
+ * @brief 和主板ble断连后会被调用
+ * 
+ */
+void destroy_key_detect_thread(void){
+    if(key_detect_sign == 1){
+        key_detect_sign = 0;
+        os_task_del(control_key_task_name);
+    }
+}
+
+// ==================================================================================================================================================================
+// 辅助函数
+// ==================================================================================================================================================================
 
 /**
  * @brief 进入 CONNECTING 状态的逻辑
@@ -237,8 +371,9 @@ static void rc_ble_state_set_disconnected(void)
     // 在这里控制LED灯效，例如黄灯呼吸闪烁
 }
 
-// 初始化函数 (Initialization Function)
-// =================================================================================
+// ==================================================================================================================================================================
+// 初始化函数
+// ==================================================================================================================================================================
 
 /**
  * @brief 遥控器应用主初始化函数
@@ -247,21 +382,21 @@ void rc_app_main_init(void)
 {
     rc_log("Initializing Remote Control App...\n");
 
-    // 1. 初始化全局上下文
+    // 初始化全局上下文
     memset(&g_rc_context, 0, sizeof(RC_Context_t));
     g_rc_context.state = RC_STATE_DISCONNECTED; // 初始状态为未连接
     g_rc_context.team = TEAM_NO;
     FM176XX_HardInit();
 
-    // 2. 检查并启动RFID处理定时器
+    // 检查并启动RFID处理定时器
     if (g_rfid_timer_id == 0) {
-        g_rfid_timer_id = sys_timer_add(NULL, rc_rfid_callback_handler, RC_RFID_CALLBACK_INTERVAL_MS);
+        // g_rfid_timer_id = sys_timer_add(NULL, rc_rfid_callback_handler, RC_RFID_CALLBACK_INTERVAL_MS);
         rc_log("RFID handler timer started (ID: %d).\n", g_rfid_timer_id);
     }
 
-    // 3. 检查并启动BLE处理定时器
+    // 检查并启动BLE处理定时器
     if (g_ble_timer_id == 0) {
-        g_ble_timer_id = sys_timer_add(NULL, rc_ble_callback_handler, RC_BLE_CALLBACK_INTERVAL_MS);
+        // g_ble_timer_id = sys_timer_add(NULL, rc_ble_callback_handler, RC_BLE_CALLBACK_INTERVAL_MS);
         rc_log("BLE handler timer started (ID: %d).\n", g_ble_timer_id);
     }
 }
@@ -270,23 +405,90 @@ void rc_app_main_init(void)
 ///////////////////////////////////////////////////////////////////////////////////////////////
 //test
 #define TEST_FUNCTION 1
+
+void g_i2c_scanner_probe(u8* device_addr, u8* found_number)
+{
+    printf("Starting I2C bus scan...\n");
+    int devices_found = 0;
+
+    // I2C地址范围是 0x08 到 0x77
+    for (uint8_t addr_7bit = 0x00; addr_7bit < 0x7F; addr_7bit++)
+    {
+        // 构建8位的写地址
+        uint8_t write_addr_8bit = (addr_7bit << 1);
+
+        //传入使用的iic句柄编号
+        soft_iic_start(0);
+
+        // 尝试发送写地址，并检查返回值
+        // iic_tx_byte 返回 1 表示收到了 ACK
+        if (soft_iic_tx_byte(0, write_addr_8bit))
+        {
+            printf("=====================================================================\n");
+            printf("I2C device found at 7-bit address: 0x%02X\n", addr_7bit);
+            printf("I2C device found at 8-bit address: 0x%02X\n", write_addr_8bit);
+            printf("=====================================================================\n");
+            devices_found++;
+        }
+
+        //传入使用的iic句柄编号
+        soft_iic_stop(0);
+        mdelay(2); // 短暂延时
+    }
+
+    if (devices_found == 0) {
+        printf("Scan finished. No I2C devices found.\n");
+    } else {
+        printf("Scan finished. Found %d device(s).\n", devices_found);
+    }
+}
+
 void test_task(void){
 
     
     #if TEST_FUNCTION == 1
+    unsigned char reg_data = 0;
+    unsigned char command = 0;
     FM176XX_HardInit();
+    rfid_delay_ms(5); // 硬件初始化后增加一个短暂延时，确保芯片稳定
+    int result = FM176XX_SoftReset();
+    // if (result != SUCCESS)
+    // {
+    //     rc_log("FM176XX HardReset FAIL\r\n");
+    // }
+    // else
+    // {
+    //     rc_log("FM176XX HardReset SUCCESS\r\n");
+    // }
+    
+    rfid_delay_ms(10); // 复位后延时
+    
+    // 读取芯片版本号，确认通信是否正常
+    GetReg(REG_VERSION, &reg_data);
+    rc_log("REG_VERSION = %02X\r\n", reg_data);
+
+
+     u8 device_buff[10];
+    u8 founds = 0;
+    extern void g_i2c_scanner_probe(u8* device_addr, u8* found_number);
+    g_i2c_scanner_probe(device_buff,&founds);
+    
     while(1){
         u8 uid[UID_LENGTH] = {0};
         //读id卡
-        TYPE_V_EVENT((char *)uid); 
-        // TYPE_A_EVENT((char *)uid);
-
-        os_time_dly(100);
+        // TYPE_V_EVENT((char *)uid); 
+        TYPE_A_EVENT((char *)uid);
+        os_time_dly(500);
     }
     #endif
 }
 void test_func_main(void){
     #if TEST_FUNCTION == 1
+
     os_task_create(test_task, NULL, 1, 1024, 128, "rfid_test");
+    extern void pwm_test_main(void);
+    // os_task_create(pwm_test_main, NULL, 1, 1024, 128, "pwm_test");  //pwm测试
+    // os_task_create(contol_key_task, NULL, 1, 2048, 128, control_key_task_name);
+
     #endif
 }

apps/earphone/xtell_remote_control/task_func.h

@@ -37,7 +37,7 @@ typedef enum {
 typedef enum {
     TEAM_NO,  //未组队
     TEAM_YES,   
-} RC_State_t;
+} RC_Team_t;
 
