first

include_lib/update/update.h

@@ -0,0 +1,161 @@
+#ifndef _UPDATE_H_
+#define _UPDATE_H_
+
+#include "typedef.h"
+
+extern u32 UPDATA_BEG;
+
+#define UPDATA_FLAG_ADDR		((void *)((u32)&UPDATA_BEG + 0x08))
+#define BOOT_STATUS_ADDR		((void *)((u32)&UPDATA_BEG)) //预留8个bytes
+
+#define UPDATA_MAGIC            (0x5A00)        //防止CRC == 0 的情况
+
+typedef enum {
+    UPDATA_NON = UPDATA_MAGIC,
+    UPDATA_READY,
+    UPDATA_SUCC,
+    UPDATA_PARM_ERR,
+    UPDATA_DEV_ERR,
+    UPDATA_KEY_ERR,
+} UPDATA_RESULT;
+
+typedef enum {
+    USB_UPDATA = UPDATA_MAGIC,      //0x5A00
+    SD0_UPDATA,                     //0x5A01
+    SD1_UPDATA,
+    PC_UPDATA,
+    UART_UPDATA,
+    BT_UPDATA,
+    BLE_APP_UPDATA,
+    SPP_APP_UPDATA,
+    DUAL_BANK_UPDATA,
+    BLE_TEST_UPDATA,
+    NORFLASH_UPDATA,
+    //NOTE:以上的定义不要调整,新升级方式在此添加,注意加在USER_NORFLASH_UFW_UPDATA之前;
+    USER_NORFLASH_UFW_UPDATA,
+
+    NON_DEV = 0xFFFF,
+} UPDATA_TYPE;
+
+// sd
+enum {
+    SD_CONTROLLER_0 = 1,
+    SD_CONTROLLER_1,
+};
+enum {
+    SD0_IO_A = 1,
+    SD0_IO_B,
+    SD1_IO_A,
+    SD1_IO_B,
+    SD0_IO_C,
+    SD0_IO_D,
+    SD0_IO_E,
+    SD0_IO_F,
+};
+typedef struct _UPDATA_SD {
+    u8 control_type;
+    u8 control_io;
+    u8 online_check_way;
+    u8 max_data_baud;
+    u16 wDevTimeOutMax;
+    u8 per_online_status;
+    u8 hc_mode;
+    u8(*io_det_func)(void);
+    u8 power;
+    u8 control_io_clk;
+    u8 control_io_cmd;
+    u8 control_io_dat;
+} UPDATA_SD;
+
+// uart
+typedef struct _UPDATA_UART {
+    u32  control_io_tx;      //<IO口对接
+    u32  control_io_rx;      //<IO口对接
+    u32  control_baud;        //<波特率
+    u32  control_timeout;  //<超时，单位10ms
+} UPDATA_UART; /*共12个bytes*/
+
+
+#define UPDATE_PARAM_MAGIC		0x5441
+#if (USE_SDFILE_NEW == 1)
+typedef struct _UPDATA_PARM {
+    u16 parm_crc;
+    u16 parm_type;              //UPDATA_TYPE:sdk pass parm to uboot
+    u16 parm_result;            //UPDATA_TYPE:uboot return result to sdk
+    u16 magic;					//0x5441
+    //8byte
+    union {
+        struct {
+            u8  file_path[32];         //updata file path
+        };
+        struct {
+            u8  file_patch[32];         //updata file path
+        };
+    };
+    u8  parm_priv[32];          //sd updata
+    //64byte
+    u32 ota_addr;
+    u16 ext_arg_len;
+    u16 ext_arg_crc;
+    //8 byte
+} UPDATA_PARM;
+
+enum EXT_ARG_TYPE {
+    EXT_LDO_TRIM_RES = 0,
+    EXT_JUMP_FLAG,
+    EXT_TYPE_MAX = 0xff,
+};
+
+struct ext_arg_t {
+    u8 type;
+    u8 len;
+    u8 *data;
+};
+
+//8+64+8+32 =112;
+#else
+typedef struct _UPDATA_PARM {
+    u16 parm_crc;
+    u16 parm_type;              //UPDATA_TYPE:sdk pass parm to uboot
+    u16 parm_result;            //UPDATA_TYPE:uboot return result to sdk
+    u8  file_patch[32];         //updata file patch
+    u8  parm_priv[32];          //sd updata
+} UPDATA_PARM;
+#endif
+#define UPDATE_PRIV_PARAM_LEN	32
+
+void update_mode_api_v2(UPDATA_TYPE type, void (*priv_param_fill_hdl)(UPDATA_PARM *p), void (*priv_update_jump_handle)(int type));
+void update_param_priv_fill(UPDATA_PARM *p, void *priv, u16 priv_len);
+u16 update_result_get(void);
+bool device_is_first_start();
+int update_result_deal();
+void update_result_set(u16 result);
+void update_clear_result();
+bool update_success_boot_check(void);
+typedef u8(*update_handler_t)(void);
+
+typedef enum _UPDATE_STATE_T {
+    UPDATE_TASK_INIT,
+    UPDATE_CH_INIT,
+    UPDATE_CH_SUCESS_REPORT,
+    UPDATE_CH_EXIT,
+} UPDATE_STATE_T;
+
+struct update_target {
+    char *name;
+    update_handler_t driver_close;
+};
+
+//void update_param_private_fill_handle_register(void (*handle)(UPDATA_PARM *p));
+
+#define REGISTER_UPDATE_TARGET(target) \
+        const struct update_target target sec(.update_target)
+
+
+extern const struct update_target update_target_begin[];
+extern const struct update_target update_target_end[];
+
+#define list_for_each_update_target(p) \
+    for (p = update_target_begin; p < update_target_end; p++)
+
+#endif