 /**
  * @brief RFID读取到的设备类型
@@ -53,7 +53,7 @@ typedef enum {
  */
 typedef struct {
     RC_State_t state;                       // 当前状态机状态
-    RC_State_t team;                  //当前是否组队
+    RC_Team_t team;                  //当前是否组队
     u8 paired_mac_addr[UID_LENGTH];         // 已配对主板的MAC地址(包含前缀)
     // ... 可在此处添加更多运行时需要管理的数据
 } RC_Context_t;

apps/earphone/xtell_remote_control/xtell_app_main.c

@@ -8,7 +8,7 @@
 #include "app_charge.h"
 #include "bt_profile_cfg.h"
 #include "debug.h"
-
+#include "avctp_user.h"
 
 ///////////////////////////////////////////////////////////////////////////////////////////////////
 //宏定义
@@ -38,6 +38,10 @@
 //-------------------------------------------------------------------------------------------------//
 extern APP_VAR app_var;
 
+//-------------------------------------------------------------------------------------------------//
+// 全局变量
+//-------------------------------------------------------------------------------------------------//
+unsigned char xt_bt_new_name[13] = "WEBIRD-XXXXX";  //经典蓝牙名称
 
 //-------------------------------------------------------------------------------------------------//
 // 系统主函数 app_main
@@ -119,6 +123,21 @@ void xtell_app_main()
 
     xlog("==============xtell_app_end================\n");
 
+    u8 mac_data[6];
+    extern void rcsp_adv_fill_mac_addr(u8 *mac_addr_buf);
+    rcsp_adv_fill_mac_addr(mac_data);           //读取MAC地址
+    xlog("xtell BT mac data:%x:%x:%x:%x:%x:%x",mac_data[0],mac_data[1],mac_data[2],mac_data[3],mac_data[4],mac_data[5]);
+    
+    // user_send_cmd_prepare(USER_CTRL_WRITE_SCAN_ENABLE, 0, NULL);            //打开蓝牙可发现,已连接时不能操作
+    // delay_2ms(50);
+    // user_send_cmd_prepare(USER_CTRL_WRITE_CONN_ENABLE, 0, NULL);            //打开蓝牙可连接
+    // delay_2ms(50);
+
+    // soft_iic_init(0);
+    // extern int xtell_bt_newname(u8 *new_name);
+    // xtell_bt_newname(xt_bt_new_name);  //设置经典蓝牙名
+
+
     extern void test_func_main(void);
     test_func_main();
 }

cpu/br28/sdk.ld

@@ -13,6 +13,11 @@
 
 
 
+
+
+
+
+
 
 
 

cpu/br28/sdk_used_list.used

@@ -13,6 +13,11 @@
 
 
 
+
+
+
+
+
 
 
 sdfile_vfs_ops

cpu/br28/smart_voice/vad_mic.c

@@ -113,7 +113,7 @@ int lp_vad_mic_data_init(struct vad_mic_platform_data *mic_data)
     if (vbg_trim != 0xf) {
         data->power_data.acm_select = get_vad_vbg_trim();
     }
-    lp_vad_mic_in_enable(mic_data);
+    // lp_vad_mic_in_enable(mic_data);  //xtell mic
     return 0;
 }
 

cpu/br28/tools/download.bat

@@ -13,6 +13,11 @@
 
 
 
+
+
+
+
+
 
 
 

cpu/br28/tools/download/earphone/download.bat

@@ -10,7 +10,7 @@ copy ..\..\ota.bin .
 copy ..\..\anc_coeff.bin .
 copy ..\..\anc_gains.bin .
 
-..\..\isd_download.exe ..\..\isd_config.ini -tonorflash -dev br28 -boot 0x120000 -div8 -wait 300 -uboot ..\..\uboot.boot -app ..\..\app.bin -res ..\..\cfg_tool.bin tone.cfg p11_code.bin ..\..\eq_cfg_hw.bin -uboot_compress -format all 
+..\..\isd_download.exe ..\..\isd_config.ini -tonorflash -dev br28 -boot 0x120000 -div8 -wait 300 -uboot ..\..\uboot.boot -app ..\..\app.bin -res ..\..\cfg_tool.bin tone.cfg p11_code.bin ..\..\eq_cfg_hw.bin -uboot_compress -format all -key 646-AC690X-7603.key
 
 @REM..\..\isd_download.exe ..\..\isd_config.ini -tonorflash -dev br34 -boot 0x20000 -div8 -wait 300 -uboot ..\..\uboot.boot -app ..\..\app.bin ..\..\cfg_tool.bin -res tone.cfg kws_command.bin p11_code.bin -uboot_compress
 

cpu/br28/tools/isd_config.ini

@@ -13,13 +13,19 @@
 
 
 
+
+
+
+
+
 [EXTRA_CFG_PARAM]
+NEW_FLASH_FS = YES;
+
+
+
+
+
 
-BR22_TWS_DB = YES;
-FLASH_SIZE = 0x100000;
-BR22_TWS_VERSION = 0;
-FORCE_4K_ALIGN = YES;
-SPECIAL_OPT = 0;
 CHIP_NAME = AC701N;
 ENTRY = 0x6000100;
 PID = AC701N;
@@ -68,6 +74,18 @@ FILE_LIST = (file = ota.bin: type = 100);
 BTIF_ADR = AUTO;
 BTIF_LEN = 0x1000;
 BTIF_OPT = 1;
+
+
+EXIF_ADR = AUTO;
+EXIF_LEN = 0x1000;
+EXIF_OPT = 1;
+
+
+
+
+
+
+
 PRCT_ADR = 0;
 PRCT_LEN = CODE_LEN;
 PRCT_OPT = 2;

cpu/br28/tools/sdk.elf.resolution.txt

@@ -2275,168 +2275,6 @@ objs/apps/earphone/bt_tws.c.o
 objs/apps/earphone/default_event_handler.c.o
 -r=objs/apps/earphone/default_event_handler.c.o,default_event_handler,pl
 objs/apps/earphone/earphone.c.o
--r=objs/apps/earphone/earphone.c.o,get_bt_init_status,pl
--r=objs/apps/earphone/earphone.c.o,get_sniff_out_status,pl
--r=objs/apps/earphone/earphone.c.o,clear_sniff_out_status,pl
--r=objs/apps/earphone/earphone.c.o,earphone_change_pwr_mode,pl
--r=objs/apps/earphone/earphone.c.o,bt_wait_phone_connect_control,pl
--r=objs/apps/earphone/earphone.c.o,log_print,l
--r=objs/apps/earphone/earphone.c.o,is_1t2_connection,l
--r=objs/apps/earphone/earphone.c.o,get_total_connect_dev,l
--r=objs/apps/earphone/earphone.c.o,user_send_cmd_prepare,l
--r=objs/apps/earphone/earphone.c.o,bt_send_keypress,pl
--r=objs/apps/earphone/earphone.c.o,bt_send_pair,pl
--r=objs/apps/earphone/earphone.c.o,bt_init_ok_search_index,pl
--r=objs/apps/earphone/earphone.c.o,get_current_poweron_memory_search_index,l
--r=objs/apps/earphone/earphone.c.o,clear_current_poweron_memory_search_index,l
--r=objs/apps/earphone/earphone.c.o,bt_wait_connect_and_phone_connect_switch,pl
--r=objs/apps/earphone/earphone.c.o,sys_timeout_add,l
--r=objs/apps/earphone/earphone.c.o,bt_close_page_scan,pl
--r=objs/apps/earphone/earphone.c.o,sys_timer_del,l
--r=objs/apps/earphone/earphone.c.o,bt_fast_test_api,pl
--r=objs/apps/earphone/earphone.c.o,audio_fast_mode_test,l
--r=objs/apps/earphone/earphone.c.o,pwm_led_mode_set,l
--r=objs/apps/earphone/earphone.c.o,bt_fix_fre_api,pl
--r=objs/apps/earphone/earphone.c.o,bit_clr_ie,l
--r=objs/apps/earphone/earphone.c.o,bredr_fcc_init,l
--r=objs/apps/earphone/earphone.c.o,bt_fix_txrx_api,pl
--r=objs/apps/earphone/earphone.c.o,local_irq_disable,l
--r=objs/apps/earphone/earphone.c.o,link_fix_txrx_disable,
--r=objs/apps/earphone/earphone.c.o,link_fix_rx_enable,
--r=objs/apps/earphone/earphone.c.o,link_fix_tx_enable,
--r=objs/apps/earphone/earphone.c.o,local_irq_enable,l
--r=objs/apps/earphone/earphone.c.o,bt_updata_fix_rx_result,pl
--r=objs/apps/earphone/earphone.c.o,link_fix_rx_update_result,
--r=objs/apps/earphone/earphone.c.o,printf,l
--r=objs/apps/earphone/earphone.c.o,spp_data_handler,pl
--r=objs/apps/earphone/earphone.c.o,bredr_handle_register,pl
--r=objs/apps/earphone/earphone.c.o,spp_data_deal_handle_register,l
--r=objs/apps/earphone/earphone.c.o,bt_fast_test_handle_register,l
--r=objs/apps/earphone/earphone.c.o,music_vol_change_handle_register,l
--r=objs/apps/earphone/earphone.c.o,set_music_device_volume,l
--r=objs/apps/earphone/earphone.c.o,phone_get_device_vol,l
--r=objs/apps/earphone/earphone.c.o,get_battery_value_register,l
--r=objs/apps/earphone/earphone.c.o,bt_dut_test_handle_register,l
--r=objs/apps/earphone/earphone.c.o,bt_function_select_init,pl
--r=objs/apps/earphone/earphone.c.o,set_bt_afh_classs_enc,l
--r=objs/apps/earphone/earphone.c.o,__set_user_ctrl_conn_num,l
--r=objs/apps/earphone/earphone.c.o,__set_support_msbc_flag,l
--r=objs/apps/earphone/earphone.c.o,__set_aac_bitrate,l
--r=objs/apps/earphone/earphone.c.o,__set_support_aac_flag,l
--r=objs/apps/earphone/earphone.c.o,__set_support_ldac_flag,l
--r=objs/apps/earphone/earphone.c.o,__bt_set_update_battery_time,l
--r=objs/apps/earphone/earphone.c.o,__set_page_timeout_value,l
--r=objs/apps/earphone/earphone.c.o,__set_super_timeout_value,l
--r=objs/apps/earphone/earphone.c.o,vol_sys_tab_init,l
--r=objs/apps/earphone/earphone.c.o,__set_simple_pair_param,l
--r=objs/apps/earphone/earphone.c.o,bt_testbox_ex_info_get_handle_register,l
--r=objs/apps/earphone/earphone.c.o,get_vbat_value,l
--r=objs/apps/earphone/earphone.c.o,get_vbat_percent,l
--r=objs/apps/earphone/earphone.c.o,sdfile_get_burn_code,l
--r=objs/apps/earphone/earphone.c.o,lib_make_ble_address,l
--r=objs/apps/earphone/earphone.c.o,bt_get_mac_addr,l
--r=objs/apps/earphone/earphone.c.o,le_controller_set_mac,l
--r=objs/apps/earphone/earphone.c.o,printf_buf,l
--r=objs/apps/earphone/earphone.c.o,set_bt_enhanced_power_control,l
--r=objs/apps/earphone/earphone.c.o,set_g_need_inc_power,l
--r=objs/apps/earphone/earphone.c.o,phone_sync_vol,pl
--r=objs/apps/earphone/earphone.c.o,get_esco_packet_dump,pl
--r=objs/apps/earphone/earphone.c.o,task_switch,pl
--r=objs/apps/earphone/earphone.c.o,get_current_app,l
--r=objs/apps/earphone/earphone.c.o,start_app,l
--r=objs/apps/earphone/earphone.c.o,bt_is_sniff_close,pl
--r=objs/apps/earphone/earphone.c.o,bt_check_exit_sniff,pl
--r=objs/apps/earphone/earphone.c.o,sys_timeout_del,l
--r=objs/apps/earphone/earphone.c.o,bt_sniff_ready_clean,pl
--r=objs/apps/earphone/earphone.c.o,bt_check_enter_sniff,pl
--r=objs/apps/earphone/earphone.c.o,bt_api_enter_sniff_status_check,l
--r=objs/apps/earphone/earphone.c.o,cpu_assert_debug,l
--r=objs/apps/earphone/earphone.c.o,sys_auto_sniff_controle,pl
--r=objs/apps/earphone/earphone.c.o,bt_api_conn_mode_check,l
--r=objs/apps/earphone/earphone.c.o,sys_timer_add,l
--r=objs/apps/earphone/earphone.c.o,lmp_rx_sniff_req_check,pl
--r=objs/apps/earphone/earphone.c.o,bt_sniff_set_enable,pl
--r=objs/apps/earphone/earphone.c.o,tws_sniff_controle_check_enable,
--r=objs/apps/earphone/earphone.c.o,bt_sniff_feature_init,pl
--r=objs/apps/earphone/earphone.c.o,wait_exit_btstack_flag,pl
--r=objs/apps/earphone/earphone.c.o,bt_audio_is_running,l
--r=objs/apps/earphone/earphone.c.o,lmp_hci_reset,l
--r=objs/apps/earphone/earphone.c.o,os_time_dly,l
--r=objs/apps/earphone/earphone.c.o,get_curr_channel_state,l
--r=objs/apps/earphone/earphone.c.o,hci_standard_connect_check,l
--r=objs/apps/earphone/earphone.c.o,poweroff_sniff_all_exit,pl
--r=objs/apps/earphone/earphone.c.o,bt_api_get_sniff_state,l
--r=objs/apps/earphone/earphone.c.o,sys_enter_soft_poweroff,pl
--r=objs/apps/earphone/earphone.c.o,ui_update_status,l
--r=objs/apps/earphone/earphone.c.o,sys_key_event_disable,l
--r=objs/apps/earphone/earphone.c.o,sys_event_clear,l
--r=objs/apps/earphone/earphone.c.o,sys_auto_shut_down_disable,pl
--r=objs/apps/earphone/earphone.c.o,sys_auto_shut_down_enable,pl
--r=objs/apps/earphone/earphone.c.o,phone_num_play_timer,pl
--r=objs/apps/earphone/earphone.c.o,get_call_status,l
--r=objs/apps/earphone/earphone.c.o,is_siri_open,l
--r=objs/apps/earphone/earphone.c.o,tone_play_stop,l
--r=objs/apps/earphone/earphone.c.o,tone_file_list_play,l
--r=objs/apps/earphone/earphone.c.o,phone_check_inband_ring_play_timer,pl
--r=objs/apps/earphone/earphone.c.o,get_esco_coder_busy_flag,l
--r=objs/apps/earphone/earphone.c.o,phone_ring_play_start,pl
--r=objs/apps/earphone/earphone.c.o,earphone_a2dp_codec_get_low_latency_mode,l
--r=objs/apps/earphone/earphone.c.o,earphone_a2dp_codec_set_low_latency_mode,l
--r=objs/apps/earphone/earphone.c.o,bt_get_low_latency_mode,pl
--r=objs/apps/earphone/earphone.c.o,bt_set_low_latency_mode,pl
--r=objs/apps/earphone/earphone.c.o,testbox_in_ear_detect_test_flag_get,pl
--r=objs/apps/earphone/earphone.c.o,bt_hci_event_handler,pl
--r=objs/apps/earphone/earphone.c.o,set_remote_test_flag,l
--r=objs/apps/earphone/earphone.c.o,bt_ble_adv_enable,l
--r=objs/apps/earphone/earphone.c.o,bt_in_background_event_handler,pl
--r=objs/apps/earphone/earphone.c.o,bt_app_exit_check,pl
--r=objs/apps/earphone/earphone.c.o,bt_app_exit,pl
--r=objs/apps/earphone/earphone.c.o,a2dp_get_status,l
--r=objs/apps/earphone/earphone.c.o,bt_media_is_running,l
--r=objs/apps/earphone/earphone.c.o,a2dp_dec_close,l
--r=objs/apps/earphone/earphone.c.o,a2dp_media_clear_packet_before_seqn,l
--r=objs/apps/earphone/earphone.c.o,btstack_exit,l
--r=objs/apps/earphone/earphone.c.o,bredr_close_all_scan,l
--r=objs/apps/earphone/earphone.c.o,get_cur_battery_level,l
--r=objs/apps/earphone/earphone.c.o,sdk_version_info_get,l
--r=objs/apps/earphone/earphone.c.o,strlen,l
--r=objs/apps/earphone/earphone.c.o,p33_soft_reset,l
--r=objs/apps/earphone/earphone.c.o,get_remote_test_flag,l
--r=objs/apps/earphone/earphone.c.o,get_esco_busy_flag,l
--r=objs/apps/earphone/earphone.c.o,audio_adc_mic_demo_close,l
--r=objs/apps/earphone/earphone.c.o,tone_play_index,l
--r=objs/apps/earphone/earphone.c.o,app_earphone_key_event_handler,l
--r=objs/apps/earphone/earphone.c.o,app_power_event_handler,l
--r=objs/apps/earphone/earphone.c.o,get_tone_config,l
--r=objs/apps/earphone/earphone.c.o,__set_sbc_cap_bitpool,l
--r=objs/apps/earphone/earphone.c.o,ble_bqb_test_thread_init,l
--r=objs/apps/earphone/earphone.c.o,bt_ble_init,l
--r=objs/apps/earphone/earphone.c.o,is_dac_power_off,l
--r=objs/apps/earphone/earphone.c.o,tone_get_status,l
--r=objs/apps/earphone/earphone.c.o,check_esco_state_via_addr,l
--r=objs/apps/earphone/earphone.c.o,get_device_inband_ringtone_flag,l
--r=objs/apps/earphone/earphone.c.o,lmp_private_esco_suspend_resume,l
--r=objs/apps/earphone/earphone.c.o,app_audio_set_volume,l
--r=objs/apps/earphone/earphone.c.o,a2dp_dec_open,l
--r=objs/apps/earphone/earphone.c.o,free_a2dp_using_decoder_conn,l
--r=objs/apps/earphone/earphone.c.o,puts,l
--r=objs/apps/earphone/earphone.c.o,aac_decoder_energy_det_close,l
--r=objs/apps/earphone/earphone.c.o,esco_dec_open,l
--r=objs/apps/earphone/earphone.c.o,esco_dec_close,l
--r=objs/apps/earphone/earphone.c.o,clk_set_sys_lock,l
--r=objs/apps/earphone/earphone.c.o,init_ok,pl
--r=objs/apps/earphone/earphone.c.o,sniff_out,pl
--r=objs/apps/earphone/earphone.c.o,app_var,l
--r=objs/apps/earphone/earphone.c.o,log_tag_const_i_EARPHONE,l
--r=objs/apps/earphone/earphone.c.o,bt_user_priv_var,pl
--r=objs/apps/earphone/earphone.c.o,CONFIG_WIFI_DETECT_ENABLE,l
--r=objs/apps/earphone/earphone.c.o,sniff_ready_status,pl
--r=objs/apps/earphone/earphone.c.o,exit_sniff_timer,pl
--r=objs/apps/earphone/earphone.c.o,config_asser,l
--r=objs/apps/earphone/earphone.c.o,phone_incom_lp_target,pl
--r=objs/apps/earphone/earphone.c.o,bt_user_comm_var,pl
--r=objs/apps/earphone/earphone.c.o,config_btctler_mode,l
--r=objs/apps/earphone/earphone.c.o,hid_conn_depend_on_dev_company,l
 objs/apps/earphone/eartch_event_deal.c.o
 objs/apps/earphone/font/fontinit.c.o
 objs/apps/earphone/idle.c.o
@@ -3345,14 +3183,12 @@ objs/apps/earphone/rcsp/jl_phone_app.c.o
 objs/apps/earphone/rcsp/rcsp_adv.c.o
 objs/apps/earphone/tone_table.c.o
 -r=objs/apps/earphone/tone_table.c.o,tone_play_index,pl
--r=objs/apps/earphone/tone_table.c.o,printf,l
--r=objs/apps/earphone/tone_table.c.o,tone_play,l
 -r=objs/apps/earphone/tone_table.c.o,tone_name_cmp_by_index,pl
 -r=objs/apps/earphone/tone_table.c.o,tone_name_compare,l
 -r=objs/apps/earphone/tone_table.c.o,tone_play_index_no_tws,pl
+-r=objs/apps/earphone/tone_table.c.o,printf,l
 -r=objs/apps/earphone/tone_table.c.o,tone_play_no_tws,l
 -r=objs/apps/earphone/tone_table.c.o,tone_play_index_with_callback,pl
--r=objs/apps/earphone/tone_table.c.o,tone_play_with_callback,l
 -r=objs/apps/earphone/tone_table.c.o,tone_table_init,pl
 -r=objs/apps/earphone/tone_table.c.o,tone_play_set_sine_param_handler,l
 -r=objs/apps/earphone/tone_table.c.o,__initcall_tone_table_init,pl
@@ -3405,6 +3241,12 @@ objs/apps/earphone/user_cfg.c.o
 -r=objs/apps/earphone/user_cfg.c.o,strlen,l
 -r=objs/apps/earphone/user_cfg.c.o,strcmp,l
 -r=objs/apps/earphone/user_cfg.c.o,lmp_hci_write_local_name,l
+-r=objs/apps/earphone/user_cfg.c.o,xtell_bt_newname,pl
+-r=objs/apps/earphone/user_cfg.c.o,user_send_cmd_prepare,l
+-r=objs/apps/earphone/user_cfg.c.o,delay_2ms,l
+-r=objs/apps/earphone/user_cfg.c.o,bt_ble_init,l
+-r=objs/apps/earphone/user_cfg.c.o,connect_last_device_from_vm,l
+-r=objs/apps/earphone/user_cfg.c.o,puts,l
 -r=objs/apps/earphone/user_cfg.c.o,bt_cfg,pl
 -r=objs/apps/earphone/user_cfg.c.o,audio_cfg,pl
 -r=objs/apps/earphone/user_cfg.c.o,btif_table,pl
@@ -4822,10 +4664,6 @@ objs/cpu/br28/smart_voice/vad_mic.c.o
 -r=objs/cpu/br28/smart_voice/vad_mic.c.o,free,l
 -r=objs/cpu/br28/smart_voice/vad_mic.c.o,lp_vad_mic_test,pl
 -r=objs/cpu/br28/smart_voice/vad_mic.c.o,vad_disable,pl
--r=objs/cpu/br28/smart_voice/vad_mic.c.o,gpio_set_direction,l
--r=objs/cpu/br28/smart_voice/vad_mic.c.o,gpio_set_die,l
--r=objs/cpu/br28/smart_voice/vad_mic.c.o,gpio_set_pull_up,l
--r=objs/cpu/br28/smart_voice/vad_mic.c.o,gpio_set_pull_down,l
 -r=objs/cpu/br28/smart_voice/vad_mic.c.o,__local_irq_disable,l
 -r=objs/cpu/br28/smart_voice/vad_mic.c.o,__local_irq_enable,l
 -r=objs/cpu/br28/smart_voice/vad_mic.c.o,lp_vad,pl
@@ -5162,66 +5000,183 @@ objs/apps/common/colorful_lights/colorful_lights.c.o
 -r=objs/apps/common/colorful_lights/colorful_lights.c.o,usr_timer_del,l
 -r=objs/apps/common/colorful_lights/colorful_lights.c.o,spi_dma_set_addr_for_isr,l
 objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,le_user_app_send_event,pl
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,sys_event_notify,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,le_user_app_event_handler,pl
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,nvs_test_factory_info,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,create_process,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,rfid_task_fuc,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,hw_iic_init,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,get_bt_init_status,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,get_sniff_out_status,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,clear_sniff_out_status,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,earphone_change_pwr_mode,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_wait_phone_connect_control,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,log_print,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,is_1t2_connection,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,get_total_connect_dev,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,user_send_cmd_prepare,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_send_keypress,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_send_pair,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_init_ok_search_index,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,get_current_poweron_memory_search_index,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,clear_current_poweron_memory_search_index,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_wait_connect_and_phone_connect_switch,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,sys_timeout_add,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_close_page_scan,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,sys_timer_del,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_fast_test_api,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,audio_fast_mode_test,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,pwm_led_mode_set,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_fix_fre_api,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bit_clr_ie,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bredr_fcc_init,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_fix_txrx_api,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,local_irq_disable,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,link_fix_txrx_disable,
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,link_fix_rx_enable,
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,link_fix_tx_enable,
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,local_irq_enable,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_updata_fix_rx_result,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,link_fix_rx_update_result,
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,printf,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,i2c_scanner_probe,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,clk_set,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,clk_get,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_pll_para,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_function_select_init,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bredr_handle_register,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,btstack_init,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,sys_auto_shut_down_enable,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_sniff_feature_init,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,sys_auto_sniff_controle,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,sys_auto_shut_down_disable,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,sys_key_event_enable,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_app_exit,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_hci_event_handler,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,spp_data_handler,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bredr_handle_register,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,spp_data_deal_handle_register,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_fast_test_handle_register,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,music_vol_change_handle_register,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,set_music_device_volume,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,phone_get_device_vol,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,get_battery_value_register,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_dut_test_handle_register,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_function_select_init,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,set_bt_afh_classs_enc,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,__set_user_ctrl_conn_num,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,__set_support_msbc_flag,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,__set_aac_bitrate,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,__set_support_aac_flag,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,__set_support_ldac_flag,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,__bt_set_update_battery_time,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,__set_simple_pair_flag,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,__set_page_timeout_value,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,__set_super_timeout_value,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,vol_sys_tab_init,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,__set_simple_pair_param,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_testbox_ex_info_get_handle_register,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,get_vbat_value,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,get_vbat_percent,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,sdfile_get_burn_code,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,lib_make_ble_address,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_get_mac_addr,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,le_controller_set_mac,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,printf_buf,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,set_bt_enhanced_power_control,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,set_g_need_inc_power,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,phone_sync_vol,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,get_esco_packet_dump,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,task_switch,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,get_current_app,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,start_app,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_is_sniff_close,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_check_exit_sniff,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,sys_timeout_del,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_sniff_ready_clean,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_check_enter_sniff,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_api_enter_sniff_status_check,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,cpu_assert_debug,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,sys_auto_sniff_controle,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_api_conn_mode_check,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,sys_timer_add,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,lmp_rx_sniff_req_check,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_sniff_set_enable,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,tws_sniff_controle_check_enable,
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_sniff_feature_init,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,wait_exit_btstack_flag,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_audio_is_running,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,lmp_hci_reset,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,os_time_dly,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,get_curr_channel_state,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,hci_standard_connect_check,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,poweroff_sniff_all_exit,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_api_get_sniff_state,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,sys_enter_soft_poweroff,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,ui_update_status,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,sys_key_event_disable,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,sys_event_clear,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,sys_auto_shut_down_disable,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,sys_auto_shut_down_enable,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,phone_num_play_timer,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,get_call_status,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,is_siri_open,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,tone_play_stop,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,tone_file_list_play,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,phone_check_inband_ring_play_timer,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,get_esco_coder_busy_flag,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,phone_ring_play_start,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,earphone_a2dp_codec_get_low_latency_mode,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,earphone_a2dp_codec_set_low_latency_mode,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_get_low_latency_mode,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_set_low_latency_mode,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,testbox_in_ear_detect_test_flag_get,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_in_background_event_handler,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_app_exit_check,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_app_exit,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,a2dp_get_status,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_media_is_running,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,a2dp_dec_close,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,a2dp_media_clear_packet_before_seqn,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,btstack_exit,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bredr_close_all_scan,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_ble_adv_enable,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,get_cur_battery_level,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,sdk_version_info_get,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,strlen,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,p33_soft_reset,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,audio_adc_mic_demo_close,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,tone_play_index,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,app_earphone_key_event_handler,l
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,app_power_event_handler,l
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,default_event_handler,l
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,get_tone_config,l
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,__set_sbc_cap_bitpool,l
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,ble_bqb_test_thread_init,l
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_ble_init,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_init_ok_search_index,l
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,is_dac_power_off,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_wait_connect_and_phone_connect_switch,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,sys_timeout_add,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,clear_current_poweron_memory_search_index,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,strcmp,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,earphone_change_pwr_mode,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,ui_update_status,l
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,tone_get_status,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,get_call_status,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,sys_timeout_del,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,is_1t2_connection,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,get_current_poweron_memory_search_index,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,get_esco_coder_busy_flag,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,user_send_cmd_prepare,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,tone_play_index,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,xtell_bl_state,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,check_esco_state_via_addr,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,get_device_inband_ringtone_flag,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,lmp_private_esco_suspend_resume,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,app_audio_set_volume,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,a2dp_dec_open,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,free_a2dp_using_decoder_conn,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,puts,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,aac_decoder_energy_det_close,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,esco_dec_open,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,esco_dec_close,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,clk_set_sys_lock,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,set_remote_test_flag,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,get_remote_test_flag,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,get_esco_busy_flag,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,tone_play_index_with_callback,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,clk_set,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,clk_get,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_pll_para,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,btstack_init,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,sys_key_event_enable,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,xtell_uart_ai_14_bt_connect,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,xtell_uart_ai_34_bt_break,pl
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_newname,pl
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,xt_ble_new_name,pl
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,SC7U22_init,pl
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,MMC5603nj_init,pl
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,BMP280_init,pl
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,rfid_fuc_id,pl
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,SC7U22_calibration_id,pl
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,start_collect_fuc_id,pl
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,BLE_send_fuc_id,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,init_ok,pl
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,app_var,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,init_ok,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,log_tag_const_i_EARPHONE,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_user_priv_var,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,CONFIG_WIFI_DETECT_ENABLE,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,sniff_ready_status,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,exit_sniff_timer,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,config_asser,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,phone_incom_lp_target,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,bt_user_comm_var,pl
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,config_btctler_mode,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,sniff_out,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/ble_handler.c.o,hid_conn_depend_on_dev_company,l
 objs/apps/earphone/xtell_remote_control/ble_handler/ble_test.c.o
 objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,clear_bonding_info,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,l2cap_connection_update_request_just,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,user_client_report_search_result,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,user_client_report_data_callback,pl
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,ble_get_client_operation_table,pl
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,ble_profile_init,pl
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,le_device_db_init,l
@@ -5238,23 +5193,22 @@ objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,bt_ble_adv_enable,pl
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,client_send_conn_param_update,pl
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,ble_user_cmd_prepare,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,clear_bonding_info,pl
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,rcsp_adv_fill_mac_addr,pl
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,swapX,l
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,bt_get_mac_addr,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,g_ble_connect_new_device,pl
--r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,g_ble_get_state,pl
--r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,usr_timer_add,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,sys_timeout_del,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,g_send_data_to_ble_server,pl
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,printf,l
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,syscfg_read,l
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,syscfg_write,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,little_endian_read_16,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,printf,l
--r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,put_buf,l
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,memcmp,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,create_key_detect_thread,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,destroy_key_detect_thread,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,little_endian_read_16,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,put_buf,l
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,user_client_init,l
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,user_client_set_search_complete,l
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,sys_timer_add,l
+-r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,puts,l
 -r=objs/apps/earphone/xtell_remote_control/ble_handler/client_handler.c.o,client_user_target,pl
 objs/apps/earphone/xtell_remote_control/ble_handler/example/example.c.o
 objs/apps/earphone/xtell_remote_control/nvs/nvs.c.o
@@ -5263,12 +5217,23 @@ objs/apps/earphone/xtell_remote_control/nvs/nvs.c.o
 -r=objs/apps/earphone/xtell_remote_control/nvs/nvs.c.o,syscfg_write,l
 -r=objs/apps/earphone/xtell_remote_control/nvs/nvs.c.o,nvs_read_main_board_mac,pl
 -r=objs/apps/earphone/xtell_remote_control/nvs/nvs.c.o,syscfg_read,l
+-r=objs/apps/earphone/xtell_remote_control/nvs/nvs.c.o,nvs_clear_info,pl
 -r=objs/apps/earphone/xtell_remote_control/nvs/nvs.c.o,nvs_write_factory_info,pl
 -r=objs/apps/earphone/xtell_remote_control/nvs/nvs.c.o,nvs_read_factory_info,pl
 -r=objs/apps/earphone/xtell_remote_control/nvs/nvs.c.o,nvs_clear_factory_info,pl
 -r=objs/apps/earphone/xtell_remote_control/nvs/nvs.c.o,nvs_test_factory_info,pl
 -r=objs/apps/earphone/xtell_remote_control/nvs/nvs.c.o,os_time_dly,l
 -r=objs/apps/earphone/xtell_remote_control/nvs/nvs.c.o,puts,l
+objs/apps/earphone/xtell_remote_control/pwm_test.c.o
+-r=objs/apps/earphone/xtell_remote_control/pwm_test.c.o,pwm_test_init,pl
+-r=objs/apps/earphone/xtell_remote_control/pwm_test.c.o,mcpwm_init,l
+-r=objs/apps/earphone/xtell_remote_control/pwm_test.c.o,mcpwm_open,l
+-r=objs/apps/earphone/xtell_remote_control/pwm_test.c.o,pwm_test_set_pulse_width_us,pl
+-r=objs/apps/earphone/xtell_remote_control/pwm_test.c.o,mcpwm_set_duty,l
+-r=objs/apps/earphone/xtell_remote_control/pwm_test.c.o,pwm_test_sweep,pl
+-r=objs/apps/earphone/xtell_remote_control/pwm_test.c.o,mdelay,l
+-r=objs/apps/earphone/xtell_remote_control/pwm_test.c.o,pwm_test_main,pl
+-r=objs/apps/earphone/xtell_remote_control/pwm_test.c.o,os_time_dly,l
 objs/apps/earphone/xtell_remote_control/RFID/reader/CPU_CARD.c.o
 -r=objs/apps/earphone/xtell_remote_control/RFID/reader/CPU_CARD.c.o,CPU_CARD_EVENT,pl
 -r=objs/apps/earphone/xtell_remote_control/RFID/reader/CPU_CARD.c.o,CPU_Rats,pl
@@ -5392,6 +5357,9 @@ objs/apps/earphone/xtell_remote_control/RFID/rfid_event.c.o
 objs/apps/earphone/xtell_remote_control/RFID/rfid_hal.c.o
 -r=objs/apps/earphone/xtell_remote_control/RFID/rfid_hal.c.o,FM176XX_HardInit,pl
 -r=objs/apps/earphone/xtell_remote_control/RFID/rfid_hal.c.o,soft_iic_init,l
+-r=objs/apps/earphone/xtell_remote_control/RFID/rfid_hal.c.o,gpio_set_direction,l
+-r=objs/apps/earphone/xtell_remote_control/RFID/rfid_hal.c.o,gpio_write,l
+-r=objs/apps/earphone/xtell_remote_control/RFID/rfid_hal.c.o,mdelay,l
 -r=objs/apps/earphone/xtell_remote_control/RFID/rfid_hal.c.o,printf,l
 -r=objs/apps/earphone/xtell_remote_control/RFID/rfid_hal.c.o,GetReg,pl
 -r=objs/apps/earphone/xtell_remote_control/RFID/rfid_hal.c.o,soft_iic_start,l
@@ -5401,23 +5369,47 @@ objs/apps/earphone/xtell_remote_control/RFID/rfid_hal.c.o
 -r=objs/apps/earphone/xtell_remote_control/RFID/rfid_hal.c.o,SetReg,pl
 -r=objs/apps/earphone/xtell_remote_control/RFID/rfid_hal.c.o,FM176XX_SoftReset,pl
 -r=objs/apps/earphone/xtell_remote_control/RFID/rfid_hal.c.o,rfid_delay_ms,pl
--r=objs/apps/earphone/xtell_remote_control/RFID/rfid_hal.c.o,os_time_dly,l
+-r=objs/apps/earphone/xtell_remote_control/RFID/rfid_hal.c.o,debug_command,pl
 objs/apps/earphone/xtell_remote_control/task_func.c.o
 -r=objs/apps/earphone/xtell_remote_control/task_func.c.o,rc_rfid_callback_handler,pl
 -r=objs/apps/earphone/xtell_remote_control/task_func.c.o,TYPE_A_EVENT,l
 -r=objs/apps/earphone/xtell_remote_control/task_func.c.o,printf,l
 -r=objs/apps/earphone/xtell_remote_control/task_func.c.o,strncmp,l
 -r=objs/apps/earphone/xtell_remote_control/task_func.c.o,nvs_write_main_board_mac,l
--r=objs/apps/earphone/xtell_remote_control/task_func.c.o,g_ble_get_state,l
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,nvs_clear_info,l
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,g_ble_get_state,
 -r=objs/apps/earphone/xtell_remote_control/task_func.c.o,rc_ble_callback_handler,pl
 -r=objs/apps/earphone/xtell_remote_control/task_func.c.o,nvs_read_main_board_mac,l
--r=objs/apps/earphone/xtell_remote_control/task_func.c.o,rc_app_main_init,pl
--r=objs/apps/earphone/xtell_remote_control/task_func.c.o,sys_timer_add,l
--r=objs/apps/earphone/xtell_remote_control/task_func.c.o,test_task,pl
--r=objs/apps/earphone/xtell_remote_control/task_func.c.o,TYPE_V_EVENT,l
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,control_key_init,pl
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,adc_add_sample_ch,l
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,gpio_set_die,l
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,gpio_set_direction,l
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,gpio_set_pull_down,l
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,gpio_set_pull_up,l
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,control_key_get_value,pl
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,adc_get_value,l
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,gpio_read,l
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,contol_key_task,pl
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,get_vbat_level,l
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,get_vbat_percent,l
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,g_send_data_to_ble_server,l
 -r=objs/apps/earphone/xtell_remote_control/task_func.c.o,os_time_dly,l
--r=objs/apps/earphone/xtell_remote_control/task_func.c.o,test_func_main,pl
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,create_key_detect_thread,pl
 -r=objs/apps/earphone/xtell_remote_control/task_func.c.o,os_task_create,l
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,destroy_key_detect_thread,pl
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,os_task_del,l
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,rc_app_main_init,pl
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,FM176XX_HardInit,l
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,g_i2c_scanner_probe,pl
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,soft_iic_start,l
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,soft_iic_tx_byte,l
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,soft_iic_stop,l
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,mdelay,l
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,test_task,pl
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,rfid_delay_ms,l
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,FM176XX_SoftReset,l
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,GetReg,l
+-r=objs/apps/earphone/xtell_remote_control/task_func.c.o,test_func_main,pl
 -r=objs/apps/earphone/xtell_remote_control/task_func.c.o,puts,l
 objs/apps/earphone/xtell_remote_control/xtell_app_main.c.o
 -r=objs/apps/earphone/xtell_remote_control/xtell_app_main.c.o,create_process,pl
@@ -5434,8 +5426,10 @@ objs/apps/earphone/xtell_remote_control/xtell_app_main.c.o
 -r=objs/apps/earphone/xtell_remote_control/xtell_app_main.c.o,vbat_check_init,l
 -r=objs/apps/earphone/xtell_remote_control/xtell_app_main.c.o,start_app,l
 -r=objs/apps/earphone/xtell_remote_control/xtell_app_main.c.o,check_power_on_voltage,l
+-r=objs/apps/earphone/xtell_remote_control/xtell_app_main.c.o,rcsp_adv_fill_mac_addr,l
 -r=objs/apps/earphone/xtell_remote_control/xtell_app_main.c.o,test_func_main,l
 -r=objs/apps/earphone/xtell_remote_control/xtell_app_main.c.o,cpu_reset_by_soft,l
+-r=objs/apps/earphone/xtell_remote_control/xtell_app_main.c.o,xt_bt_new_name,pl
 -r=objs/apps/earphone/xtell_remote_control/xtell_app_main.c.o,app_var,l
 -r=objs/apps/earphone/xtell_remote_control/xtell_app_main.c.o,config_update_mode,l
 cpu/br28/liba/cpu.a.llvm.19376.crc16.c
@@ -8629,7 +8623,7 @@ cpu/br28/liba/btstack.a.llvm.343146.l2cap.c
 -r=cpu/br28/liba/btstack.a.llvm.343146.l2cap.c,l2cap_signaling_handler_channel,pl
 -r=cpu/br28/liba/btstack.a.llvm.343146.l2cap.c,l2cap_signaling_handler_dispatch,pl
 -r=cpu/br28/liba/btstack.a.llvm.343146.l2cap.c,clear_sniff_cnt,l
--r=cpu/br28/liba/btstack.a.llvm.343146.l2cap.c,l2cap_connection_update_request_just,pl
+-r=cpu/br28/liba/btstack.a.llvm.343146.l2cap.c,l2cap_connection_update_request_just,l
 -r=cpu/br28/liba/btstack.a.llvm.343146.l2cap.c,l2cap_acl_handler,pl
 -r=cpu/br28/liba/btstack.a.llvm.343146.l2cap.c,l2cap_packet_handler,pl
 -r=cpu/br28/liba/btstack.a.llvm.343146.l2cap.c,gap_request_connection_parameter_update,pl
@@ -9820,12 +9814,12 @@ cpu/br28/liba/btstack.a.llvm.2207106.att_send.c
 -r=cpu/br28/liba/btstack.a.llvm.2207106.att_send.c,config_asser,l
 -r=cpu/br28/liba/btstack.a.llvm.2207106.att_send.c,CONFIG_BTCTLER_TWS_ENABLE,l
 cpu/br28/liba/btstack.a.llvm.2252410.client_user.c
--r=cpu/br28/liba/btstack.a.llvm.2252410.client_user.c,user_client_report_search_result,pl
+-r=cpu/br28/liba/btstack.a.llvm.2252410.client_user.c,user_client_report_search_result,l
 -r=cpu/br28/liba/btstack.a.llvm.2252410.client_user.c,user_client_report_descriptor_result,pl
 -r=cpu/br28/liba/btstack.a.llvm.2252410.client_user.c,printf,l
 -r=cpu/br28/liba/btstack.a.llvm.2252410.client_user.c,put_buf,l
 -r=cpu/br28/liba/btstack.a.llvm.2252410.client_user.c,user_client_search_descriptor_is_enable,pl
--r=cpu/br28/liba/btstack.a.llvm.2252410.client_user.c,user_client_report_data_callback,pl
+-r=cpu/br28/liba/btstack.a.llvm.2252410.client_user.c,user_client_report_data_callback,l
 -r=cpu/br28/liba/btstack.a.llvm.2252410.client_user.c,user_client_set_search_complete,pl
 -r=cpu/br28/liba/btstack.a.llvm.2252410.client_user.c,user_client_gatt_event,pl
 -r=cpu/br28/liba/btstack.a.llvm.2252410.client_user.c,gatt_client_discover_characteristics_for_service,l